A Study on Behaviour of V and Trapezoidal Type of Folded Plate Roofs for Fixed and Hinged Boundary Conditions

  • Authors

    • Roopa LaxmiYerdoor
    • y R Suresh
    https://doi.org/10.14419/ijet.v7i3.34.19573
  • Folded Plate roof, Linear static analysis, Prismatic, Displacements, Bay width, Finite element analysis, Stiffness.

  • Abstract

    Folded plate roofs are very useful form of roof structures for spanning large column free areas, which composed of a number of flat thin plates connected to each other. In this paper, linear static analysis is performed to study the behaviour of two types of single span prismatic folded plate roof. Different parameters considered for the study are height, bay width, thickness and varying boundary conditions. The results are obtained in the form of variation of displacement and percentage reduction in displacement for different thickness which are useful for selecting economic sections and predicting stiffness.

     

     

  • References

    1. [1] C. B Wilby, Concrete Folded Plate Roofs : Elsevier Butterworth Heinemann, 1998

      [2] Ramaswamy G.S, Design and construction of Concrete Shell Roofs :CBS publishers and distributors, New Delhi, 1998.

      [3] S. Haldar and A.H Sheikh, “Bending Analysis of Composite Folded Plate Roofs by Finite Element Methodâ€, Finite Elements in Analysis and Design 47, pp. 477-485, Elsevier, 2011.

      [4] WojciechGilewski, Jan pelczynski and Pulinastawarz, “ AComparative Analysis of Origami inspired Folded Plate Roofsâ€, Procedia Engineering 91, pp. 220-225, Elsevier, 2014.

      [5] J.N Banndhyopadyaya and P.K Lad, “Comparative Analysis of Folded Plate Structuresâ€, Computers and Structures 36 (2) pp. 291-296, Pergamon Press plc, 1990.

      [6] Saurabh Chauhan, “Folded Plate Structuresâ€, M. Tech thesis, Indian Institute of Technology, Roorkee, India, May 2016.

      [7] IS 2210:1988, Criteria for Design of Concrete Shell Structures and Folded Plates, Bureau of Indian Standards, New Delhi.

      [8] IS 875:1987(Part2), Code of Practice for Design Loads for Buildings and Structures, Bureau of Indian Standards, New Delhi.

      [9] IS 456:2000, Code of Practice for Plain and Reinforced Concrete, Bureau of Indian Standards, New Delhi.

  • Downloads

  • How to Cite

    LaxmiYerdoor, R., & R Suresh, y. (2018). A Study on Behaviour of V and Trapezoidal Type of Folded Plate Roofs for Fixed and Hinged Boundary Conditions. International Journal of Engineering & Technology, 7(3.34), 845-850. https://doi.org/10.14419/ijet.v7i3.34.19573

    Received date: 2018-09-12

    Accepted date: 2018-09-12