A Review on Preparation of Medium Density Fiberboard with Different Materials

  • Authors

    • N Pugazhenthi
    • P Anand
    https://doi.org/10.14419/ijet.v7i3.34.19708
  • Medium density fiberboard, urea formaldehyde, additives, resin

  • Abstract

    The number of papers had reviewed on natural composites recently, but related to medium density fiberboard there is no any review. So this paper completely concentrates on the preparation of medium density fiberboard. The MDF plays an important role in wood industries for manufacturing the furniture’s and interior design at home. Generally MDF was prepared with fibers and with some synthetic resins, additives if necessary. There were various fibers and resins used to prepare the board for different applications. Here this paper describes about the various types of materials like wheat straw, banana stem, rubber wood, etc., and various resins like urea formaldehyde, phenol formaldehyde, etc., were used for the preparation of MDF. The main purpose of discussing about MDF preparation was to know different methods of making the board. This will helps the researchers for further research on MDF material selection and processing of board making.

     

     

  • References

    1. [1] K.L. Pickering , M.G. Aruan Efendy, T.M. Le, A Review Of Recent Developments In Natural Fiber Composites And Their Mechanical Performance: Composites: Part A 83 (2016) 98–112

      [2] N Ayrilmis, S Jarusombuti, V Fueangvivat & P Bauchongkol, Effects Of Thermal Treatment Of Rubberwood Fibers On Physical And Mechanical Properties Of Medium Density Fiberboard: Journal Of Tropical Forest Science 23(1): 10–16 (2011)

      [3] Beatriz Rivela, M Teresa Moreira And Gumersindo Feijoo, Life Cycle Inventory Of Medium Density Fiberboard: Int J LCA 12 (3) 143 – 150 (2007)

      [4] MA Norul Izani, MT Paridah, MY Mohd Nor & UMK Anwar, Properties Of Medium-Density Fiberboard (Mdf) Made From Treated Empty Fruit Bunch Of Oil Palm: Journal Of Tropical Forest Science 25(2): 175–183 (2013)

      [5] Yuliati Indrayani, Dina Setyawati, Kenji Umemura & Tsuyoshi Yoshimura, Decay Resistance Of Medium Density Fiberboard (MDF) Made From Pineapple Leaf Fiber: J. Math. Fund. Sci. Vol. 47, No. 1, 2015, 76-83

      [6] K. Y. KENNETH Chung, R. JOHN Cuthbert, GRAHAM S. Revell, SARA G. Wasself And NICK SUMMERS, A Study On Dust Emission, Particle Size Distribution And Formaldehyde Concentration During Machining Of Medium Density Fiberboard: Ann. Occup. Hyg., Vol. 44, No. 6, Pp. 455-466, 2000

      [7] C. W. Nguong, S. N. B. Lee, And D. Sujan, A Review On Natural Fiber Reinforced Polymer Composites: International Journal Of Chemical, Molecular, Nuclear, Materials And Metallurgical Engineering Vol:7, No:1, 2013

      [8] Hüdaverdi EROĞLU, Abdullah İSTEK, Mustafa USTA, Medium Density Fiberboard (Mdf) Manufacturing From Wheat Straw (Triticum Aestivum L.) And Straw Wood Mixture: Journal Of Engineering Sciences 2001 7 (2) 305-311

      [9] Nadir Ayrilmis, Zeki Candan, Turgay Akbulut1, Ozgur D. Balkiz2, Effect Of Sanding On Surface Properties Of Medium Density Fiberboard: DRVNA INDUSTRIJA 61 (3) 175-181 (2010)

      [10] Andrew K. Kercher, Dennis C. Nagle, E Valuation Of Carbonized Medium-Density Fiberboard For Electrical Applications: Carbon 40 (2002) 1321–1330

      [11] H Rokiah1, AH Siti Hazneza, S Othman, I Norli, I Mahamad Hakimi, MJ Hasnah & U Salmiah, Extractable Formaldehyde From Waste Medium Density Fiberboard: Journal Of Tropical Forest Science 21(1): 25–33 (2009)

      [12] Nadir Ayrilmis And Jerrold E. Winandy, Effects Of Post Heat-Treatment On Surface Characteristics And Adhesive Bonding Performance Of Medium Density Fiberboard: Materials And Manufacturing Processes, 24: 594–599, 2009

      [13] Richard J.T. Lin1, Jeroen Van Houts And Debes Bhattacharyya, Machinability Investigation Of Medium-Density Fiberboard: Holzforschung, Vol. 60, Pp. 71–77, 2006

      [14] S.Mazhan, A.M.Ahmad Zaidi, Mechanical Properties Of Medium Density Fiberboard Composites Material Using Recycled Rubber And Coconut Coir: Journal Of Engineering

      [15] S. Nami Kartala, Frederick Green, Decayand Termite Resistance Of Medium Densityfiberboard (MDF) Made From Di&Erent Wood Species: International Biodeterioration & Biodegradation 51 (2003) 29 – 35

      [16] Mohammed Nasir, Arungupta N, Mohammad Dalourhossenbeg, Gekkeechua, Anujkumar, Fabrication Of Medium Density Fiberboard From Enzyme Treated Rubberwood (Hevea Brasiliensis) Fiber And Modified Organosolv Lignin: International Journal Of Adhesion & Adhesives 44 (2013) 99–104

      [17] Zawawi Ibrahim, Astimar Abdul Aziz, Ridzuan Ramli, Anis Mokhtar, Sijoon Lee, Effect Of Refining Parameters On Medium Density Fiberboard (MDF) Properties From Oil Palm Trunk (Elaeis Guineensis): Journal Of Composite Materials, 2013, 3, 127-131

      [18] Nadir Ayrilmis, Effect Of Compression Wood On Dimensional Stability Of Medium Density Fiberboard: Silva Fennica 42(2), 2008

      [19] Pardeep Ranga, Dr. Sandeep Singhal, Dr. Inderdeep Singh, A Review Paper On Natural Fiber Reinforced Composite: International Journal Of Engineering Research & Technology (IJERT) Vol. 3 Issue 2, February – 2014 ISSN: 2278-0181

      [20] N.Pugazhenthi, J.Thamilarasan and A.Sathesh Kumar, Preparation And Properties Of Phenol-Formaldehyde Resin Reinforced With Recycled Cellulose Fiber: International Journal of Mechanical Engineering and Technology (IJMET) Volume 8, Issue 5, May 2017, pp. 59–64

      [21] N.Pugazhenthi, A.Sathesh kumar, K.Mohan Babu, K.Sureshkumar, Mechanical Properties of urea-formaldehyde Reinforced With Nano - Hydroxy Apatite: International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.50 (2015)

  • Downloads

  • How to Cite

    Pugazhenthi, N., & Anand, P. (2018). A Review on Preparation of Medium Density Fiberboard with Different Materials. International Journal of Engineering & Technology, 7(3.34), 962-965. https://doi.org/10.14419/ijet.v7i3.34.19708

    Received date: 2018-09-16

    Accepted date: 2018-09-16