Driven Camshaft Power Mechanism of the Vehicle Diesel Engine Fuel Pump
-
2018-09-15 https://doi.org/10.14419/ijet.v7i4.3.19723
-
Camshaft, Diesel Engine, Fuel Pump, Kinematic Diagram, Partial Modes of Diesel Engine Operation. -
Abstract
The article deals with the actual problem associated with poor-quality operation of vehicle engines with incomplete loading and operation at partial high-speed modes. It is shown that such engine operating modes make up the bulk of the time, especially when the vehicle operates in urban conditions. Poor engine performance in these modes results in decline in fuel economy and environmental performance. To improve the technical performance of diesel engines, a device is proposed that allows control the uneven rotation of camshaft of vehicle diesel fuel pump. The kinematic schemes of the angular velocity transducers for fuel pump camshaft power mechanism, the kinematic and power drive calculation method are developed.
Â
 -
References
[1] Patrakhaltsev NN, Strashnov SV, Melnik IS, Kornev BA, “Izmenenie chisla rabotayushchikh tsilindrov dizelya - variant povysheniya ekonomichnosti ego rezhimov malykh nagruzokâ€, Avtomobilnaya promyshlennost, No. 2, (2012) рр. 11-13, (in Russian).
[2] Napkhonenko NV, Karaeva MR, “Mnogofaktornaya optimizatsiya sistyemy gorodskikh passazhirskikh pyeryevozok s ispolzovaniyem gyenyetichyeskogo algoritmaâ€, Bulletin of the South-Russian State Technical University (NPI), No. 4, (2011), рр. 64-69, (in Russian).
[3] Napkhonenko NV, Karaeva MR, “Optimizatsiya sistyemy passazhirskikh pyeryevozok s uchyetom dinamichno myenyayushchikhsya passazhiropotokovâ€, Bulletin of the South-Russian State Technical University (NPI), No. 4, (2013) рр. 109-112, (in Russian).
[4] Moroz ММ, Korol SО, Boiko YО, “Social traffic monitoring in the city of Kremenchukâ€, Actual Problems of Economics, No. 1 (175), (2016), рр. 385-398.
[5] Patrakhaltsev NN, Neustanovivshiesya rezhimy raboty dvigateley vnutrennego sgoraniya, Moscow: RUDN, (2009), (in Russian)
[6] Gorbunov PV, Efros VV, “Uluchshenie toplivopodachi na chastichnykh rezhimakh dizeley vnedorozhnoy tekhnikiâ€, Traktory i selskokhozyaystvennye mashiny, No. 5, (2007), рр. 30-32, (in Russian).
[7] Efros VV, Gorbunov PV, “Puti sovershenstvovaniya toplivopodachi v dizelyakh vnedorozhnoy tekhnikiâ€, Traktory i selskokhozyaystvennye mashiny, No. 4, (2007), рр. 31-34, (in Russian).
[8] Korol SO, Moroz MM, Korol SS, Serhiienko SA, “Method and device for increase of weight charging of four-stroke engine cylindersâ€, Scientific Bulletin of National Mining University, No. 5 (161), (2017) pp: 56-61.
[9] Abramchuk FI, Vrublevskiy AN, Denisov AV, “Povyshenie ekologo-ekonomicheskikh pokazateley avtomobilnogo dizelya putem modifikatsii protsessa vpryskivaniya toplivaâ€, Avtomobilnyy transport, Vol. 16, (2005) рр. 303-305, (in Russian).
[10] Gritsyuk A. V. “Novye vozmozhnosti razdelennoy toplivnoy sistemy neposredstvennogo deystviya dlya uluchsheniya pokazateley malolitrazhnogo dizelyaâ€, Dvigateli vnutrennego sgoraniya, No. 2, (2009), рр. 32-35, (in Russian).
[11] Vrublevskiy AN, Denisov AV, Grigorev AL, “Otsenka vozmozhnosti stupenchatogo vpryskivaniya topliva v tsilindr dizelya 4DTNA s pomoshchyu dvukhpruzhinnoy forsunkiâ€, Dvigateli vnutrennego sgoraniya, No. 2, (2006), рр. 97-101, (in Russian).
[12] Patrakhaltsev NN, Kazakov SA, Fernando Kumara PID, “Pokazateli kachestva protekaniya neustanovivshikhsya rezhimov razgonov dizelya posle puskovâ€, Avtomobilnaya promyshlennost, No. 3, (2011), рр. 35-38. (in Russian).
[13] Kukhar VV, Vasylevskyi OV, “Experimental research of distribution of strains and stresses in work-piece at different modes of stretch-forging with rotation in combined diesâ€, Metallurgical and Mining Industry, No. 3, (2014) pp: 71-78.
[14] Kukhar V, Artiukh V, Butyrin A, Prysiazhnyi A, “Stress-Strain State and Plasticity Reserve Depletion on the Lateral Surface of Workpiece at Various Contact Conditions during Upsettingâ€, Advances in Intelligent Systems and Computing, Vol. 692, (2018) pp: 201–211.
-
Downloads
-
How to Cite
Ðœoroz, M., Korol, S., Chernenko, S., Boiko, Y., & Vasylkovskyi, O. (2018). Driven Camshaft Power Mechanism of the Vehicle Diesel Engine Fuel Pump. International Journal of Engineering & Technology, 7(4.3), 135-139. https://doi.org/10.14419/ijet.v7i4.3.19723Received date: 2018-09-16
Accepted date: 2018-09-16
Published date: 2018-09-15