The Influence of Inorganic Fillers on the Protective Properties of Epoxy Polymer Composite Materials
-
2018-09-15 https://doi.org/10.14419/ijet.v7i4.3.19804
-
acid-base interaction, composite material, epoxy polymer, inorganic filler, protective properties. -
Abstract
The influence of regularities of the chemical-mineralogical nature, the dispersity, and the surface properties of inorganic fillers on the protective properties of epoxy polymer composite materials have been investigated. Polymeric compositions based on epoxy resin of ED-20 brand and aliphatic amine curing agent of diethylenetriamine of DETA brand have been chosen as the research materials. The fillers were the air-dry dispersed materials of different nature: oxide, clay and quartz. The resistance of the composites to water and aqueous solutions (absorbency) was investigated by dipping the samples into an aggressive aqueous medium. For the received samples of the filled composites, thermogravimetric (TG) and differential scanning calorimetry (DSC) method were used using the SDT Q600 device manufactured by TA Instruments (USA). It has been found that the thermal stability and the absorbing capacity of the filled composites in water and aqueous acidic and alkaline mediums correlate with each other. It has been shown that to obtain materials with improved protective characteristics, it is necessary to use oxide or clay fillers with the basic (alkaline) surface function.
Â
Â
-
References
[1] Khorokhordin AM, Khorokhordina AYe, Rudakov OB, “Epoksidnyie kompozitsii v stroitelstve (obzor)â€, Scientific Bulletin of the Voronezh State University of Architecture and Civil Engineering, No.1(14), (2017), pp.7-18.
[2] Eselev AD, “Promising European trends in the use of epoxy-based compoundsâ€, Polymer Science. Series D, Vol.2, Is.2, (2009), pp.71-74, doi: 10.1134/s199542120902001472.
[3] Rassokha AN, Cherkashina AN, “Development of high-furan-epoxy materials for the construction industryâ€, Eastern-European Journal of Enterprise Technologies, No.3/6(81), (2016), pp.38-44, doi: 10.15587/1729-4061.2016.71266.
[4] Van Gemert Dionys, Vanden Bosch Marc, “Reinforcement of masonry by injection of epoxy resin. [RENFORCEMENT DES MACONNERIES PAR INJECTION DE RESINE EPOXY]â€, Reports of the Working Commissions International Association for Bridge and Structural Engineering, No.46, (1983), pp.403-408, doi: 10.5169/seals-35875.
[5] Imbrogno Marc, Saito Macoto, Kliger Howard, “Development of low temperature cure resin systems for external sheet reinforcement of concrete structuresâ€, International SAMPE Symposium and Exhibition (Proceeding), Vol.4, (1999).
[6] Abaubakr SH, Kondil UF, Reda Taha M, “Creep of epoxy-clay nanocomposite adhesive at the FRP interface: a multi-scale investigationâ€, International Journal of Adhesion and Adhesives, No.54, (2014), pp. 1-12, doi: 10.1016/j.ijadhadh.2014.04.003.
[7] During John D, “Comparisons of epoxy technology for protective coating and linings in wastewater facilitiesâ€, Journal of Protective Coating and Linings, Vol.1, No.5, (2000), pp. 49-54.
[8] Queiroz DPR, Fraisse F, Fayolle B, Kuntz M, Verdu J, “Radiochemical againg of epoxy coating for nuclear plantsâ€, Radiation Physic Chemistry, Vol.79, No.3, (2010), pp.362-364.
[9] Roschina SI, Lukin MV, Lukina AV, Lisyatnikov MS, “Recovery wooden beams impregnating polymer composition based on epoxy resinsâ€, Forestry Engineering Journal, No.3, (2015), pp.183-190, doi: 10.12737/14167.
[10] Nadir A, Alperen K, Turker G, “Potential use of decayed wood in production of wood plastic compositeâ€, Industrial Crops and Products, No.15, (2015), pp.279-284.
[11] Rahul K, Kausik K, “Study of mechanical properties of wood dust reinforced epoxy compositeâ€, Procedia Material Science, No.6, (2014), pp.551-556.
[12] Cardiano P, Sergi S, Lazzari M, Piraino P, “Epoxy-silica polymers as restoration materialsâ€, Polymer, Vol.43, No.25, (2002), pp.6635-6640, doi: 10.1016/s0032-3861(02)00677-8.
[13] Cardiano P, Mineo P, Sergi S, Ponterio RC, Triscari M, Piraino P, “Epoxy-silica polymers as restoration materials. Part IIâ€, Polymer, Vol.44, No.16, (2003), pp.4435-4441.
[14] Cardiano P, “Epoxy-silica hybrids as stone restoration materialsâ€, Annali di Chimica, Vol.93, No.11, (2003), pp.947-958.
[15] Cardiano P, Ponterio RC, Sergi S, Lo Schiavo S, Piraino P, “Epoxy-silica hybrids as stone conservation materialsâ€, Polymer, Vol.46, No.6, (2005), pp.1857-1864, doi: 10.1016/j.polymer.2005.01.002.
[16] Karayannidou EG, Achilias DS, Sideridou ID, “Cure kinetics of epoxy-amine resins used in the restoration of works of art from glass or ceramicâ€, European Polymer Journal, Vol.42, No.12, (2006), pp.3311-3323.
[17] Pohl G, Textiles, Polymers and Composites for Buildings, Woodhead Publishing, (2010), 512p., doi: 10.1533/9780845699994.
[18] Fink J, Reactive Polymers: Fundamentals and Applications, William Andrew, (2017), 800p.
[19] Dasari A, Yu ZZ, Cai GP, Mai Y-W, “Resent developments in the fire retardancy of polymeric materialsâ€, Prog. Polym. Sci, Is. 38, (2013), pp.13571387, doi: 10.1016/j.progpolymsci.2013.06.006.
[20] Rui Li, Zhang Haoruo, Zhou Cheng, Zhang Bin, Chen Yang, Zow Huawei, Liang Mei, “The thermal stability investigation of microencapsulated ammonium polyphosphate/siloxane – modified epoxy resin compositesâ€, J. of Appl. Polym. Sci, Vol.134, Is.36, (2017), pp.45272-45280, doi: 10.1002/app.45272.
[21] Fu Y-X, He Z-X, Mo D-C, “Thermal conductivity enhancement with different fillers for epoxy resinâ€, Adhesives Appl. Therm, Eng.66, (2014), pp.493-498, doi: 10.1016/j.applthermaleng.2014.02.044.
[22] Andronov V.A, Danchenko Yu.M, Skripinets A.V, Bukhman O.M, “Efficiency of utilization of vibration-absorbing polimer coating for reducing local vibrationâ€, Scientific Bulletin of National Mining University, No.6, (2014), pp.85-91.
[23] Danchenko Yu, Andronov V, Barabash E, Obigenko T, Rybka E, Meleshchenko R, Romin A, “Research of the intermolecular interactions and structure in epoxyamine composites with dispersed oxidesâ€, Eastern-European Journal of Enterprise Technologies, Vol.6, Is.12(90), (2017), pp.4-12, doi: 10.15587/1729-4061.2017.118565.
[24] Danchenko Yu, Andronov V, Teslenko M, Permiakov V, Rybka E, Meleshchenko R, Kosse A, “Study of the free surface energy of epoxy composites using an automated measurement systemâ€, Eastern-European Journal of Enterprise Technologies, Vol.1, Is.12(91), (2018), pp.9-17, doi: 10.15587/1729-4061.2018.120998.
[25] Roman F, Montserrat S, Hutchinson JM, “On the effect of montmorillonite in the curing reaction of epoxy nanocompositesâ€, Journal of Thermal Analysis and Calorimetry, V.87, No.1, (2007), pp.113-118. Doi: 10.1007/s10973-006-7830-9.
[26] Kovaleva E.G, Radoutskii V.Yu, “Epoksidnyie polimery v stroitelstve: problemy I perspektivyâ€, Vestnik Belgorodskogo gosudarstvennogo universiteta imeni V.G. Shukhova, No.2, (2011). pp.39-42.
[27] Lebedev Ye.V, Saveliev Yu.V, Koliada V.M, “Funktsionalni polimery ta kompozitsiini materialy na ikh osnovi dlia budivnitstvaâ€, Budivelni materialy, vyrobu ta sanitarna tekhnika, No.42, (2011), pp.76-80.
[28] Tiburcio AC, Manson JA, “The effects of filler/polymer acid-base interactions in model coating systemsâ€, Acid-Base Interactions: Relevance to Adhesion Science and Technology, Utrecht, the Netherlands, Tokyo, Japan, (1991), pp.313-328.
[29] Weissenbach K, Mack H, “Silane coupling agentsâ€, Functional Fillers for Plastics, WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, (2005), pp.59-83, doi: 10.1002/3527605096.ch4.
[30] Tarasevich YuI, Poverkhnostnyie yavleniia na dispersnykh materialakh, Naukova Dumka, Kyiv, (2011), 390 p.
[31] Malyovanyi Ðœ, Sakalova G, Chornomaz N, Nahurskyy O, “Some kinetic regularities of intracellular substance extractingâ€, Chemistry and chemical technology, Vol.7, Is.3, (2013), Ñ€p.198-208.
[32] Danchenko Yu, Andronov V, Kariev A, Lebedev V, Rybka E, Meleshchenko R, Yavorska D, “Investigation of surface properties of dispersive fillers based on plant raw materialsâ€, Eastern-European Journal of Enterprise Technologies, Vol.5, Is.12(89), (2017), pp.20-26, doi: 10.15587/1729-4061.2017.111350.
[33] Danchenko Yu, Andronov V, Rybka E, Skliarov S, “Investigation into acid-basic equilibrium on the surface of oxides with various chemical natureâ€, Eastern-European Journal of Enterprise Technologies, Vol.4, No.12(88), (2017), pp.17-25, doi: 10.15587/1729-4061.2017.108946.
[34] Danchenko Yu, Kachomanova M, Barabash Ye, “The acid-base interaction role in the processes of the filled diane epoxy resin structuringâ€, Chemistry and Chemical Technology, Vol.12, No.2, (2018), pp.188-195, doi: 10.23939/chcht12.02.188.
[35] Shtompel VI, Demchenko VL, Vilenskii VO, Kercha YuYu, “Microheterogenic structure of composites based on epoxy resin and Fe (III) or Al (III) oxideâ€, Polymer Journal, Vol.30, No.3, (2008), pp.233-238.
[36] Talalai AV, Hrihorenko TI, Burmistr MV, Kochergin YuS, “Investigation of ground calcium carbonate in the composition of epoxy compositionsâ€, Issues of Chemistry and Chemical Technology, No.7, (2007), pp.121-123.
[37] Yashchenko LN, “Properties of polysiloxane-containing epoxyurethane nanocomposites of anhydride curingâ€, Ukraine Chemical Journal, V.83, No.4, (2017), pp.73-80.
[38] Leonova NG, Mikhalchuk VM, Beloshenko VA, “Stability to thermooxidative destruction of epoxy-silica cation polymerization compositesâ€, Scientific Bulletin of Donetsk National Technical University, No.17, (2011), pp.86-92.
[39] Zakordonskii VP, Skladaniuk RV, “Mechanism and kinetic features of the initial stages of low-temperature destruction of epoxyamine polymerâ€, Ukraine Chemical Journal, V.64, No.9, (1998), pp.62-68.
[40] Boiko VV, Dmytriieva TV, Bortnytskyi VI, Ebich YuR, Poloz OYu, “Thermostabilization of epoxy composites, hardened polyethylenepolyaminesâ€, Polymer Journal, Vol.37, No.1, (2015), pp.41-48.
[41] Fomin NE, Nizina TA, Yudin VA, Kisliakov PA, Kireiev AA, “Analysis of the thermal properties of nanomodified epoxy compositesâ€, Nanobuild.ru, Vol.6, No.1, (2014), pp.38-50, http://nanobuild.ru/ru_RU/journal/Nanobuild_1_2014_RUS.pdf
[42] Sigareva NV, Gorelov BM, Starokadomskii DL, “Thermal destruction of nanocomposites epoxy resin – silicaâ€, Surface, No.5(20), (2013), pp.206-214.
[43] Danchenko Yu.M, Popov YuV, Sopov VP, “Thermooxydative and thermomechanical stability epoxy polymer composites of construction†International Conference of Thermal Analysis and Calorimetry in Russia (RTAC-2016), Vol.1, (2016), pp.702-706, http://crtac.com/ru/rtac_history/rtac-16/
-
Downloads
-
How to Cite
Danchenko, Y., Andronov, V., Obizhenko, T., Kosse, A., & Khmyrov, I. (2018). The Influence of Inorganic Fillers on the Protective Properties of Epoxy Polymer Composite Materials. International Journal of Engineering & Technology, 7(4.3), 279-283. https://doi.org/10.14419/ijet.v7i4.3.19804Received date: 2018-09-18
Accepted date: 2018-09-18
Published date: 2018-09-15