Energy Efficiency of Binder Application in Concrete

  • Authors

    • Varvara Vinnichenko
    • Alexander Ryazanov
    2018-09-15
    https://doi.org/10.14419/ijet.v7i4.3.19828
  • binders in the composition of concrete, cement clinker, energy, lime, slag, theoretical calculation, thermal effect of clinker formation.

  • Abstract

    Theoretical calculation of the thermal effect of formation of minerals of binders is carried out. The dependence allowing calculating the thermal effect of formation of minerals of lime, gypsum, slag cement, portland cement, dolomite cement is presented. The formula also takes into account the effect of organic components in the mixture. A comparative analysis of the energy efficiency of different types of binder in concrete is carried out. It is shown that the use of slag cement in the production of concrete mix is twice as effective as portland cement. This is due to the presence in the slag of calcium oxide, which does not need energy to carry out the endothermic decarbonization reaction. Lime in the concrete composition has a rate of energy consumption is five times greater. This means, industrial waste which contains calcium oxide (slag, ash and others) can replace natural materials with high efficiency.

     

     

  • References

    1. [1] Key World Energy Statistics, available online: https://www.iea.org/publications/freepublications/ publication/KeyWorld2017.pdf.

      [2] Liquid concrete mix. What is concrete? available online: http://carmix.pro/pages/chto-takoe-beton/.

      [3] Sanytsky M., C. Sobol, T. Markiv, W. Bialczak Composite cements for energy-saving concrete technologies, Budownictwo o zoptymalizowanym potencjale energetycznym (2004), pp. 373—377.

      [4] Hess's Law, available online: https://chem.libretexts.org/Core/Physical_and_Theoretical_Chemistry/Thermodynamics/Thermodynamic_Cycles/Hess%27s_Law

      [5] Khodorov Y. “The furnaces of the cement industryâ€, M.: Promstroiizdat, (1950), рр.10-15.

      [6] H.Vorobyev, D.Mazurov, «Thermotechnical calculation of cement kilns and apparatus», M: Higher School, (1962), рр.117-124.

      [7] Strassen H. «Der theoretische Warmbedarf des Zementbrandes», Zement-Kalk-Gips, (1957), №10, S.1-12.

      [8] Кlassen V. «Zum theoretischen Warmebedarf des Zementbrennens», 13Ibausel, Weimar, (1997).

      [9] Y. L. Wang, "Theoretical Calculation and Experimental Study on the Forming Heat of Cement Clinker Made from Steel Slag", Materials Science Forum, Vol. 814, pp. 564-568, (2015).

      [10] Chinese Building Industry Press, (2007), «The calculation method of heat balance of cement rotary kiln, the heat efficiency, comprehensive energy consumption», JC/T, Р. 730, (2007).

      [11] Ya-Li Wang, Su-Ping Cui , Gui-Ping Tian, «Calculation of Forming Heat of Cement Clinker Made from Calcium Carbide Slag», (2017), Joint International Conference on Materials Science and Engineering Application (ICMSEA 2017) and International Conference on Mechanics, Civil Engineering and Building Materials (MCEBM 2017)

      [12] Building Materials Science Research Institute,2010. Thermal measurement of cement kiln. 2nd ed. Beijing:hinese Building Industry Press.

      [13] Babuchkin V.I., Mchedlov-Petrosian O.P. «Thermodynamics of silicates», Springer-Verlag, (1985), P. 459.

      [14] V. Babushkin, V. Vinnichenko, «Theoretical heat effect and the formation of gases during the thermal treatment of binders»// Building Materials Science - Theory and Practice. - M.: Sekts. "Injection of Stabilized Stability and Conversion", (2006), рр. 52-55.

      [15] Vinnichenko V., Vitsenko N/, Ryazanov Ð. «Theoretical determination of energy consumption for clinker minerals in dolomite clinker», Kharkiv: (2016), Vol. 161, рр. 76-83.

      [16] Vinnichenko, V., Ryazanov, A. «Ecological indices of manufacture of Portland cement clinker and production of the dolomite clinker», (2017), MATEC Web of Conferences 116,01020

      [17] F.L. Kapustin, H.A. Zhitnikov, «Metods of reduction of cement expediture in concrete», available online:http://elar.urfu.ru/bitstream/10995/46301/1/sio_(2011)_14_14.pdf.

      [18] Slag Cement Association, Slag Cement in Concrete, No. 9, Concrete Proportioning, Sugar Land, TX, (2002).

      [19] American Concrete Institute, ACI 233-R, «Ground Granulated Blast-Furnace Slag as a Cementitious Constituent in Concrete», Farmington Hills, MI, (1995).

      [20] Final Report FHWA/IN/JTRP-2005/5 «Technical Issues Related to the Use of Fly Ash and Slag During Late-Fall (Low Temperature) Construction Season», available online:

      [21] https://docs.lib.purdue.edu/cgi/viewcontent.cgi?article=1730&context=jtrp

      [22] Pankaj B A and Hardeep S J S S (2016), “Effect of Steel Slag as a Replacement of Fine Aggregate in M40 Grade of Concreteâ€, International Journal of New Innovations in Engineering and Technology, 5(4), pp. 17-26.

      [23] Khalid R., Apoorv S and R. D Patel (2014), “Strength Analysis of Concrete by Using Iron Slag as a Partial Replacement of Normal Aggregate (Coarse) in Concreteâ€, International Journal of Science and Research, 3(10), pp. 190-193.

      [24] Shetty M.S., “Concrete Technologyâ€, S. Chand and Company Limited. [24] Veena G. Pathan, Md. GulfamPathan, (2014),“Feasibility and Need of Use of Waste Marble Powder in Concrete Productionâ€,IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE).

  • Downloads

  • How to Cite

    Vinnichenko, V., & Ryazanov, A. (2018). Energy Efficiency of Binder Application in Concrete. International Journal of Engineering & Technology, 7(4.3), 335-338. https://doi.org/10.14419/ijet.v7i4.3.19828

    Received date: 2018-09-18

    Accepted date: 2018-09-18

    Published date: 2018-09-15