Application of the Sequential Control for Increasing Competitiveness of Agricultural Products

  • Authors

    • Vladimir Puzik
    • Ludmila Puzik
    • Nina Lyubymova
    • Oksana Pankova
    • Vitalyi Sakhatsky
    2018-09-15
    https://doi.org/10.14419/ijet.v7i4.3.19925
  • Agriculture, Antiseptic, Broccoli, Competitiveness, Management quality, Practice, Products, Sequential control.

  • Abstract

    The competitiveness of agricultural enterprises on the international market depends directly on the professional and timely implementation of decisions of control. Its function stipulates for a number of actions, work out methods and tools which aimed at conservation the quality of agricultural products in the period of its storage and transportation in accordance with the consumer’s requirements.

    Construction of control by a recycling pattern is one of the practical ways to increase the effectiveness of control, when an object that is recognized as fit is subject to repeated checks. The major tasks in the construction of a statistical model of measurement control have been analyzed, a typical monitoring system, a sequential control structure, and its characteristics have been submitted. The suggested control significantly reduces the reject rate in the total mass of products.

    The obtained result of analytical dependencies is convenient for engineering calculations of other types of numerical control.

    An example of the application of sequential control of broccoli cabbage in its storage with helping with antiseptic preparations is given. The influence of various antiseptics on different varieties of broccoli cabbage is considered. Such a study helps the manufacturer find the best opportunities to improve the competitiveness of its products.

     

     

  • References

    1. [1] DSTU ISO 9004 – 2001. System management quality. Decisions on improvement of activities (2001), Derzhstandart of Ukraine. – p.70.

      [2] DSTU 2865 – 94. Control non-destructive. Terms and definitions. (1995). Derzhstandart of Ukraine. – p. 52.

      [3] Bolychevthev A.D., Bolychevtheva L.A. & Shlykov V.A. Sequential control. Control system and its characteristics (2004). M: Journal Metrology. (In Russ.), 9, 3-16.

      [4] Bolychevthev A.D., Multistage measuring control (1990). M: Journal Measuring Technology (In Russ.), 8, 15-17.

      [5] Bolychevthev A.D., Bolychevtheva LA, Bistrythskaya LB & Lyubymova N.A. Sequential control and his mathematic model (2011). (In Ukr.). Journal Bulletin Kherson National Technical University, 3 (42), 99-103.

      [6] Dmitrithenko M.I., Expertise of quality and detection of falsification of food products (2003), (In Belorus., In Ukr.), Minsk, Kiev, – P.137-152.

      [7] Volodarsky E.T., Kuharchuk B.O., Podgarenko G.B. & Serduk G.B., Metrological support measurements and control (2001). (In Ukr.), – Vinnicya: Veles. – p. 219.

      [8] Malaytchuc V.P., Information-measuring technology контролю control non-destructive (2001). (In Ukr. ) Dnipro: RVV DDU. –p.240 .

      [9] Ilyenkova S.D., Management of quality (1998). (In Russ.) М.: Bank and stock exchange. p. 267.

      [10] Bolychevthev A.D., Numerical measurement control increase quality (1990), М: Journal Measuring Technology, (In Russ.) 5, 13-15.

      [11] Fedushin A.I., (2004), One way of improve authenticity numerical measurement control, Kiev: Ukraine Metrology Journal 1, 14-17.

      [12] Bolychevthev A.D. (2000), Control as a guarantor of product quality and requirements for the accuracy of the measuring equipment used M: Journal Metrology. (In Russ.), 11, 20-32.

      [13] Grin I.V. Quality control (2008). Rrasnodar College of Electronic Engeeniring (In Russ.). P.56.

      [14] Byktimirov R.L. Quality control, personal and logistic engeeniring. (2005). S.-P. (In. Russ. ). P. 237.

      [15] Bogdanovych E.N. Statistichesky priyomochny control (2012). Vo ronezh: FGBOU VPO. Voronezh State Technical University. Study guide. – 120 p.

      [16] Dzirkal E.V. N.O. Demidovich`s sequential control method. Dependability. 2014;(3):137-150. (In Russ.) DOI:10.21683/1729-2646-2014-0-3-137-150.[17] Puzik L.M. & Bondarenko V.A. (2014), Aapplication of antimicrobial agents for storing broccoli, Journal Vegetable growing and melons. (In Ukr), Kharkov, 60, 226 – 231.[18] Puzik L.M. & Bondarenko V. (2013), A disease of cabbage broccoli during storage, depending on the treatment with Baikal EM-1 Journal plant growing, selection and seed-growing and vegetable growing (In Ukr.), 9, 231 - 234.

  • Downloads

  • How to Cite

    Puzik, V., Puzik, L., Lyubymova, N., Pankova, O., & Sakhatsky, V. (2018). Application of the Sequential Control for Increasing Competitiveness of Agricultural Products. International Journal of Engineering & Technology, 7(4.3), 507-513. https://doi.org/10.14419/ijet.v7i4.3.19925

    Received date: 2018-09-19

    Accepted date: 2018-09-19

    Published date: 2018-09-15