Development of a Multi-Motor Power System for Vehicles Converted to Electric

  • Authors

    • Correa Zapata Sebastian
    • Vergara Crismatt Carlos
    • Rico Mesa Edgar
    2018-09-22
    https://doi.org/10.14419/ijet.v7i4.5.20042
  • Power, Multiplexation, Conversion, Multi-motor.

  • Abstract

    The GACIPE research group has been developing a project focused on the conversion of an internal combustion car to an electric one, implementing a mechanical and electronic development with the objective of implementing new technologies in the automotive sector by designing drivers to control the speed of multiple 2.2 kw DC motors with a new trigger procedure of the power devices. This project is a small contribution to reducing the effects of climate change.

     

     

  • References

    1. [1] Le Treut, H., R. Somerville, U. Cubasch, Y. Ding, C. Mauritzen, A. Mokssit, T. Peterson and M. Prather «Historical Overview of Climate Change Science». Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA., 2007.

      [2] G. J.-M. Jos G.J. Olivier, «Trends in Global CO2 emissions: 2016 report,» Netherlands Environmental Assessment Agency, The Hague, 2016.

      [3] T. Jayaraman, «The Paris Agreement on Climate Change: Background, Analysis and Implications, » Review of Agrarian Studies, vol. 1, no. 3, pp 42 – 59 , 2015.

      [4] The society of motor manufacturers and traders limited, «New car CO2 Report 2017,» SMMT driving the motor industry, Londres, 2017.

      [5] M. F. B. G. A. P. R. P. A. P. Ã. M. R. L. R. S. C. Luis Gilberto Murillo, «Política nacional de cambio climático: documento para tomadores de decisiones,» Ministerio de Ambiente y Desarrollo Sostenible, Bogota, 2017.

      [6] D. P. A. C. R. B. Muhammed F. Rahman, «Power Electronics Handbook,» Elsevier, Cambridge, 2018

      [7] H. J. J. C. Peng Hemeng, «Analysis for the EMI measurement and propagation path in Hybrid Electric Vehicle,» IEEE Information Technology, Networking, Electronic and Automation Control Conference, vol. 1, nº 1, pp. 1087 - 1090, 2016

      [8] Z. E.-H. F. K. A. A. M. A. G. O. Tabbi Wilberforce, «Developments of electric cars and fuel cell hydrogen electric cars,» International Journal of Hydrogen Energy, vol. 42, nº 40, pp. 25695-25734, 2017

      [9] H. X. W. L. Y. L. L. L. Maobing Li, «The structure and control method of hybrid power source for electric vehicle,» Energy, vol. 112, nº octubre, pp. 1273-1285, 2016

      [10] M. B. T. B. Philipp Hanemann, «Effects of electric vehicle charging strategies on the German power system,» Applied Energy, vol. 203, nº octubre, pp. 608-622, 2017.

      [11] S. A. J. I. K. Zeina Bitar, «Modeling and Simulation of Series DC Motors in Electric Car,» Energy Procedia, vol. 50, nº 50, pp. 460-470, 2014

      [12] M. F. Ashby, «Chapter 10: Case Study: Electric Cars,» de Materials and Sustainable Development, Waltham, Elsevier, 2016, pp. 151-166

      [13] E. X. L. C. Charalampos Marmaras, «Simulation of electric vehicle driver behaviour in road transport and electric power networks,» Transportation Research Part C: Emerging Technologies, vol. 80, nº Julio, pp. 239-256, 2017

      [14] N. Y. J. J. Saharul Arof, «Series motor four quadrants drive DC chopper for low cost, electric car: Part 1: Overall,» IEEE International Conference on Power and Energy , vol. 1, nº 1, pp. 342 - 347, 2014

      [15] A. P. T. D. R. Abdullah Assegaf, « Dynamic response analysis of Permanent Magnet Brushless DC Motor drives for city electric car based on Matlab/Simulink,» Joint International Conference on Rural Information & Communication Technology and Electric-Vehicle Technology, vol. 1, nº 1, pp. 1 - 5, 2013

      [16] Y. K. H. S. Feng Yaojing, «Research of interior permanent magnet brushless DC motor for electric vehicles,» International Conference on Electrical Machines and Systems, vol. 1, nº 1, pp. 1074 - 1079, 2013

      [17] M. Wens, M. Steyaert, Design and Implementation of Fully-Integrated Inductive DC-DC Converters in Standard CMOS, Analog Circuits and Signal Processing Springer , pp 27 – 63, 2011

      [18] James E. Vinson AND J. J. Liou , , «Electrostatic Discharge in Semiconductor Devices: Protection Techniques,», proceedings of the IEEE, vol. 88, No 12, pp 1878 – 1900, 2000.

      [19] Robin Getz, Bob Moeckel , «Understanding and Eliminating EMI in Microcontroller Applications,» , Texas Instruments, 30 p, 1996.

      [20] Tom Williamson , «Designing Microcontroller Systems for Electrically Noisy Environments » Intel , 26 p, 1993

  • Downloads

  • How to Cite

    Zapata Sebastian, C., Crismatt Carlos, V., & Mesa Edgar, R. (2018). Development of a Multi-Motor Power System for Vehicles Converted to Electric. International Journal of Engineering & Technology, 7(4.5), 188-192. https://doi.org/10.14419/ijet.v7i4.5.20042

    Received date: 2018-09-22

    Accepted date: 2018-09-22

    Published date: 2018-09-22