Development of Vibrator Feeding Mechanism Using Two Sets of Rollers for the Separation of Ball Grading For Industry Benefits

  • Authors

    • S. P. Sundar Singh Sivam
    • K. Saravanan
    • N. Pradeep
    • S. Rajendra Kumar
    • Shubhang Mathur
    • Usama Dingankar
    • Anurag Arora
    2018-09-22
    https://doi.org/10.14419/ijet.v7i4.5.20045
  • Metrology, Low Cost Automation, Ball Grading

  • Abstract

    The study aims to provide an Automatic Feeder Machine to inspect the Ball diameter to eliminate any parallax error and to reduce the measuring time significantly also to create an ergonomic environment for the operator. The measurement of Steel Ball diameter which is very much important needs to measure 100% before assembly. The inspection is done manually by using Micrometer which takes more time and possibility committing parallax error by operator. The micrometer needs to calibrate with master very frequently. The micrometers are normally used to measures very precision parts in rare frequency only. The possibility of mixing up rejected with acceptable items is very common in this type of inspection. The balls which are measured manually are kept separately according to the ball diameters. Due to high measurement ratio of the balls, operator by mistake passes the rejected balls in to right balls. To avoid this problem, this study focused on to develop the automatic inspection machine of vibrator feeding mechanism for balls to improve the accuracy of inspection and reduce the inspection time.

     

     

  • References

    1. [1] Mounting device for vibrator feeding mechanism, Patents US 3191894 A, ZUSAMMENFASSUNG auf verfügbar

      [2] Asymmetrically accelerated vibrator for feeding materials, Patents US 4593603 A ZUSAMMENFASSUNG

      [3] Powder-feeding apparatusUS 2800252 A Patents.

      [4] Cam operated ribbon vibrator and ribbon feed mechanism US 3237747 A.

      [5] Vibrators Patents (Class 177/DIG11) , Patents

      [6] Vibrator feed for auger conveyor DE 3373086 D1

      [7] Controllable supply or feed circuit for electromagnetic vibrators, Patents US 3346780 A.

      [8] Confectionery delivery mechanism for conveyor belt - has vibrator under feed conveyor from hopper and rotary brush at transfer point between conveyors, Patents. DE 2104704 B2.

      [9] Asymmetrically accelerated vibrator for feeding materials, Patents EP 0231406 A3,

      [10] Electromechanical vibrator assembly for a time piece , Patents, US 3469389 A.

      [11] S.P. Sundar Singh Sivam, M.Gopal , S.Venkatasamy, Siddhartha Singh, An Experimental Investigation And Optimisation Of Ecological Machining Parameters On Aluminium 6063 In Its Annealed And Unannealed Form, Journal Of Chemical And Pharmaceutical Sciences. Page No Page (46 – 53), 2015.

      [12] S.P. Sundar Singh Sivam, V.G Umasekar, Shubham Mishra, Avishek Mishra, ArpanMondal. “Orbital cold forming technology - combining high quality forming with cost effectiveness - A reviewâ€. Indian Journal of Science and Technology. Vol 9(38), October 2016, DOI: 10.17485/ijst/2016/v9i38/91426.

      [13] S.P.Sundar Singh Sivam, V.G.UmaSekar, K.Saravanan, S RajendraKumar, P.Karthikeyan, K SathiyaMoorthy, “Frequently used Anisotropic Yield Criteria for Sheet Metal Applications: A Reviewâ€, Indian Journal of Science and Technology. Volume 9, Issue 47, December 2016. DOI: 10.17485/ijst/2015/v8i1/92107.

      [14] S.P.Sundar Singh Sivam, V.G.UmaSekar, K.Saravanan, S RajendraKumar, P.Karthikeyan, K Sathiya Moorthy, “Frequently used Anisotropic Yield Criteria for Sheet Metal Applications: A Reviewâ€, Indian Journal of Science and Technology. Indian Journal of Science and Technology. Volume 9, Issue 47, December 2016. DOI: 10.17485/ijst/2015/v8i1/92107.

      [15] S.P. Sundar Singh Sivam, M.Gopal , S.Venkatasamy, Siddhartha Singh, An Experimental Investigation And Optimisation Of Ecological Machining Parameters On Aluminium 6063 In Its Annealed And Unannealed Form, Journal Of Chemical And Pharmaceutical Sciences. Page No Page (46 – 53), 2015.

      [16] S.P. Sundar Singh Sivam, Abburi Lakshman kumar, K. Sathiya Moorthy, RajendraKumar. “Investigation exploration outcome of Heat Treatment on Corrosion Resistance of AA 5083 in Marine Applicationâ€. International Journal of Chemical Sciences (ISSN 0972-768 X). Page No Page (15 – 22), 2015.

      [17] S.P. Sundar Singh Sivam, Mrinal Deepak Ji Bhat, Shashank Natarajan, Nishant Chauhan.†Analysis of residual stresses, thermal stresses, cutting forces and other output responses of face milling operation on ze41 magnesium alloy." International Journal of Modern Manufacturing Technologies, Pp. No 92-100. ISSN 2067–3604, Vol. X, No. 1 / 2018.

      [18] Sivam, S. P. S. S., Saravanan, K., Pradeep, N., Moorthy, K. and Rajendrakumar, S. “The Grey Relational Analysis and Anova to Determine the Optimum Process Parameters for Friction Stir Welding of Ti and Mg Alloysâ€, Periodica Polytechnica Mechanical Engineering. doi: https://doi.org/10.3311/PPme.12117.

      [19] S. SIVAM, S. P. Sundar Singh et al.â€Multi Response Optimization of Setting Input Variables for Getting Better Product Quality in Machining of Magnesium AM60 by Grey Relation Analysis and ANOVA." Periodica Polytechnica Mechanical Engineering, [S.l.], 2017. ISSN 1587-379X. https://doi.org/10.3311/PPme.11034.

      [20] S. P. S. S. Sivam, S. RajendraKumar, S. Karuppiah and A. Rajasekaran, "Competitive study of engineering change process management in manufacturing industry using product life cycle management — A case study," 2017 International Conference on Inventive Computing and Informatics (ICICI), Coimbatore, 2017, pp. 76-81.doi: 10.1109/ICICI.2017.8365247.

  • Downloads

  • How to Cite

    P. Sundar Singh Sivam, S., Saravanan, K., Pradeep, N., Rajendra Kumar, S., Mathur, S., Dingankar, U., & Arora, A. (2018). Development of Vibrator Feeding Mechanism Using Two Sets of Rollers for the Separation of Ball Grading For Industry Benefits. International Journal of Engineering & Technology, 7(4.5), 202-206. https://doi.org/10.14419/ijet.v7i4.5.20045

    Received date: 2018-09-22

    Accepted date: 2018-09-22

    Published date: 2018-09-22