Stress Analysis of Pelton Turbine Distributor Using UG-NX Software

  • Authors

    • Chaman Lal Pal
    • Dr. T.S. Desmukh
    • Dr. V.K.Gahlot
    2018-09-22
    https://doi.org/10.14419/ijet.v7i4.5.20097
  • Analysis, distributor, Pelton, UG-NX software, stress.

  • Abstract

    The main objective of this paper is analysis of stress in the distributor to find out optimum thickness for safe and satisfactory working at different load condition. To describe how different plate segments required fabricating wyes branches to ensure greater reliability. The distributor of Pelton turbine consists of pipe segments and wyes branches which are then connected to nozzle. A wyes branch, where the distributor bifurcates has a very complex shape and is very difficult to design. A practical case of distributor of 6 jets vertical Pelton turbine of 43 MW power has been carried but using UG-NX software.

     

  • References

    1. [1] Argyris J.H. (1954).†Recent Advances in Matrix Methods of Structural Analysisâ€, Pergamon Press, Elmsford, NY.

      [2] Ausoni Ph., Farhat M., Bouziat Y.A., Kueny J.L., Avellan F. (2006),†Karman vortex shedding in the wake of a hydrofoil; Measurement and numerical simulation†IAHR Int. Meeting of WG on cavitations and Dynamic Problems in Hydraulic Machinery and system, Barcelona, Spain, June28-30.

      [3] Avadesh K. Sharma (2012),†Design Analysis of Pressure Vessels at high stress zones using Pro/E v4.0â€.

      [4] Clough R.W. (1960),†The Finite Element Method in Plane Stresses Analysis, "Proceeding of 2nd ASCE Conference on Electronic computation, Pittsburgh, P A, September 8-9.

      [5] Zienkiewicz O.C. and Cheung Y.K. (1965),†Finite Elements in the solution of field problems,†Engineer, Vol.220, pp.507-510.

      [6] Zoppe B., Pallone C., Maitre T.,†Flow analysis Inside a pelton turbine bucket†France vol.128 July 2006.

      [7] Barlit V. V., Krishnamachar P., Gahlot V. K.,†Hydraulic Turbine (hydraulic theory & design approach) volume-II.

      [8] Bhandari V B,’ Design of Machine Elements’, Tata McGraw-Hill Publication.

      [9] Jagdish Lal, Textbook of “Hydraulic Machine “, Metropolitan book Pvt. Ltd. Delhi.

      [10] Zienkiewicz, O.C. and Taylor, R.L. (1989). The Finite Element Method, 4th ed., McGraw Hill Book Company, Maidenhead, UK

      [11] HAP – Best Practice Catalogue – Pelton Turbine, Prepared by MESA ASSOCIATES, INC., Chattanooga, TN 37402.

  • Downloads

  • How to Cite

    Lal Pal, C., T.S. Desmukh, D., & V.K.Gahlot, D. (2018). Stress Analysis of Pelton Turbine Distributor Using UG-NX Software. International Journal of Engineering & Technology, 7(4.5), 316-319. https://doi.org/10.14419/ijet.v7i4.5.20097

    Received date: 2018-09-23

    Accepted date: 2018-09-23

    Published date: 2018-09-22