Innovative Technologies for Producing Foam Concrete Products Using Solar Energy

  • Authors

    • Lyazat Aruova
    • Nabi Dauzhanov
    • Batyrkhan Tokmyrza
    • Aizhan Utkelbaeva
    • Zolaman Shashpan
    2018-09-27
    https://doi.org/10.14419/ijet.v7i4.7.20376
  • Helio heating, hardening acceleration, plastic strength, helio cover, operational strength control.
  • An energy efficient technology and a method for the production of foam concrete products have been developed. They involve the use of solar energy in the process in order to reduce energy consumption for heat treatment, which allows to produce high-quality products with a low production cost with a daily production cycle.

    The technical and economic evaluation of the developed solar technology shows that during the hot season up to 95% of the heat energy needed to intensify the hardening of the foam concrete is provided by a renewable energy source. The annual replacement of organic fuels with solar energy, considering the winter period of the year, is up to 65%. The annual economic effect in the oil equivalent of the use of this solar technology in enterprises located in regions with favorable weather and climate conditions, with a productivity of 20 thousand m3/year is up to 85 tons.

    The use of solar technology to ensure accelerated hardening of foam concrete products makes it possible to make production highly efficient, energy-saving and environmentally friendly. It meets modern requirements for saving organic fuels and reducing harmful emissions into the atmosphere.

    The energy efficiency of a yearly solar thermal treatment consists of high heat-absorbing and heat-insulating ability of helio-coatings, helio-chambers, and controlling the expenses of the heat source. As a result, energy savings in the winter months are 15-35%, in summer - 70-100%, and the average annual energy savings are in the range from 50 to 75% depending on the class of concrete and the thickness of products.

     

     

  • References

    1. [1] Pinsker, B. A. State and problems of production and use of cellular concrete. Cellular concrete in modern construction: collection of reports of the international scientific-practical conference, National chamber «Interregional North-Western Construction Chamber». St. Petersburg, 2004. 1-5.

      [2] Namsone, E., Å ahmenko, G., & Korjakins, A. Durability Properties of High Performance Foamed Concrete. Procedia Engineering, 172. 2017 760-767.

      [3] Kumar, E. M., & Ramamurthy, K. Effect of fineness and dosage of aluminium powder on the properties of moist-cured aerated concrete. Construction and Building Materials, 95. 2015 486-496.

      [4] Gusev, B. V., Kuznetsova, Т. V. Cement and concrete - development trends. Publisher: The scientific world. 2012. 136.

      [5] Falikman, V. R., and B. V. Gusev. Structural Concrete In The Age Of Sustainable Development. Special Publication 305. 2015. 36-1.

      [6] Aruova, L. B., Dauzhanov, N. Т. Technology of using solar energy in the production of various types of concrete. Journal of Concrete Technology. №12. 2014. 31-36.

      [7] Podgornov, N. I. Heat treatment of concrete using solar energy / Moscow: publishing house ABC. 2010, 328.

      [8] Aruova, L. B., Dauzhanov, N. T. Energy and Resource Saving Technologies of Building Materials Production Using Solar Energy. MOJ Civil Engineering, Volume 3 Issue 3, 2017. 1-7.

      [9] Kearsley, E. P., and Wainwright, P. J. Ash content for optimum strength of foamed concrete. Cement and concrete research 32.2. 2002. 241-246.

      [10] Amran, Y. M., Rashid, R. S., Hejazi, F., Ali, A. A., Safiee, N. A., & Bida, S. M. Structural Performance of Precast Foamed Concrete Sandwich Panel Subjected to Axial Load. KSCE Journal of Civil Engineering, 22(4). 2018. 1179-1192.

      [11] Lyazat, A., & Nabi, D. (2014). Process Parameters of Production of Non-Autoclaved Aerated Concrete on the Basis of Complex Use of Ash and Gypsum-Containing Wastes. Mediterranean Journal of Social Sciences, 5(23). 2014. 2565.

      [12] Aruova, L. B. Manufacturing Arbolitic Building Products Using Solar Energy. Journal of Mechanical Engineering Research & Developments (JMERD) 41(2). 2018. 49-55.

      [13] Aruova, L. B. The ways for reducing greenhouse gases in cements and concretes production in the Republic of Кazakhstan. Industrial civil engineering. Moscow, №5. 2018. 81-86.

      [14] Kulikova, L. V. Basics of using renewable energy sources. Ðœoscow, 2008.

      [15] Tutorial for solar thermal treatment of concrete and reinforced concrete products with the use of translucent and heat-insulating coatings to State standard of Russia 3.09.01-85. Ðœoscow, Research Institute of Concrete and Reinforced Concrete. 2017. 14.

      [16] Hu, C., Li, H., Liu, Z., & Wang, Q. Research on properties of foamed concrete reinforced with small sized glazed hollow beads. Advances in Materials Science and Engineering, 2016.

      [17] Ramamurthy, K. Development of solid, foam concrete interlocking blocks and studies on short masonry specimens. Masonry International 2013. 15-24.

  • Downloads

  • How to Cite

    Aruova, L., Dauzhanov, N., Tokmyrza, B., Utkelbaeva, A., & Shashpan, Z. (2018). Innovative Technologies for Producing Foam Concrete Products Using Solar Energy. International Journal of Engineering & Technology, 7(4.7), 36-41. https://doi.org/10.14419/ijet.v7i4.7.20376