Investigating the Agricultural Applications of Acryl Amide based Hydrogel
-
2018-11-26 https://doi.org/10.14419/ijet.v7i4.29.21711 -
, optimization, Agricultural applications, Cross-linking agent, Sodium Polyacrylate -
Abstract
Hydrogel is classified as one of the most effective materials due to its widely used applications either in tissue or agriculture engineering. This scientific research aims to investigate the potential applications of hydrogels in the field of desert agriculture in dry places. In this research hydrogel was prepared under several conditions in order to evaluate and optimize the conditions. The research included optimizing several factors including cross-linking agent, water temperatures and pH. The potential agricultural applications of hydrogel were also investigated.
-
References
[1] Buchholz F.L. and Graham A.T., Modern Superabsorbent Polymer Technology, Wiley-VCH, New York, 1998.
[2] Brannon L. and Horland R.S., Absorbent Polymer Technology, J Controlled Release, 17 (3) (1991), PP.297-298.
[3] Hennink W.E. and Nostrum C.F. (2002) Novel Cross Linking Methods to Design Hydrogels. Advanced Drug Delivery Reviews 54 13-36.
[4] Rosiak J.M. and Yoshii F. (1999), Hydrogels and their medical applications. Nuclear Instrument and Methods in Physics Research B 151, 56-64.
[5] Dayal U., Mehta S.K., Choudhari M.S. and Jain R., Synthesis of Acrylic Superabsorbents, J MacromolSci-Rev MacromolChemPhys, C39, 507-525, 1999.
[6] Buchholz F.L. and Peppas N.A., Superabsorbent Polymers Science and Technology, ACS Symposium Series, 573, American Chemical society, Washington, DC, Ch 2, 7, 8, 9, 1994.
[7] Brannon L. and Harland R.S., Absorbent Polymer Technology, Elsevier, Amsterdam, Ch 1-4, 1990.
[8] Superabsorbent hydrogels, Website of the leading Iranian manufacturer of superabsorbent polymers; Rahab Resin Co., Ltd.; 10 September 2007.
[9] Superabsorbents, Website of the European Disposables and Nonwovens Association (EDANA); www.edana.org, available in 28 May 2008.
[10] Carpi A., Analysis and Modelling to Technology Applications, ISBN: 978-953-307-268-5.
[11] Lugao, A. B. &Malmonge, S. M. (2001) Use of Radiation in the Production of Hydrogels. Nuclear Instruments and Methods in Physics Research B 185, 37-42.
[12] 12-Yue H., Liao .L, Li. X. and Cui. Y., (2009), Study on the Swelling, Shrinking and Bending Behavior of Electric Sensitive Poly (2-acrylamido-2-methylpropane sulfonic acid) Hydrogel, P. 115-117.
[13] Radwan M. and Al-Swuasy O., (2014), Graduation Project Thesis, Chemiccal Engineering Deptment, The British University in Egypt.
[14] Jhurry. D., (1997). Food and Agricultural Research Council, Reduit, Mauritius 109, Agricultural Polymers, AMAS 1997, University of Mauritius.
[15] Ecofriend, (2010). Belgian scientist uses hydrogels to turn dirt into gardens.
[16] Sannino. A., (2008). Application of Superabsorbent Hydrogels for the Optimization of Water Resources in Agriculture. Department of Innovation Engineering, Universityof Salento, Monteroni, Italy.
[17] Elazab, H., et al., Microwave-assisted synthesis of Pd nanoparticles supported on FeO, CoO, and Ni(OH) nanoplates and catalysis application for CO oxidation. Journal of Nanoparticle Research, 2014. 16(7): p. 1-11.
[18] Elazab, H., et al., The Effect of Graphene on Catalytic Performance of Palladium Nanoparticles Decorated with FeO, CoO, and Ni (OH): Potential Efficient Catalysts Used for Suzuki Cross-Coupling. Catalysis Letters. 147(6): p. 1510-1522.
[19] Elazab, H.A., et al., The continuous synthesis of Pd supported on Fe3O4 nanoparticles: A highly effective and magnetic catalyst for CO oxidation. Green Processing and Synthesis. 6(4): p. 413-424.
[20] Elazab, H.A., M.A. Sadek, and T.T. El-Idreesy, Microwave-assisted synthesis of palladium nanoparticles supported on copper oxide in aqueous medium as an efficient catalyst for Suzuki cross-coupling reaction. Adsorption Science & Technology. p. 0263617418771777.
[21] Elazab, H.A., et al., Highly efficient and magnetically recyclable graphene-supported Pd/Fe3O4 nanoparticle catalysts for Suzuki and Heck cross-coupling reactions. Applied Catalysis A: General, 2015. 491: p. 58-69.
[22] Mankarious, R.A., et al., Bulletproof vests/shields prepared from composite material based on strong polyamide fibers and epoxy resin. Journal of Engineering and Applied Sciences. 12(10): p. 2697-2701.
[23] Mohsen, W., M.A. Sadek, and H.A. Elazab, Green synthesis of copper oxide nanoparticles in aqueous medium as a potential efficient catalyst for catalysis applications. International Journal of Applied Engineering Research. 12(24): p. 14927-14930.
[24] Radwan, M.A., et al., Mechanical characteristics for different composite materials based on commercial epoxy resins and different fillers. Journal of Engineering and Applied Sciences. 12(5): p. 1179-1185.
[25] Hany A. Elazab, “The catalytic Activity of Copper Oxide Nanoparticles towards Carbon Monoxide Oxidation Catalysis: Microwave – Assisted Synthesis Approachâ€, "Biointerface Research in Applied Chemistry", Volume 8, Issue 3, 3278 – 3281, June 2018.
[26] Hany A. Elazab, “Laser Vaporization and Controlled Condensation (LVCC) of Graphene supported Pd/Fe3O4 Nanoparticles as an Efficient Magnetic Catalysts for Suzuki Cross – Coupling.â€, "Biointerface Research in Applied Chemistry", Volume 8, Issue 3, 3314 – 3318, June 2018.
[27] Fatma Zakaria, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.
[28] Reem Nasser, M. A. Radwan, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.
[29] Mostafa Ghobashy, Mamdouh Gadallah, Tamer T. El-Idreesy, M. A. Sadek, H. A. Elazab International Journal of Engineering and Technology(UAE), 7, 2018.
[30] H. A. Elazab, M. A. Sadek, Biointerface Research in Applied Chemistry, 8, 2018.
[31] Hany A. Elazab, The Canadian Journal of Chemical Engineering, volume 96, issue 10, 2018.
-
Downloads
-
How to Cite
Radwan, M. A., Al-Sweasy, O., Sadek, M. A., & A. Elazab, H. (2018). Investigating the Agricultural Applications of Acryl Amide based Hydrogel. International Journal of Engineering & Technology, 7(4.29), 168-171. https://doi.org/10.14419/ijet.v7i4.29.21711Received date: 2018-11-26
Accepted date: 2018-11-26
Published date: 2018-11-26