Fabrication of Functionally Graded Open-cell Aluminium Foam Using Graded NaCl in Infiltration Casting

  • Authors

    • Mohd Arifhakim Azizan
    • Noor Azlina Mohd Salleh
    • Muhammad Hussain Ismail
    • Valliyappan David Natarajan
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.18.21897
  • Aluminium Foam, Functionally Graded, Infiltration Casting, Porous, NaCl

  • Abstract

    Functionally graded material (FGM) is a material that has varying composition, porosity and microstructure. Such material is created to achieve a specified function. As for this research, an Aluminium based FGM was fabricated using infiltration-casting method whereby graded NaCl act as the filter and space holder material. The NaCl grain is graded into 2, 3 and 4mm in size. The results showed that the porosity of the Functionally Graded Open Cell Aluminium Foam (FGOCAF) fabricated using infiltration process is highly dependent on the sizes of NaCl grains used. By increasing the size of NaCl grain in infiltration casting method, significantly increase the porosity of the FGOCAF. It can be concluded that the NaCl grain plays an important role to define the functionality-graded structure of the final product whereby the product will show layers of porosity inside it.

     

     

  • References

    1. [1] M. Naebe and K. Shirvanimoghaddam, "Functionally graded materials: A review of fabrication and properties," Applied Materials Today, vol. 5, pp. 223-245, 2016/12/01/ 2016.

      [2] I. E. Reimanis, "Functionally graded materials," Handbook of advanced materials, p. 465, 2004.

      [3] R. M. Mahamood, E. T. Akinlabi, M. Shukla, and S. Pityana, "Functionally graded material: an overview," 2012.

      [4] J. Banhart, "Chapter 1 - Introduction," in Metal Foams, ed Burlington: Butterworth-Heinemann, 2000, pp. 1-5.

      [5] M. F. Ashby and T. Lu, "Metal foams: a survey," Science in China Series B: Chemistry, vol. 46, pp. 521-532, 2003.

      [6] Miyoshi, T., Itoh, M., Akiyama, S., & Kitahara, A. (2000). ALPORAS aluminum foam: production process, properties, and applications. Advanced engineering materials, 2(4), 179-183.

      [7] E. M. E. Luna, F. Barari, R. Woolley, and R. Goodall, "Casting protocols for the production of open cell aluminum foams by the replication technique and the effect on porosity," Journal of visualized experiments: JoVE, 2014.

      [8] J. Banhart, "Manufacturing routes for metallic foams," Jom, vol. 52, pp. 22-27, 2000.

      [9] Razali, M., Noh, R., Abdullah, B., Muhammad Hussain, I., Ahmad, U. K., Idham, M. F., & Ramli, A. (2013). Mechanical properties of aluminium foam by conventional casting combined with NaCl space holder. In Applied Mechanics and Materials (Vol. 393, pp. 156-160). Trans Tech Publications.

      [10] Hangai, Y., Morita, T., & Utsunomiya, T. (2017). Functionally graded aluminum foam consisting of dissimilar aluminum alloys fabricated by sintering and dissolution process. Materials Science and Engineering: A, 696, 544-551.

      [11] Báez–Pimiento, S., Hernández–Rojas, M. E., & Palomar–Pardavé, M. E. (2015). Processing and characterization of open–cell aluminum foams obtained through infiltration processes. Procedia Materials Science, 9, 54-61.

  • Downloads

  • How to Cite

    Arifhakim Azizan, M., Azlina Mohd Salleh, N., Hussain Ismail, M., & David Natarajan, V. (2018). Fabrication of Functionally Graded Open-cell Aluminium Foam Using Graded NaCl in Infiltration Casting. International Journal of Engineering & Technology, 7(4.18), 171-175. https://doi.org/10.14419/ijet.v7i4.18.21897

    Received date: 2018-11-27

    Accepted date: 2018-11-27

    Published date: 2018-11-27