Welding of Dissimilar Steels via Thixowelding Processes

  • Authors

    • M. N. Mohammed
    • M. Z. Omar
    • K. S. Alhawari
    • M. A. Abdelgnei
    • Salah Al-Zubaidi
    https://doi.org/10.14419/ijet.v7i3.17.21907

  • Abstract

    In several circumstances, traditional welding processes cannot produce sound weldments especially for high grade materials. In this research, a dissimilar joint of AISI D2-AISI 304 steels was produced by using new semi-solid joining process. The achieved findings revealed the quality of dissimilar joints compared with other welding processes. During Metallographic investigation, neither oxides nor micro-cracks were observed along the interface of semi-solid joint. This study confirmed that the development of dendritic structure was avoided and high quality joint can be obtained.

  • References

    1. [1] Pleterski M, Tuˇsek J, Muhic T & Kosec L (2011), Laser Cladding of Cold-Work Tool Steel by Pulse Shaping, J. Mater. Sci. Technol. 27(8), 707-713.

      [2] Mohammed MN, Omar MZ, Salleh MS & Alhawari KS (2013), Study on Thixojoining Process using Partial Remelting Method. Journal Advances in Materials Science and Engineering 10.1155/2013/251472.

      [3] Spencer DB, Mehrabian R & Flemings MC (1972), Rheological behavior of Sn-15 Pct Pb in the crystallization range. Metallurgical and Materials Transactions 3:1925-1932.

      [4] Mohammed MN, Omar MZ, Salleh MS, Alhawari KS & Kapranos P (2013), Semi-solid metal processing techniques for nondendritic feedstock production. The Scientific World Journal doi:10.1155/2013/752175.

      [5] Alhawari KS, Omar MZ, Ghazali MJ, Salleh, MS & Mohammed MN (2017), Microstructural evolution during semisolid processing of Al–Si–Cu alloy with different Mg contents. Transactions of Nonferrous Metals Society of China Volume 27, Issue 7, Pages 1483-1497.

      [6] Mohammed MN, Omar MZ, Syarif J, Sajuri Z, Salleh MS & Alhawari KS (2013), Microstructural Evolution during DPRM Process of Semisolid Ledeburitic D2 Tool Steel. The Scientific World Journal doi:10.1155/2013/828926.

      [7] Mohammed MN, Omar MZ & Salleh MS (2014), Morphological Evolution during Partial Re-Melting of AISI D2 Cold-Work Tool Steel. Sains Malaysiana 43(8) 1213-1219.

      [8] Alhawari KS, Omar MZ, Ghazali MJ, Salleh MS & Mohammed MN (2015), Evaluation of the microstructure and dry sliding wear behaviour of thixoformed A319 aluminium alloy. Materials & Design 76 169–180.

      [9] Kiuchi M & Kopp R (2002), Mushy / Semi-Solid Metal Forming Technology - Present and Future. CIRP Annals - Manufacturing Technology 51: 653–670.

      [10] Mohammed MN, Omar MZ, Syarif J, Sajuri Z, Salleh MS & Alhawari KS (2015), Semi-Solid Joining Of D2 Cold-Work Tool Steel. Solid State Phenomena 217-218, 355-360.

      [11] Mendez PF, Rice CS & Brown SB (2002), Joining using semisolid metals. Welding Journal 81: 181−187.

      [12] Mohammed MN, Omar MZ, Sajuri Z, Salleh MS & Alhawari KS (2015), Trend and Development of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering vol. 2015, Article ID 846138, 13 pages, 2015. doi:10.1155/2015/846138

      [13] Vigraman T, Narayanasamy R & Ravindran D (2012), Microstructure and mechanical property evaluation of diffusion-bonded joints made between SAE 2205 steel and AISI 1035 steel. Materials & Design 35, 156–169.

      [14] Omar MZ, Atkinson H & Kopranos P (2007), Semi-solid metal processing - a processing method under low flow loads. Jurnal Kejuruteraan 19. pp. 137-146

      [15] Mohammed M. N., Omar M. Z., Zubaidi S., Alhawari K. S., Abdelgnei M. A., (2018), Microstructure and Mechanical Properties of Thixowelded AISI D2 Tool Steel. Metals.; 8(5):316.

  • Downloads

  • How to Cite

    Mohammed, M. N., Omar, M. Z., Alhawari, K. S., Abdelgnei, M. A., & Al-Zubaidi, S. (2018). Welding of Dissimilar Steels via Thixowelding Processes. International Journal of Engineering & Technology, 7(3.17), 215-218. https://doi.org/10.14419/ijet.v7i3.17.21907

    Received date: 2018-11-27

    Accepted date: 2018-11-27