Intelligent Speed Controller for Four Phase Switched Reluctance Motor

  • Authors

    • G. Mahalakshmi
    • D. Maladhi
    • G. Manochitra
    • T. Bhavatharini
    • T. Nandhakumar
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.19.22036
  • Switched Reluctance motor, hysteresis current controller, proportional integral controller, fuzzy logic controller, variable speed drives

  • Abstract

    This paper examines the performance of Fuzzy logic controller with conventional PI controller speed control of four phase Switched Reluctance motor. Switched Reluctance motor has acquired attentiveness in Adjustable speed drive .Because of its less manufacturing and operating cost, fault tolerant capacity ,and high efficiency ,this motor is gains considerable attention. SRM is anyway somewhat hard to control, due to its nonlinear attributes. The dynamic execution anticipated from a variable speed drive incorporates least torque swell, low consistent state blunder, diminished speed overshoot, adaptation to non-critical failure and lessened speed wavering. Rather than linearizing the plant for particular working condition and afterward outlining a direct controller, a straightforward drive framework has been created. The controlled framework incorporates an inward current loop and external speed loop. Winding current and turn on ,turn off angles are utilized as control factors.

     

     

     

  • References

    1. [1] J.A. Domínguez-Navarro, J.S. Artal-Sevil, H.A. Pascual, J.L. Bernal-Agustín(2018) ,Fuzzy-Logic strategy control for switched reluctance Machine, Thirteenth International Conference on Ecological Vehicles and Renewable Energies (EVER). European Union.

      [2] Xiu Jie, Xia Changliang(2007), An Application of Fuzzy Logic Controller for SwitchedReluctance Motor Drive†Proceedings of the 26th Chinese Control Conference July 26-31, 2007, Zhangjiajie, Hunan, China,50-53

      [3] S.Sheeba Rani, V.Gomathy and R.Geethamani, “Embedded design in synchronisation of alternator automation†in International Journal of Engineering and Technology(IJET) , Volume No.7, pp 460-463, April 2018

      [4] Ali Maleki Majid Valianpour Ashkan Mohammadi Saeed Darabi(2012) ,Hybrid PID-Like Fuzzy Logic Speed Drive of Switched Reluctance Motor, 2012 11th International Conference on Environment and Electrical Engineering,

      [5] Gaber. El -saady, El-Noby A. Ibrahim and, M. Abuelhamd(2017),Hybrid PD-Fuzzy Position Controller for Linear Switched Reluctance Motor with Online Fuzzy Logic Gain Scheduling of PD, 2017 Nineteenth International Middle East Power Systems Conference (MEPCON), Menoufia University, Egypt,830-838.

      [6] Ahmed Tahour,HAmsa Abid,Abdhel Ghani Aissiaoui ,and Mohamed Abid (2006), Acta Electrotechnica,vol47,No.3,124-131.

      [7] Shun-Chung Wan, Yi-Hua Liu, Chia-Cheng Lee(2009) , A Modified PI-Like Fuzzy Logic Controller for Switched Reluctance Motor Drive, International Journal of Engineering & Technology IJET-IJENS Vol: 10 No: 05,1366-1379

      [8] Tarık UNLU, Ali UYSALA(2017), Real-Time Fuzzy Logic Control of Switched Reluctance Motor, International Journal of Intelligent Systems and Applications in Engineering, 5(3), 135-139

      [9] M. Divandari and B. Rezaie(2016) ,Fuzzy Logic Control of Switched Reluctance Motor Drives, New Applications of Artificial Intelligence,Chapter3,IN THE open science,

      [10] Hady E. Abdel-Maksoud1, Mahmoud M. Khater1, Shaaban M. Shaaban1 Gamal M (2017) , Adaptive Fuzzy Logic PI Control for Switched Reluctance Motor Based on Inductance Model, International Journal of Intelligent Engineering and Systems, Vol.10, No.4, 41-49.

      [11] G.Mahalakshmi, Dr.C.Ganesh “A Review of Torque Ripple Control Strategies of Switched Reluctance Motorâ€, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 7 (2018) pp. 4688-4692.

  • Downloads

  • How to Cite

    Mahalakshmi, G., Maladhi, D., Manochitra, G., Bhavatharini, T., & Nandhakumar, T. (2018). Intelligent Speed Controller for Four Phase Switched Reluctance Motor. International Journal of Engineering & Technology, 7(4.19), 139-143. https://doi.org/10.14419/ijet.v7i4.19.22036

    Received date: 2018-11-28

    Accepted date: 2018-11-28

    Published date: 2018-11-27