Stress Analysis of SIC Reinforced Polyester Nano Composite Spur Gear

  • Authors

    • R. Selvam
    • S. Ravi
    • K. Balasubramanian
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.19.22077
  • Spur gear, Finite element analysis, ANSYS workbench.

  • Gears are most powerful machine element to transmit the motion between rotating shaft. It acts as a dominating transmission system from many years ago. In this study, we analyzed a spur gear machine toolfor special application  using theoretical method and Finite element analysis. Here, the bending stress on the spur gear is analyzed since these stresses induced play a vital role in gear life. The analysis presented the effect of gear material on induced bending stress. Finally results of theoretical method and Finite element analysis were determined and when compared gives a better results.

     

     

  • References

    1. [1] Faydor L. Litvin, QimingLian,and Alexander L. Kapelevich. "Asymmetric modified spur gear drives: reduction of noise, localization of contact, simulation of meshing and stress analysis." Computer Methods in Applied Mechanics and Engineering 188, no. 1 (2000): 363-390.

      [2] Andrews J.D. "A finite element analysis of bending stresses induced in external and internal involute spur gears." The Journal of Strain Analysis for Engineering Design 26, no. 3 (1991): 153-163.

      [3] Fredette,L and M. Brown. "Gear stress reduction using internal stress relief features." Transactions-American Society of Mechanical Engineers Journal of Mechanical Design 119, (1997): 518-520.

      [4] Rajaprabakaran.V and R. Ashokraj. "Spur Gear Tooth Stress Analysis And Stress Reduction." IOSR Journal of Mechanical and Civil Engineering (2013): 38-48.

      [5] Vivek Karaveer , AshishMogrekar, and T. PremanReynold Joseph "Modeling and finite element analysis of spur gear." International Journal of Current Engineering and Technology (2013): 2277-4106.

      [6] T. VeeraPratap Reddy and J. Govardhan. "Contact Pressure Analysis of Spur Gear using FEA."International Journal of Electrical Electronics Computers and Mechanical Engineering (2016):2278-2808.

      [7] Santosh S. Patil , SaravananKaruppanan, IvanaAtanasovska, and Azmi Abdul Wahab. "Contact stress analysis of helical gear pairs, including frictional coefficients." International Journal of Mechanical Sciences 85, (2014): 205-211.

      [8] P.Ravikanth Raju,V.Sreenivasulu,P.Divakara Rao and C.Udaya KiranRao "Profile Modification for Increasing the Tooth Strength in Spur Gear using CAD & CAE." International Journal of Innovations in Engineering and Technology 2, no. 1 (2013): 231-241.

      [9] Hariharan and Manoj "Spur Gear tooth stress analysis and stress reduction using stress reducing geometrical features." Phd thesis 2007.

      [10] Hebbal M. S., V. B. Math, and B. G. Sheeparamatti. "A study on reducing the root fillet stress in spur gear using internal stress relieving feature of different shapes." International Journal of Recent Trends in Engineering 1, no. 5 (2009): 163-165.

      [11] Kawalec Andrzej, Jerzy Wiktor, and DariuszCeglarek. "Comparative analysis of tooth-root strength using ISO and AGMA standards in spur and helical gears with FEM-based verification." Journal of Mechanical Design 128, no. 5 (2006): 1141-1158.

      [12] Sok ChulHwang,Jin and HwanLee “Contact Stress analysis for a pair of mating gearâ€Mathematical and Computer Modelling 57,2013:40-49.

      [13] S.Vijayarangan “Stress Analysis of composite spur gear using finite element approachâ€Computers and Structures 46,1993:869-875.

      [14] Yogesh C.Hamand and Vilas Kalmkar “Analysis of stresses and deflection of sun gear by theoretical and ANSYS methodâ€Modern Mechanical Engineering,2011:56-68.

      [15] Santosh Patil,Saravanan Karuppanan and Azmi Abdul Wahab “Contact Pressure Evaluation of a Gear Pair along the line of action using Finite Element Analysisâ€Applied Mechanics and Materials 393,2013:403-408.

      [16] Maitra G.M. (1996), ‘Hand Book of Gear Design’, Tata McGraw-Hill Publishing Company Limited, New Delhi, 2nd edition

  • Downloads

  • How to Cite

    Selvam, R., Ravi, S., & Balasubramanian, K. (2018). Stress Analysis of SIC Reinforced Polyester Nano Composite Spur Gear. International Journal of Engineering & Technology, 7(4.19), 305-308. https://doi.org/10.14419/ijet.v7i4.19.22077