The Effect of Magnetic Induction Spectroscopy Signal for Cylindrical Screw with Different Length
-
2018-11-30 https://doi.org/10.14419/ijet.v7i4.26.22130 -
magnetic induction spectroscopy, bone implant fixation, electromagnetic field, current density -
Abstract
In medical surgical procedures, screw is commonly used when it comes into internal and external fixation surgery. The size of screw, which is classified as the diameter and length of screw plays an important role to stability the bone implant fixation. Previous studies showed there is lack of investigation on screw loosening detection that brings the problem of detecting the failures of bone implant in a long bone such as femur. Detection technique of this kind of problem is important in medical technologies to ensure better healing. The purpose of this study is to investigate the received signal of electromagnetic field on the different cylinder length by employing a single channel of magnetic induction spectroscopy. This study is used to evaluate the current density distribution in the cylinder screws under the action of electromagnetic field. The diameter of cylinder screw used in this simulation study is 3mm diameter based on the medical surgery procedures and the length of cylinder focuses onto 3 different lengths (22mm, 26mm, and 30mm). The simulation of this study concludes that COMSOL Multiphysic 5.2a software with a range of frequency 1MHz to 10MHz is used. The received magnetic field and current density of each model shows that the conductivity is changed based on the geometry of the cylindrical screw.
Â
 -
References
[1] S. M. Perren, “Of Long Bone Fractures The Scientific Basis Of Biological Internal Fixation : Choosing A,†Pp. 1093–1110.
[2] T. R. Davis, J. L. Sher, a Horsman, M. Simpson, B. B. Porter, and R. G. Checketts, “Intertrochanteric femoral fractures. Mechanical failure after internal fixation.,†J. Bone Jt. Surg. [Br], vol. 72, no. 1, pp. 26–31, 1990.
[3] A. O. Ogbemudia and P. F. A. Umebese, “Implant failure in osteosynthesis of fractures of long bones,†vol. 5, no. 2, pp. 5–8, 2006.
[4] S. Kumar, D. Kumar, S. P. S. Gill, P. Singh, M. Raj, and A. Gupta, “Evaluation of Implant Failure in Long Bones Fractures – A Retrospective Study,†no. March, pp. 64–68, 2014.
[5] B. Gowry, A. B. Shahriman, and Z. Zulkarnay, “Inductive phase shift as a future cost effective diagnostic tool in breast cancer localization: A prologue study,†AIP Conf. Proc., vol. 1774, 2016.
[6] M. D. O’Toole, L. A. Marsh, J. L. Davidson, Y. M. Tan, D. W. Armitage, and A. J. Peyton, “Non-contact multi-frequency magnetic induction spectroscopy system for industrial-scale bio-impedance measurement,†Meas. Sci. Technol., vol. 26, no. 3, p. 35102, 2015.
[7] H. Scharfetter, R. Casañas, and J. Rosell, “Biological Tissue Characterization by Magnetic Induction Spectroscopy ( MIS ): Requirements and Limitations,†vol. 50, no. 7, pp. 870–880, 2003.
[8] A. Barai, S. Watson, H. Griffiths, and R. Patz, “Magnetic induction spectroscopy: non-contact measurement of the electrical conductivity spectra of biological samples,†Meas. Sci. Technol., vol. 23, no. 8, p. 085501, 2012.
[9] I. Pitropakis, H. Pfeiffer, and M. Wevers, “Crack detection in aluminium plates for aerospace applications by electromagnetic impedance spectroscopy using flat coil sensors,†Sensors Actuators, A Phys., vol. 176, pp. 57–63, 2012.
[10] M. Hafiz et al., “3D Model Simulation on Magnetic Induction Spectroscopy For Fetal Acidosis Detection Using COMSOL Multiphysics,†vol. 050003, 2016.
[11] Z. Zakaria, “Simulation of Single Channel Magnetic Induction Spectroscopy for Fetal Hypoxia Detection Jurnal Teknologi Full paper Simulation of Single Channel Magnetic Induction Spectroscopy for Fetal Hypoxia Detection,†no. November, 2015.
[12] Q. Yan, G. Jin, K. Ma, M. Qin, W. Zhuang, and J. Sun, “Magnetic inductive phase shift : a new method to differentiate hemorrhagic stroke from ischemic stroke on rabbit,†pp. 1–11, 2017.
[13] A. J. Jurimah et al., “Development of Magnetic Induction Spectroscopy System in Biomedical Application to Detect Jaundice,†vol. 050008, 2016.
-
Downloads
-
How to Cite
Amran, M., Daud, R., Zakaria, Z., M.K. Ali Hassan, M., I. Omar, M., & Mat, F. (2018). The Effect of Magnetic Induction Spectroscopy Signal for Cylindrical Screw with Different Length. International Journal of Engineering & Technology, 7(4.26), 15-19. https://doi.org/10.14419/ijet.v7i4.26.22130Received date: 2018-11-29
Accepted date: 2018-11-29
Published date: 2018-11-30