Mechanical and Physical Properties of Kelempayan (Neolamarckia Cadamba) Particleboard

  • Authors

    • Nazri W.M
    • Nur Sakinah M.T
    • Jamalu K
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.26.22169
  • Kelempayan, Modulus of elasticity, Particleboard
  • The aim of this study was to investigate the role of the particle size, board density, resin content and hot press temperature on the properties of particleboard composite. Single-layered Kelempayan (Neolamarckia cadamba) particleboards bonded with phenol formaldehyde (PF) resins were manufactured. The boards were fabricated with three different particle sizes (0.5, 1.0 and 2.0 mm), two different board densities (600 and 700 kgm-3), two different resin contents (9 and 11%) and two different hot press temperatures (155 and 165ËšC). The boards produced were evaluated for their modulus of elasticity (MOE), modulus of rupture (MOR), internal bond (IB) and thickness swelling (TS) in accordance with the Malaysia Standards. The study revealed that boards from smaller particles, higher resin contents and higher hot press temperatures gave higher MOE, MOR, IB and improved the TS. However, boards with higher densities gave higher MOE, MOR, IB and TS. Overall, the boards with the particle size of 0.5 mm, board density of 700 kgm-3, resin content of 11% and 165ËšC of hot press temperature exhibited the greatest performance and were able to fulfill the Malaysia Standard specifications for furniture grade used in dry (PF1) and humid (PF2) and also for load-bearing applications in dry (PS1).

     

     

  • References

    1. [1] Kusumah SS, Umemura K, Yoshioka K & Miyafuji H (2016), Utilization of sweet sorghum bagasse and citric acid for manufacturing of particleboard I : Effects of pre-drying treatment and citric acid content on the board properties. Industrial Crops & Products 84, 34–42.

      [2] Khanjanzadeh H, Bahmani AA, Rafighi A & Tabarsa T (2012), Utilization of bio-waste cotton ( Gossypium hirsutum L.) stalks and underutilized Paulownia (Paulownia fortunie) in wood-based composite particleboard. African Journal of Biotechnology 11, 8045–8050.

      [3] Chaowana P (2013), Bamboo: An alternative raw material for wood and wood-based composites. Journal of Materials Science Research 2, 89-102.

      [4] Karlinasari L, Hermawan D, Maddu A & Martiandi B (2012), Development of particleboard from tropical fast-growing species for acoustic panel. Journal of Tropical Forest Science 24, 64–69.

      [5] Boruszewski P, Borysiuk P, Mamiński M & Czechowska J (2016), Mat compression measurements during low-density particleboard manufacturing. BioResources 11, 6909–6919.

      [6] Taghiyari HR, Bari E, Schmidt O, Ghanbary MAT, Karimi A & Paridah MT (2014), Effects of nanowollastonite on biological resistance of particleboard made from wood chips and chicken feather against Antrodia vaillantii. International Biodeterioration & Biodegradation 90, 93-98.

      [7] Bal BC (2016), Some technological properties of laminated veneer lumber produced with fast growing Poplar. Maderas Ciencia y tecnologia 18, 413–424.

      [8] Anonymous (2010). Laran, available online: http://woodwizard.mtc.com.my:8888/report.asp?AttrID=79&ItemID=5, last visit: 11.09.2010

      [9] Ismail J, Jusoh MZ & Sahri MH (1995), Anatomical variation in planted Kelempayan (Neolamarckia cadamba, Rubiaceae). IAWA Journal 16, 277–287.

      [10] Choo KT, Gan KS & Lim SC (1999), Timber notes-light hardwoods VI (Dedali, Kedondong, Kelempayan, Kelumpang, Kembang Semangkok). Timber Technology Bulletin No. 16. Forest Research Institute Malaysia, Kepong.

      [11] Malaysian Standard (MS) 1036 (2006). Wood-based panels - Particleboards - Specification (first revision): Department of Malaysian Standard.

      [12] Malaysian Standard (MS) 1787 Part 2 (2005). Wood-based panels – Sampling and cutting of test pieces. Putrajaya: Department of Malaysian Standard.

      [13] Malaysian Standard (MS) 1787 Part 3 (2005). Wood-based panels – Determination of dimensions of test pieces. Putrajaya: Department of Malaysian Standard.

      [14] Malaysian Standard (MS) 1787 Part 10 (2005). Wood-based panels – Determination of modulus elasticity in bending and bending strength. Putrajaya: Department of Malaysian Standard.

      [15] Malaysian Standard (MS) 1787 Part 11 (2005). Wood-based panels – Determination of tensile strength perpendicular to the plane of the panel. Putrajaya: Department of Malaysian Standard.

      [16] Malaysian Standard (MS) 1787 Part 6 (2005). Wood-based panels – Determination of swelling in thickness after immersion in water: Department of Malaysian Standard.

      [17] Lauke B, Feng X-Q, Mai Y-W & Fu S-Y (2008), Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites. Composites Part B Engineering 39, 933-961.

      [18] Ahmad Fauzi O, Nurrohana A, Jamaludin K et al. (2008), Effects of particle size, resin content and board density on properties of Sesendok particleboard. Jurnal Gading 12, 1-10.

      [19] Maisarah T, Zuraida A & Hanafi I (2016), A review of natural fibers and processing operations for the production of binderless boards. BioResources 11, 5600-5617.

      [20] Atta-Obeng E, Via BK & Fasina O (2012), Effect of microcrystalline cellulose, species and particle size on mechanical and physical properties of particleboard. Wood and Fiber Science 44, 1-9.

      [21] Bufalino L, Albino VCS, Va de Sa, Correa AAR, Mendes LM & Almeida NA (2012), Particleboards made from Australian red cedar: Processing variables and evaluation of mixed species. Journal of Tropical Forest Science 24, 162-172.

      [22] Enayati AA, Eslah F & Farhid E (2013), Evaluation of particleboard properties using multivariate regression equations based on structural factors. Journal of Agricultural Science and Technology15, 1405-1413.

      [23] Enayati AA & Eslah F (2014), Modelling beech (Fagus orientalis) particleboard properties based on resin content and board density. Journal Indian Academic Wood Science 11, 45-49.

      [24] Wong ED, Zhang M, Wang Q & Kawai S (1999), Formation of the density profile and its effects on the properties of particleboard. Wood Science and Technology 33, 327-340.

      [25] Iwakiri S, Trianoski R, Da Cunha AB et al. (2014), Evaluation of the quality of particleboard panels manufactured with wood from Sequoia sempervirens and Pinus taeda. Cerne, Lavras 20, 209-216.

      [26] Nemli G & Demirel S (2007), Relationship between the density profile and the technological properties of the particleboard composite. Journal of Composite Material 41, 1793-1802.

      [27] Sekaluvu L, Tumutegyereize P & Kiggundu N (2014), Investigations of factors affecting the production and properties of maize cob-particleboards. Waste Biomass Valor 5, 27-32.

      [28] Zheng Y, Pan Z, Zhang R, Jenkins BM & Blunks S (2006), Properties of medium density particleboards from saline athel wood. Industrial Crops and Products 23, 318-326.

      [29] Zhang J, Li J & Zhang S (2011), Properties of particleboard manufactured with modified urea-formaldehyde resin. Advanced Materials Research 150-151, 1135-1138.

      [30] Rachtanapun P, Sattayarak P & Ketsamak N (2012), Correlation of density and properties of particleboard from coffee waste with urea-formaldehyde and polymeric methylene diphenyl diisocyanates. Journal of Composite Materials 46, 1839-1850.

      [31] Iswanto AH, Febrianto F, Hadi YS, Ruhendi S & Hermawan D (2013), The effect of pressing temperature and time on the quality of particleboard made from jatropha fruit hulls treated in acidic condition. Makara Seri Teknologi 17, 145-151.

      [32] Zhao Z & Umemura K (2015), Investigation of a new natural particleboard adhesive composed of tannin and sucrose. 2. Effect of pressing temperature and time on board properties, and characterization of adhesive. BioResources 10, 2444-2460.

      [33] Yang F, Fei B, Wu Z, Peng L & Yu Y (2014), Selected properties of corrugated particleboards made from bamboo waste (Phyllostachys edulis) laminated with medium-density fiberboards panels. BioResources 9, 1085-1096.

  • Downloads

  • How to Cite

    W.M, N., Sakinah M.T, N., & K, J. (2018). Mechanical and Physical Properties of Kelempayan (Neolamarckia Cadamba) Particleboard. International Journal of Engineering & Technology, 7(4.26), 209-214. https://doi.org/10.14419/ijet.v7i4.26.22169