A Review on Indoor Air Quality Monitoring using IoT at Campus Environment

  • Authors

    • Anindya Ananda Hapsari
    • Asif Iqbal Hajamydeen
    • Muhammad I Irsyad Abdullah
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.22.22190
  • Air Pollution, Indoor Air Quality (IAQ), Internet of Things (IoT), Monitoring System, Systematic Review.

  • Abstract

    Indoor Air Quality (IAQ) systems provide a feasible way to maintain a healthy environment. The purpose of this study is to investigate IAQ monitoring systems, summarize existing studies, and to recommend research on IAQ monitoring that using the Internet of Things (IoT). In this systematic review the author analyzes and summarizes articles about IAQ using IoT, obtained from three databases. Based on the criteria, there were 36 studies selected that discusses IAQ, 24 are system development, six are evaluation and comparative articles, three studies proposes methods, and the other three are review articles. From the articles, there are only six researchers have conducted research on campus environment. The relevant past research was reviewed and provided discussion material on monitoring systems, sensors, devices used, and Internet of Things for Indoor Air Quality.

     

     

  • References

    1. [1] N. Marchetti, A. Cavazzini, L. Pasti, and M. Catani, “A Campus Sustainability Initiative : Indoor Air Quality Monitoring in Classrooms,†pp. 1–4, 2015.

      [2] B. H. Sudantha and P. M. Karunaratne, “IoT Enabled Proactive Indoor Air Quality Monitoring System for Sustainable Health Management,†pp. 216–221, 2017.

      [3] E. Diaz, L. Patino, and J. A. Siegel, “Indoor environmental quality in social housing: A literature review,†Build. Environ., 2018.

      [4] World Health Organization, WHO guidelines for indoor air quality: selected pollutants. 2010.

      [5] KESMAS, “Pedoman WHO Untuk Kontrol Kualitas Udara dalam Ruangan, terkait Kelembaban dan Jamur,†2016. [Online]. Available: http://www.indonesian-publichealth.com/pedoman-who-kualitas-udara-dalam-ruangan/. [Accessed: 27-Feb-2018].

      [6] S. C. Hughes et al., “Randomized Trial to Reduce Air Particle Levels in Homes of Smokers and Children,†Am. J. Prev. Med., vol. 54, no. 3, pp. 359–367, 2018.

      [7] United States Environmental Protection Agency, “Introduction of Indoor Air Quality Indoor Air Pollution and Health,†2017. [Online]. Available: https://www.epa.gov/indoor-air-quality-iaq/introduction-indoor-air-quality. [Accessed: 01-Mar-2018].

      [8] A. Martín-garín, J. A. Millán-garcía, A. Baïri, J. Millán-model, and J. M. Sala-lizarraga, “Environmental monitoring system based on an Open Source Platform and the Internet of Things for a building energy retro fi t,†Autom. Constr., vol. 87, no. March 2017, pp. 201–214, 2018.

      [9] PRISMA, “PRISMA Statement,†2015. [Online]. Available: http://www.prisma-statement.org/PRISMAStatement/. [Accessed: 28-Mar-2018].

      [10] D. Moher et al., “Preferred reporting items for systematic review and meta-analysis protocols ( PRISMA-P ) 2015 statement,†pp. 1–9, 2015.

      [11] A. Andrade, “Indoor air quality of environments used for physical exercise and sports practice : Systematic review,†vol. 206, 2018.

      [12] N. Madrid and R. Boulton, “Remote monitoring of winery and creamery environments with a wireless sensor system,†vol. 119, pp. 128–139, 2017.

      [13] S. Kim, “Investigating Everyday Information Behavior of Using Ambient Displays : A Case of Indoor Air Quality Monitors,†pp. 249–252, 2018.

      [14] [14] M. Ljubojevic and M. Zoric, “Quality of Life Context Influence Factors Improvement Using Houseplants and Internet of Things,†2016.

      [15] Y. Geun et al., “Downsizing gas sensors based on semiconducting metal oxide : Effects of electrodes on gas sensing properties,†Sensors Actuators B. Chem., vol. 248, pp. 949–956, 2017.

      [16] L. Belussi et al., “How to control the Indoor Environmental Quality through the use of the Do-It-Yourself approach and new pervasive technologies,†Energy Procedia, vol. 140, pp. 351–360, 2017.

      [17] T. Hong, M. Lee, and J. Kim, “Analysis of energy consumption and indoor temperature distributions in educational facility based on CFD-BES model,†Energy Procedia, vol. 105, pp. 3705–3710, 2017.

      [18] A. L. C. Ciribini et al., “Tracking users ’ behaviors through real-time information in BIMs : Workflow for interconnection in the Brescia Smart Campus Demonstrator,†Procedia Eng., vol. 180, pp. 1484–1494, 2017.

      [19] U. Scale et al., “Examining Architectural Air and Temperature with Novel Sensing Techniques,†Energy Procedia, vol. 122, pp. 1135–1140, 2017.

      [20] C. Yang, S. Chen, W. Den, and Y. Wang, “Implementation of an Intelligent Indoor Environmental Monitoring and management system in cloud,†Futur. Gener. Comput. Syst., 2018.

      [21] D. Lohani and D. Acharya, “SmartVent: A Context-Aware IoT System to Measure Indoor Air Quality and Ventilation Rate,†2016.

      [22] A. Szczurek, M. Maciejewska, and T. Pietrucha, “Occupancy determination based on time series of CO 2 concentration, temperature, and relative humidity,†Energy Build., vol. 147, pp. 142–154, 2017.

      [23] S. Rinaldi, F. Bittenbinder, C. Liu, P. Bellagente, L. C. Tagliabue, and A. L. C. Ciribini, “Bi-Directional Interactions between Users and Cognitive Buildings by means of Smartphone App,†vol. 40545387, no. 40545387, 2016.

      [24] TSI, Indoor Air Quality Handbook. 2013.

      [25] J. Molka-danielsen, P. Engelseth, and H. Wang, “Large-scale integration of wireless sensor network technologies for air quality monitoring at a logistics shipping base,†J. Ind. Inf. Integr., no. November 2017, pp. 0–1, 2018.

      [26] M. Waseem, M. Mourshed, D. Mundow, and M. Sisinni, “Building energy metering and environmental monitoring – A state-of-the-art review and directions for future research,†Energy Build., vol. 120, pp. 85–102, 2016.

      [27] J. Choi, J. S. Park, S. Chang, and H. R. Lee, “Multi-purpose Connected Electronic Nose System for Health Screening and Indoor Air Quality Monitoring,†pp. 495–499, 2017.

      [28] J. Pantelic et al., “Comparing the indoor environmental quality of a displacement ventilation and passive chilled beam application to conventional air-conditioning in the Tropics,†Build. Environ., vol. 130, no. November 2017, pp. 128–142, 2018.

      [29] B. Merikhi, “SC-IAQM Model for Indoor Air Quality Monitoring in a Smart Community,†pp. 1562–1567, 2016.

      [30] M. Choi et al., “Design and Implementation of IoT-Based HVAC System for Future Zero Energy Building,†no. 20154030200860, 2017.

      [31] G. A. M. Nastasi, A. Scuderi, H. Endres, W. Hell, and K. Bock, “Simple cost-effective and network compatible readout for capacitive and resistive ( chemical ) sensors,†Procedia Eng., vol. 87, pp. 1234–1238, 2014.

      [32] M. G. M. Johar and J. A. A. Awalluddin, “The role of technology acceptance model in explaining effect on e-commerce application system,†Int. J. Manag. Inf. Technol., vol. 3, no. 3, 2011.

      [33] J. Shah and B. Mishra, “Customized IoT enabled Wireless Sensing and Monitoring Platform for Smart Buildings,†vol. 23, pp. 256–263, 2016.

      [34] Y. N. Malek, A. Kharbouch, H. El Khoukhi, M. Bakhouya, and V. De Florio, “On the use of IoT and Big Data Technologies for Real-time Monitoring and Data Processing,†Procedia Comput. Sci., vol. 113, pp. 429–434, 2017.

      [35] Y. Jeon et al., “IoT-based occupancy detection system in indoor residential environments,†Build. Environ., vol. 132, no. November 2017, pp. 181–204, 2018.

      [36] [36] P. P. Ray, “Internet of Things cloud-enabled MISSENARD index measurement for indoor occupants,†Measurement, vol. 92, pp. 157–165, 2016.

      [37] [37] X. Yang, L. Yang, and J. Zhang, “A WiFi-enabled Indoor Air Quality Monitoring and Control System : the Design and Control Experiments,†pp. 3–8, 2017.

      [38] P. Spachos, “Demo Abstract : Indoor Air Quality Monitoring using a Virtual Customer Premise Edge,†pp. 125–126, 2016.

      [39] B. Fang, Q. Xu, T. Park, and M. Zhang, “AirSense : An Intelligent Home-based Sensing System for Indoor Air Quality Analytics,†pp. 109–119, 2016.

      [40] L. Zimmermann, S. Member, R. Weigel, and G. Fischer, “Fusion of Non-Intrusive Environmental Sensors for Occupancy Detection in Smart Homes,†vol. 4662, no. c, pp. 1–10, 2017.

      [41] J. He, L. Xu, P. Wang, and Q. Wang, “A high precise E-nose for daily indoor air quality monitoring in living environment,†Integr. VLSI J., vol. 58, no. December 2016, pp. 286–294, 2017.

      [42] H. Wang, C. Hsu, T. Jian, and A. Chen, “On the Design and Implementation of an Innovative Smart Building Platform,†2016.

      [43] T. Järvinen, G. Simone, and A. Rautio, “Portable cyber-physical system for indoor and outdoor gas sensing,†Sensors Actuators B. Chem., vol. 252, pp. 983–990, 2017.

      [44] R. G. Southall, “An assessment of the potential of supply-side ventilation demand control to regulate natural ventilation flow patterns and reduce domestic space heating consumption,†Energy Build., vol. 168, pp. 201–214, 2018.

      [45] P. Kumar et al., “Indoor air quality and energy management through real-time sensing in commercial buildings,†Energy Build., vol. 111, pp. 145–153, 2016

  • Downloads

  • How to Cite

    Ananda Hapsari, A., Iqbal Hajamydeen, A., & Irsyad Abdullah, M. I. (2018). A Review on Indoor Air Quality Monitoring using IoT at Campus Environment. International Journal of Engineering & Technology, 7(4.22), 55-60. https://doi.org/10.14419/ijet.v7i4.22.22190

    Received date: 2018-11-29

    Accepted date: 2018-11-29

    Published date: 2018-11-30