Properties of Polymer Addition Ratio for Efflorescence Reduction in Permeable Blocks

  • Authors

    • Sang-Soo Lee
    • Byeong-Yong Yoo
    • Won-Gyu Lee
    https://doi.org/10.14419/ijet.v7i3.24.22828
  • Permeable Block, Efflorescence, Permeability coefficient, Polymer, Industrial by products
  • Background/Objectives: In Korea, rapid industrial development has changed the flow of rainwater, and flooding of rivers and depletion of groundwater have become problems.

    Methods/Statistical analysis: The permeable block was manufactured, and the existing permeable block has the disadvantage of efflorescence. The efflorescence affects not only strength but also product life. In order to prevent the efflorescence, the use of cement, which is the main cause of the efflorescence, was reduced and fly ash as an alternative to cement was used as an industrial byproduct. Polymers were used to increase strength and durability.

    Findings: The test items were density, water absorption, flexural strength, compressive strength, porosity, permeability coefficient, and efflorescence state.

      Density and water absorption decrease as the polymer addition rate increases. The flexural strength and compressive strength increase as the addition rate of polymer increases. Porosity and permeability coefficient decrease as the addition rate of polymer increases but satisfy the KS standard. When the amount of efflorescence was observed, it was confirmed that the amount of efflorescence decreased as the addition rate of polymer increased.

    Improvements/Applications: Future experiments predict that non-cemented permeable blocks will be produced and will not produce efflorescence completely.

     

     

  • References

    1. [1] Jun, S.M., Park, J.H., Kim, Y.D., (2012). Quantitative Analysis of the Permeability of Water Permeable block. The 38th KOREAN SOCIETY OF CIVIL ENGINEERS. 224-227. Retrieved from http://www.dbpia.co.kr/Article/NODE02300291

      [2] Park, D.G., Jung, W.K., Jeong, D.W (2016). Evaluation of Field Permeability and Material Characteristics of Permeable Block for Roadway Pavement. Ecology and Resilient Infrastructure. 3(2): 110-116 Retrieved from http://dx.doi.org/10.17820/eri.2016.3.2.110

      [3] Yoo, B.Y., (2018). Performance Evaluation of Polymer Block using Artificial Permeable Pipe (Masters dissertation). HanBat National University. Korea.

      [4] Lee, Y.S., Joo, M.K., Yeon, K.S., (2001). Development of Water-Permeable Polymer Concrete for Pavement. Korea Concrete Institute 147-152. Retrieved from http://www.dbpia.co.kr/Article/NODE02305104

      [5] Choi J.J., Choi, D.S. (2007). Influence of the Types and Grading of Aggregate on the Properties of Porous Concrete. JOURNAL OF THE KOREAN SOCIETY OF CIVIL ENGINEERS A 27(3A), 393-400. Retrieved from http://www.dbpia.co.kr/Article/NODE01225550

      [6] Ban, S.S., (2000). An experimental study on the permeability and engineering properties of porous concrete (Masters dissertation). ChunNam National University. Korea.

      [7] Yoo, S.A. (2009). A study on the development of the environment-friendly paving block : focused on low-toxicity paving materials development (Masters dissertation). HanYang University. Korea

      [8] Kim, B.G., (2017). Performance evaluation of eco-concrete block using non-cemented inorganic binder (Masters dissertation). ChonBuk National University. Korea.

      [9] Jung, Y.W., Jang, S.S., Choi, J.O., (2014). A Study on the Properties of Exhaust-gas Purge and Efflorescence of Concrete sidewalk block. Korea Concrete Institute. 333-334. Retrieved from http://www.dbpia.co.kr/Journal/ArticleDetail/NODE06073082

      [10] Jung, J.E., Kim, D.H., Kim, j. W., Jeong, Y. (2015). A Fundamental Study for Development of Grout Mortar for Efflorescence Reduction. Korea Concrete Institute. 453-454.Retrieved from http://www.dbpia.co.kr/Journal/ArticleDetail/NODE06569713

      [11] Kim, J.H., (2001). An Experimental study on influence factors for the strength and water permeability of porous concrete (Masters dissertation). ChunNam National University. Korea.

      [12] Korea Concrete Institute, (2013). Production and Construction of Polymer Concrete Composites. Kimoondang, Korea.

  • Downloads

  • How to Cite

    Lee, S.-S., Yoo, B.-Y., & Lee, W.-G. (2018). Properties of Polymer Addition Ratio for Efflorescence Reduction in Permeable Blocks. International Journal of Engineering & Technology, 7(3.24), 623-626. https://doi.org/10.14419/ijet.v7i3.24.22828