Fuzzy with PID based Sensorless Brushless DC Motor Control

  • Authors

    • S. Bagavathy
    • P. Maruthupandi
    • S. Sheebarani
    • Radhika .
    • Ramya Rani N
    2018-11-27
    https://doi.org/10.14419/ijet.v7i4.19.23205
  • BLDC Motor, PID Controller, Fuzzy.

  • Abstract

    In this Work, the controller with fuzzy and PID used to execute the speed calculation of a brushless dc motor. The proposed strategy is basic and solid. Amid regenerative braking mode, it saves energy in a rechargeable battery. The proposed controller is coordinated utilizing the fuzzy logic toolbox in MATLAB. The work proposes the idea of fuzzy with PID controller for controlling the speed of BLDC motor. The goals of the undertaking are to analyze the execution of PI and the proposed fuzzy with PID controllers utilizing MATLAB software for the controlling the speed of BLDC motor. The executions of the two controllers are compared based on different control framework time domain parameters. Simulation consequences of the two controllers have been exhibited and it is discovered that the control idea with fuzzy with  PID controller outflanks customary controller in a large portion of the angles.

     

     

  • References

    1. [1] Abdullah JH Al Gizi , Mustafa, MW & Hamid H Jebur 2014, A novel design of high-sensitive fuzzy with PID controller, Applied Soft Computing, Vol.24, no., pp.794-805.

      [2] Alizadeh Pahlavani , MR & Barakat, M 2011, Comparison between Fuzzy and Adaptive Fuzzy Controllers for Speed Control of BLDC Motors : proceeding of the twenty sixth international power system conference , pp.1-8.

      [3] S.Sheeba Rani, V.Gomathy and R.Geethamani, “Embedded design in synchronistaion of alternator automation†in International Journal of Engineering and Technology(IJET) , Volume No.7, 2018, pp 460-463, April 2018

      [4] Anand Sathyan, Mahesh Krishnamurthy, Nikola Milivojevic and Ali Emadi, “A Low-Cost Digital Control Scheme for Brushless DC Motor Drives in Domestic Applicationsâ€, Proc. of International Electric Machines and Drives Conference, Florida, pp.76–82, 2009.

      [5] Angel Marinov and Vencislav Valchev, “Efficiency enhancement of four-quadrant PMDC motor control through combination of power electronics switchesâ€, Proc. of 14th IEEE International Power Electronics and Motion Control Conference, Ohrid, pp.61-65, 2010.

      [6] Arvindan, A.N. “Power Quality based Performance Analysis of a Dual Buck Converter Fed Four-Quadrant DC Driveâ€, Proc. Of International Conference on Power Electronics (IICPE), India, pp.1-8, 2011.

      [7] Arulmozhiyal, R & Kandiban, R 2012, Design of Fuzzy with PID controller for Brushless DC motor : Proceedings of the international conference on computer communication and informatics , pp.1-7.

      [8] Bharatkar, SS , Yanamshetti, R , Chatterjee, D & Ganguli, AK 2011, Dualmode switching technique for reduction of commutation torque ripple of brushless dc motor, IET Electric Power Applications, Vol.5, no.1, pp.193–202.

      [9] Binod Kumar Sahu , Swagat Pati , Pradeep Kumar Mohanty & Sidhartha Panda 2015, Teaching–learning based optimization algorithm based fuzzy-PID controller for automatic generation control of multi-area power system, Applied Soft Computing, Vol.27, no., pp.240-249.

      [10] Cheng-Tsung Lin, Chung-Wen Hung, and Chih-Wen Liu, “Position Sensorless Control for Four-Switch Three-Phase Brushless DC Motor Drivesâ€, IEEE Transactions on Power Electronics, Vol. 23, No. 1, pp.438-444, 2008.

      [11] Chen Yongjun, Huang Shenghua, Wan Shanming and Fang WU, “Dynamic Equations Algorithm of the Sensorless BLDC Motor Drive Control With Back-EMF Filtering Based on dsPIC30F2010â€, Proc. Of Chinese Control Conference, China, pp.3626 -3630, 2011.

  • Downloads

  • How to Cite

    Bagavathy, S., Maruthupandi, P., Sheebarani, S., ., R., & Rani N, R. (2018). Fuzzy with PID based Sensorless Brushless DC Motor Control. International Journal of Engineering & Technology, 7(4.19), 481-484. https://doi.org/10.14419/ijet.v7i4.19.23205

    Received date: 2018-12-05

    Accepted date: 2018-12-05

    Published date: 2018-11-27