Vibration effect on the corrosion rate of crude oil pipeline

  • Authors

    • Haider Hadi Jasim Bsrah university
    2019-06-30
    https://doi.org/10.14419/ijet.v7i4.23218
  • Chloride Salts, Trace Element, Vibration, Asphalt, CO2 and H2S Gases.

  • Abstract

    In this paper, evaluation the influence of vibration on the corrosion rate of API 5L X60 and API 5L X80 carbon steel pipelines used for delivering of crude oils. A grouped of equipment are constructed laboratory and then used in the vibration-immersion corrosion test. The experimental results demonstrated that the vibration effects on crude oil properties and contribute to the dissociation of components of crude oils essentially water, dissolved gases and asphalt which leads to increase the corrosion rates compared to static case. The vibration process effect on the material compositions, i.e., the vibration effect on bonds between atoms of metal which leads to reduces of resistances of material to corrosion process.

     


  • References

    1. [1] Atila E., ‘Engineering mechanics and design applications: Trans. disciplinary engineering application’, Chapter 6, CRC Press Taylor and Francis Group, USA, 2012.

      [2] Peter V. and Leonid F., ‘Analytical study of piping flow-induced vibration, example of implementation’, Transactions of the 17th Int. Conference on Structural Mechanics in Reactor Technology (SMiRT 17) Prague, Czech Republic, August 17–22, 2003. https://www.cvs.spb.su/PAPERS/Flow-inducedVibration.pdf.

      [3] Shigehiko K., Tomomichi N., Fumio I., Minoru K., Kunihiko I., Takashi N., Njuki W. M., and Mikael A. L., ‘Flow-induced vibrations: classifications and lessons from practical experiences’, Chapter 4, Second Edition, Publishers by Elsevier B. V., Amsterdam, 2014.

      [4] Cao H. Z., ‘Crude oil storage tank floor corrosion mechanism and protective measures’, M.Sc. Thesis, Zhejiang University of Technology, China, 2002.

      [5] Subrata K. C., ‘The theory and practice of hydrodynamics and vibration’, Advance Serous in Ocean Engineering, Vol.20, Publisher World Scientific Publishing Company (1773), USA, 2002.

      [6] Rongguang W., ‘Influence of ultrasound on pitting corrosion and crevice corrosion of SUS304 stainless steel in chloride sodium aqueous solution’, Corrosion Science, 50, 2, (2008) 325-328. https://doi.org/10.1016/j.corsci.2007.11.001.

      [7] Yakupov N. M. and Yakupov S. N., ‘Corrosion wear under vibrations’, Doklady Physics, 63, 4, (2017) 147-149. https://link.springer.com/article/10.1134/S1028335818040109. https://doi.org/10.1134/S1028335818040109.

      [8] James D. Hart, Richard S., G. W. Ford and Dennls G. Row, ‘Mitigation of wind induced vibration of arctic pipelines systems’, Proceedings of the 11th International Conference on Offshore Mechanics and Arctic Engineering (OMAE92), Vol.2, ASME, New York, (1992) 169-180. http://ssdinc.com/documents/WIV_OMAE92.pdf

      [9] Habib A., Hyeonbae K., Eunjoo K., Hyundae L. and Kaouthar L., ‘Vibration testing for detecting internal corrosion’, Studies In Applied Mathematics, 122, 1, (2006) 85-104. http://www.cmap.polytechnique.fr/~ammari/papers/vibration-final.pdf. https://doi.org/10.1111/j.1467-9590.2008.00424.x.

      [10] Fei X., ‘A study of vibration induced fretting corrosion for electrical connector’, Ph.D. Thesis, Auburn University, Alabama, USA, 2007.

      [11] Safri S., Abdul Wahab A. and Andreas P., UT-ILI and fitness for purpose analysis for severely internally corroded crude oil pipeline, 8th Pipeline Technology Conference 2013, Hannover Congress Centrum, Hannover, Germany, 2013. http://www.pipeline-journal.ru/pdf/eng/ptj-2013/PTJ_2-2013.pdf.

      [12] Kong K. K., Khoo S.Y., Ong Z.C., Eng C., Ismail Z., Chong T., Noroozi S. and Rahman A., Failure analysis of flow-induced vibration problem of in-serviced duplex stainless steel piping system in oil and gas industry, Materials Research Innovations, 18 (2014) 417-422 https://www.tandfonline.com/doi/abs/10.1179/1432891714Z.000000000990. https://doi.org/10.1179/1432891714Z.000000000990.

      [13] Eslami M. A. and Ahmad R. R., ‘Free vibration analysis of corroded steel plates’, Journal of Mechanical Science and Technology, 28, 6, (2014) 2081-2088. https://link.springer.com/article/10.1007/s12206-013-1114-7. https://doi.org/10.1007/s12206-013-1114-7.

      [14] Wael H. A., Atef M. M. and Yehia A. K., ‘An Innovative vibration sensor for flow accelerated corrosion measurement’, Innovations in Corrosion and Materials Science, 2, 1, (2015) 61-65. http://www.eurekaselect.com/97694/article. https://doi.org/10.2174/1877610811202010061.

      [15] [15] Yang Z. and Erkan O., ‘Corrosion detection in pipelines based on measurement of natural frequencies’, Annals of Limnology and Oceanography, 2, 1, (2017) 1-6. https://www.peertechz.com/articles/ALO-2-104.php.

      [16] Lu H., Xiaonan W. and Kun H., Study on the effect of reciprocating pump pipeline system vibration on oil transportation stations, Energies, 11, 132, (2018) 1-23. https://www.mdpi.com/1996-1073/11/1/132. https://doi.org/10.3390/en11010132.

      [17] Saad Z. Jassim and Jeremy C. G., ‘Geology of Iraq’, Polisher Geological Society of London, UK, 2006.

      [18] Igor R. V. P. and Renato S. D. C., ‘Study of phase transformations in API 5l X80 steel in order to increase its fracture toughness’, Materials Research, 16, 2, (2013) 489-496. http://www.scielo.br/scielo.php?script=sci_arttext&pid=S1516-14392013000200026. https://doi.org/10.1590/S1516-14392013005000024.

      [19] John E. B., ‘Handbook of comparative world steel standard’, Third Edition, ASTM Data Series DS67A, USA, 2002.

      [20] ASTM G32-03, ‘Standard test method for cavitation erosion using vibratory apparatus’, Report of ASTM International, USA, 2003.

      [21] Mayer V. A., ‘Material test methods and analytical procedures’, Annual Book of ASTM Standards, Section 3, (2010) 94 -109.

      [22] Singh D. D. N., Kumar A. and Fresh A., ‘Look at ASTM G 1-90 solution recommended for cleaning of corrosion products formed on iron and steels’, Corrosion 2003, 59, 11, (2003) 1029-1036. https://corrosionjournal.org/doi/10.5006/1.3277521. https://doi.org/10.5006/1.3277521.

      [23] ASTM G1-90, ‘Standard practice for preparing, cleaning, and evaluating corrosion test specimens’, ASTM Handbook 3.02 Corrosion of Metals, Wear and Erosion, West, PA, USA, (1999) 20-28.

      [24] Roland T. Loto, ‘Study of the corrosion behaviour of S32101 duplex and 410 martensitic stainless steel for application in oil refinery distillation systems’, Journal of Materials Research and Technology, 6, 3, (2017) 203-212. https://www.sciencedirect.com/science/article/pii/S2238785416301028. https://doi.org/10.1016/j.jmrt.2016.11.001.

  • Downloads

    Additional Files

  • How to Cite

    Hadi Jasim, H. (2019). Vibration effect on the corrosion rate of crude oil pipeline. International Journal of Engineering & Technology, 7(4), 6447-6452. https://doi.org/10.14419/ijet.v7i4.23218

    Received date: 2018-12-05

    Accepted date: 2019-06-01

    Published date: 2019-06-30