Improvement Branch Line Coupler Isolation in S Band Frequency

  • Authors

    • Yudi Barnadi
    • Yanyan Agustian
    • Fuad Hasan
    2018-12-09
    https://doi.org/10.14419/ijet.v7i4.33.23563
  • Radar, S-Band, Coupler and Isolation value.
  • In this paper, the research was conducted to investigate the effects of optimization dimension to the isolation value of the Branch line coupler. The isolation is very important because it affects to the performance of the duplexer. The smaller value the better isolation performance of the duplexer. This research is carried out by modifying the length and width of the channels of the impedance of the Coupler. In this experiment, Branch-Line coupler is designed in the form of microstrip and fabricated using the FR-4 substrate that has a dielectric constant of 4.6, thickness of 1.3 mm, and 3 GHz operating frequency. To get the optimization value of the isolation characteristic, impedance channel must be modified, which are the length and width of the arms series (Z0 = 50 Ω), the length and width of the arms series (Z0 = 35.35 Ω), and the length and width of the arms shunt (Z0 = 50 Ω). The optimized result of the isolation is -67,786 B

  • References

    1. [1] Wirth, W. D. (2001). Radar techniques using array antennas. IET.

      [2] Skolnik, M. I. (1990). Radar handbook. McGraw-Hill.

      [3] Ahn, B. J., Kim, S. K., & Yook, J. O. (2005). Isolation-improved branch-line coupler based on feed-forward technique. Proceedings of the IEEE Asia-Pacific Conference on Microwave, pp. 4-pp.

      [4] Moradianpour, M., & Khalaj-Amirhosseini, M. (2008). Improvement the characteristics of the microstrip parallel coupled line coupler by means of grooved substrate. Progress in Electromagnetics Research, 3, 205-215.

      [5] Moradian, M. (2015). Improving isolation of slot-coupled directional couplers. Electronics Letters, 51(12), 914-915.

      [6] Willems, D. A. (1994). A broadband MMIC quadrature coupler using a braided microstrip structure. Proceedings of the IEEE MTT-S International Microwave Symposium Digest, pp. 899-902.

      [7] Banba, S., & Ogawa, H. (1995). Multilayer MMIC directional couplers using thin dielectric layers. IEEE transactions on microwave theory and techniques, 43(6), 1270-1275.

      [8] Carchon, G., De Raedt, W., & Nauwelaers, B. (2001). Integration of CPW quadrature couplers in multilayer thin-film MCM-D. IEEE Transactions on Microwave Theory and Techniques, 49(10), 1770-1776.

      [9] Willems, D. A. (1994). A broadband MMIC quadrature coupler using a braided microstrip structure. Proceedings of the IEEE MTT-S International Microwave Symposium Digest, pp. 899-902.

      [10] Hong, J. S. G., & Lancaster, M. J. (2004). Microstrip filters for RF/microwave applications. John Wiley and Sons.

      [11] Mayer, L. W., & Scholtz, A. L. (2009). Circularly polarized patch antenna with high Tx/Rx-separation. Proceedings of the IEEE International Conference on pp. 213-216.

      [12] Riyanti, I. (2010). Perancangan Microstrip Branch Line Coupler dengan T-Junction untuk Mobile WiMAX pada Frekuensi 2, 3 GHz. Skripsi S1, Universitas Indonesia.

      [13] Moradian, M. (2015). Improving isolation of slot-coupled directional couplers. Electronics Letters, 51(12), 914-915.

  • Downloads

  • How to Cite

    Barnadi, Y., Agustian, Y., & Hasan, F. (2018). Improvement Branch Line Coupler Isolation in S Band Frequency. International Journal of Engineering & Technology, 7(4.33), 219-222. https://doi.org/10.14419/ijet.v7i4.33.23563