Corrosion of Platinum Nanocoatings Thin Films Deposited by Sputtering Deposition Method for Medical Applications

  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract

    Platinum (Pt.) thin films have been deposited by Magnetron Sputtering Deposition method with 25 nm and 50 nm thickness by used power RF for deposited 5 nm Titanium (Ti) firstly then used DC for deposited Platinum (Pt) on Ni-Cr alloy substrate. SEM/EDX and Ellipsometry Spectroscopy have been used to investigate the morphology, element analysis, nanothickness and roughness of the thin films respectively. Electrochemical corrosion tests have been used to analyze the localized corrosion resistance by used cyclic polarization, Tafel extrapolation and open circuit potential (o.c.p) methods on artificial saliva solution at 37  ±1 oC. The results show the ability to deposit 5 nm of Ti before deposited of Pt. film to improve the adhesive of the films, nanostructure morphology of the Pt. film without defect or microcracks, nanocoatings thickness of Pt. film, and high localized corrosion resistance in artificial saliva corrosive media.



  • Keywords

    Atomic absorption spectroscopy, Corrosion Resistance, Platinum, Sputtering Deposition, Artificial Saliva, Titanium, Thin Films

  • References

      [1] Aliofkhazraei Mahmood (2011), “Nanocoatings; Size Effect in Nanostructured Films”, Springer, New York.

      [2] David Joseph Gennardo (2010), "Design, Construction, and Optimization of A magnetron Sputtering System For Urania Deposition" , Master of Science in Nuclear Engineering in the Graduate College of the University of Illinois at Urbana-Champaign.

      [3] Davis J. R. (2000), “ASM Specialty Handbook : Nickel, Cobalt, and Their Alloys”, 9th edition ASM International, Vol.9.

      [4] Haitham M. Wadullah, Muna Khethier Abbass, and Sami Abualnoun Ajeel (2016), "Nanococoatings by atomic layer deposition for medical applications", Scholars press, Germany.

      [5] Hendra Hermawan, Dadan R. and Joy R. P. D. (2011) , “Metals for Biomedical Applications”, Biomedical Engineering and Health Science, University of Technology, Malaysia.

      [6] Injeti G., and Leo B. (2008), “Electrodeposition of nanostructured coatings and their characterization”, J. of Science and Technology of Advanced materials, 9, pp. 121-129.

      [7] Joanna Mystkowska 1,* ID, Katarzyna Niemirowicz-Laskowska (2018), "The Role of Oral Cavity Biofilm on Metallic Biomaterial Surface Destruction Corrosion and Friction Aspects", International Journal of Molecular Sciences, 19, 743; doi: 10.3390/ijms19030743, pp 8-18.

      [8] John D. Wrbanek (2005), "Preparation and Analysis of Platinum Thin Films for High Temperature Sensor Applications", Akima Corporation, Brook Park, Ohio- NASA/TM-213433.

      [9] Kamachi U. Mudali, T. M. Sridhar and Baldev Raj (2003), “Corrosion of bio implants”, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, India, Vol. 28, Parts 3 & 4, pp. 601–637.

      [10] Kiyotaka Wasa., Makoto K., and Hideaki A. (2004) , “Thin Film Materials Technology”, William Andrew, Inc. USA.

      [11] Kotoka Ruben (2013) , “Functionalized Thin Film Coatings for Medical Implant Applications”, PhD Thesis, Mechanical Engineering Dept ,North Carolina Technical State University.

      [12] Miao Yu (2014), “Microstructure, Corrosion Behavior, Mechanical Property and Biocompatibility of Compression-molded Zinc-Nano-diamond Composites as a Bio-implant Material “,PhD Thesis, Material Eng. Dept., Drexel University, USA.

      [13] Muna Khethier Abbass , Sami Abualnoun Ajeel & Haitham M. Wadullah (2018), "Biocompatibility, Bioactivity and Corrosion Resistance of Stainless Steel 316L Nanocoated with TiO2 and Al2O3 by Atomic Layer Deposition Method", The Sixth Scientific Conference “Renewable Energy and its Applications”, Journal of Physics: IOP Conf. Series 1032, 01, doi :10.1088/1742-6596/1032/1/012017, 2017

      [14] Nitech R. Patel, and Piyush P. Gohil (2012), “A Review on Biomaterials: Scope, Applications & Human Anatomy Significance”, International Journal of Emerging Technology and Advanced Engineering, Volume 2, Issue 4, pp 91-94.

      [15] Sami Abualnoun Ajeel, Muna Khethier Abbass, and Haitham M. Wadullah (2015), "Atomic Layer Deposition properties of TiO2 and Al2O3 thin films on Stainless Steel 316L and Si-Wafer", Engineering Colleges' Society in Arabic Universities Vol. 22, No. 1, pp 1-9.

      [16] Sujata K. Bhatia (2012), “Engineering Biomaterials for Regenerative Medicine”, Novel Technologies for Clinical Applications, Springer Science and Business Media, UK.

      [17] Tiginyanu Ion and Makhlouf A. S. H. (2011), “Nanocoatings and ultra-thin films Technology and Applications”, Woodhead Publishing Limited.




Article ID: 23618
DOI: 10.14419/ijet.v7i4.37.23618

Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.