Buckling of Circular Cylinder under Axial Load

  • Authors

    • Sandeep Chauhan
    • Azad Ahmad
    2018-12-13
    https://doi.org/10.14419/ijet.v7i4.39.24110
  • Buckling, Circular Cylindrical Shell, FEM analysis.

  • Abstract

    Present investigation is initiated to understand the effects of axially applied load upon the buckling behavior of thin circular cylindrical shells. In this study circular cylinder of finite length is taken as variable along with thickness of the cylinder to improve the understanding of buckling behavior. Buckling load is determined by FEM analysis carried out through ABAQUS software. Results shows that as length of the cylinder increases, buckling load decreases while keeping diameter /thickness ratio constant. Results also reveals that buckling load increases as the diameter / thickness ratio decreases while length of the cylinder kept constant.

     

  • References

    1. [1] B. Brendelt and E. Ramm, †Linear And Nonlinear Stability Analysis Of Cylindrical Shellsâ€, Computers & Structures 1980 Vol. 12. Pp. 549- 558 Pergamon Press Ltd., Mo.

      [2] Th.A. Winterstetter A, H. Schmidt , “Stability Of Circular Cylindrical Steel Shells Under Combined Loadingâ€, Thin-Walled Structures, 2002, 40 , 893–909

      [3] George J. Simitses ,â€Buc kling And Postbuckling Of Imperfect Cylindrical Shells: A Reviewâ€, Appl. Mech. Rev 1986, 39(10), 1517-1524 .

      [4] R. H. Gallagher, “Finite Element Representations For Thin Shell Instability Analysisâ€. Iutam Symposium, Cambridge, Massachusetts , Springer Verlag, Berlin, 1976

      [5] D. O. Brush and B. O. Almroth, “Buckling Of Bars, Plates And Shellsâ€, Mcgraw-Hill, New York , 1975.

      [6] V. I. Weingarten, E. J. Morgan And Paul Seide, “Elastic Stability Of Thin- Walled Cylindrical And Conical Shells Under Axial Compressionâ€, Aiaa Journal , 1964, vol. 3, no. 3 Kim HS & Jeong HS (2007), A nurse short message service by cellular phone in type-2 diabetic patients for six months. Journal of Clinical Nursing 16, 1082–1087.

      [7] P. Mirfakhraei, D. Redekop , “Buckling Of Circular Cylindrical Shells By The Differential Quadrature Methodâ€, International Journal Of Pressure Vessels And Piping, 1998, 75 ,347-353

      [8] Y. Uematsu and K. Uchiyama, “ Deflection And Buckling Behavior Of Thin, Circular Cylindrical Shells Under Wind Loads’, Journal Of Wind Engineering And Industrial Aerodynamics, 1985, 18,245—261.

  • Downloads

  • How to Cite

    Chauhan, S., & Ahmad, A. (2018). Buckling of Circular Cylinder under Axial Load. International Journal of Engineering & Technology, 7(4.39), 404-406. https://doi.org/10.14419/ijet.v7i4.39.24110

    Received date: 2018-12-16

    Accepted date: 2018-12-16

    Published date: 2018-12-13