Hardness of Welded Al 6082 and Al 8011 Plates by Controlling Tilt Angle of Tool in FSW

  • Authors

    • Chandra Vikram Singh
    • Praveen Pachauri
    • S. P. Dwivedi
    • Satpal Sharma
    2018-12-13
    https://doi.org/10.14419/ijet.v7i4.39.24111
  • FSW, Tool speed, Tool shape, tilt angle, L9 orthogonal array, Bend Test

  • Abstract

    In this study, aluminum alloy 6082 and 8011 were welded using friction stir welding technique on vertical milling machine. Tool speed, Tool shape and tilt angle of tool are considered as input parameters. In the present study, hardness test was carried out to identify the surface property of welded joint, while bend test was carried out to find out bend behaviour of welded samples. Taguchi design with L9 orthogonal array was employed to obtain optimum input parameters for better hardness. Hardness for Al6082-Al8011 joint is better for triangular tool shape and minimum rpm i.e. 560 rpm as the smoothness of tool and tool rpm increases there is decrement in the hardness. While, hardness for Al6082-Al8011 joint is better for triangular tool shape and 00 tilt angle as the tool smoothen and the tilt angle increases the hardness decreases.

     

     

  • References

    1. [1] Thomas, WM; Nicholas, ED; Needham, JC; Murch, MG; Temple-Smith, P; Dawes, CJ. “Friction-stir butt welding, GB Patent No. 9125978.8, International patent application No. PCT/GB92/02203, (1991).

      [2] H.J. Liu, H. Fujii, M. Maeda, K.Nogi, “Tensile properties and fracture locations of friction-stir welded joints of 2017-T351 aluminium alloyâ€, Journal of Materials Processing Technology, Vol. 142 (2003); pp. 692–696.

      [3] C.M. Chen, R. Kovacevic, “Finite element modeling of friction stir welding—thermal and Thermo mechanical analysisâ€, International Journal of Machine Tools & Manufacture, Vol. 43 (2003); pp. 1319–1326

      [4] P.Cavalierea, R.Nobilea, F.W.Panellaa, A.Squillace, “Mechanical and micro structural behaviour of 2024–7075 aluminium alloy sheets joined by friction stir weldingâ€, International Journal of Machine Tools & Manufacture, Vol. 46 (2006); pp. 588–594.

  • Downloads

  • How to Cite

    Vikram Singh, C., Pachauri, P., P. Dwivedi, S., & Sharma, S. (2018). Hardness of Welded Al 6082 and Al 8011 Plates by Controlling Tilt Angle of Tool in FSW. International Journal of Engineering & Technology, 7(4.39), 407-409. https://doi.org/10.14419/ijet.v7i4.39.24111

    Received date: 2018-12-16

    Accepted date: 2018-12-16

    Published date: 2018-12-13