Performance Improvement of the SSTDR for Partial Disconnection Fault Detection of Low Voltage Cable

  • Authors

    • Jeong-Chay Jeon
    • Jae-Jin Kim
    • Ga-Ram Han
    • Ji-Man Park
    • Hun Oh
    2018-12-13
    https://doi.org/10.14419/ijet.v7i4.39.24383
  • Power cable, Fault, Insulation damage, Partial disconnection, Reflectometry

  • Abstract

    Background/Objectives: The Spread spectrum time domain reflectometry (SSTDR) among the reflectometry methods is superior to detect cable fault and find its location. But it is hard to find the location of partial disconnection fault.

    Methods/Statistical analysis: This paper usesthe improvedSSTDR, which employs the Wigner Ville Distribution (WVD) based time-frequency correlation analysis (TFCA) and removes the injection signals, in order to detect and locate partial disconnection fault of low voltage cable. The proposed method was validated in partial disconnection cable fault detection and location experiments of F-CV cable used for low voltage power supply in Korea.

    Findings: The improved SSTDR method in the experiment scan find partial disconnection faults accurately and clearly than the existing SSTDR. The proposed method has superior performance to detect and locate soft fault in cable because the maximum value of correlation function for the reflection signal, which injection signal is eliminated, has a value 1 vianormalization and elimination of injection signal.

    Improvements/Applications: The proposed method is looking forward to playing an important role in solving the problem to detect soft cable fault like as partial disconnection and insulation damage. Also, it can be applied to SSTDR devices or other reflectometry equipment used in real cable fault detection sites.

     

     

  • References

    1. [1] Layane Abboud, Andrea Cozza and Lionel Pichon, A Matched-Pulse Approach for Soft-Fault Detection in Complex Wire Networks. IEEE Trans. on Instrumentation and Measurement, 2012 June;61(6):1719-1731.

      [2] N. G. Paulter, An Assessment on the Accuracy of Time-Domain Reflectometry for Measuring the Characteristic Impedance of Transmission Lines. IEEE Trans. on Instrumentation and Measurement, 2001 October;50(5):1381-1388.

      [3] G. H. Shirkoohi, K. Hansan, Enhanced TDR Technique for Fault Detection in Electrical Wires and Cables. 2nd International Symposium on NDT in Aerospace 2010.

      [4] Chirag R. Sharma, Cynthia Furse and Reid R. Harrison, Low-Power STDR CMOS Sensor for Location Faults in Aging Aircraft Wiring.IEEE Sensors Journal, 2007 January;7(1):43-50.

      [5] P. Smith.Spread spectrum time domain reflectometry[dissertation]. Utah University, Logan, United States; 2003.

      [6] Cynthia Furse,A Critical comparison of reflectometry methods for location of wiring faults. Smart Structure and Systems, 2006 January;2(1), 25-46.

      [7] Paul Smith, Cynthia Furse and Jacob Gunther,Analysis of Spread Spectrum Time Domain Reflectometry for Wire Fault Location. IEEE Sensors Journal, 2005 December;5(6), 1469-1478.

      [8] Cynthia Furse, Paul Smith, Mehdi Safavi and Chet Lo,Feasibility of Spread Spectrum Sensors for Location of Arcs on Live Wires. IEEE Sensors Journal, 2005December;5(6), 1445-1450.

      [9] Boualem Boashash: Time Frequency Signal Analysis and Processing; ELSEVIER; 2003

      [10] Y. J. Shin, E. J. Powers, T. S. Choe, C. Y. Hong, E. S. Song, J. G. Yook and J. B. Park, Application of Time -Frequency Domain Reflectometry for Detection and Localization of a Fault on a Coaxial Cable. IEEE Trans. on Instrumentation and Measurement, 2005 December;54(6), 2493-2500

  • Downloads

  • How to Cite

    Jeon, J.-C., Kim, J.-J., Han, G.-R., Park, J.-M., & Oh, H. (2018). Performance Improvement of the SSTDR for Partial Disconnection Fault Detection of Low Voltage Cable. International Journal of Engineering & Technology, 7(4.39), 589-593. https://doi.org/10.14419/ijet.v7i4.39.24383

    Received date: 2018-12-19

    Accepted date: 2018-12-19

    Published date: 2018-12-13