Experimental Study of Pneumatic Two-Stage Small-Size Radial Turbine
-
2018-12-03 https://doi.org/10.14419/ijet.v7i4.38.24490 -
pneumatic drive, turbine drive, jet reaction turbine, Segner wheel, radial turbine, small-size turbine. -
Abstract
This work is aimed at experimental study of the influence of design variables of the first jet reaction stage on the properties of pneumatic two-stage small-size radial turbine. Kinematic layout of the considered turbine is presented, operating processes are described, the final target is formulated to reveal the influence of certain geometrical parameters of the first jet reaction stage which determine overall turbine efficiency. Criterion of nozzle efficiency is determined, variable parameters of multifactorial experiment are selected; experimental facility and procedure of data processing are described. The main experimental results are presented. It is established that the greatest influence on the turbine efficiency is exerted by supersonic nozzle expansion angle. Optimum combination of geometrical expansion extent and geometrical expansion angle of supersonic nozzle of the first jet reaction stage of two-stage small-size radial turbine has been experimentally determined.
Â
Â
-
References
[1] Y.P. Kuznetsov, V.L. Khimich, S.N. Khrunkov, et al., Radial two-stage microturbine for pneumatic actuation, Russian Aeronautics 59(2) (2016) 283-286.
[2] V.L. Khimich, A.B. Chuvakov, V.A. Kikeyev, et al., Two-rimming radial turbine for drive of manual pneumatic grinders, International Journal of Applied Engineering Research 11(16) (2016) 8982-8986.
[3] V.L. Khimich, A.B. Chuvakov, S.N. Khrunkov, Maximum rotation frequency regulators of high-velocity small-sized pneumatic actuators, International Journal of Applied Engineering Research 11(18) (2016) 9256-9260.
[4] V.L. Khimich, A.B. Chuvakov, S.N. Khrunkov, et al., The influence of aerodynamic characteristics of the elements of the flow range of the radial two-row range of the radial two-row microturbine on its dynamic characteristics, International Journal of Applied Engineering Research 11(23) (2016) 11501.
[5] I.I. Kirillov, A.I. Kirillov, Teoriya turbomashin [Theory of turbomachines], Mashinostroenie, Leningrad, 1974.
[6] A.S. Natalevich, Vozdushnye mikroturbiny [Air microturbines], Mashinostroenie, Moscow, 1979.
[7] M.E. Deich, Tekhnicheskaya gazodinamika [Engineering gas dynamics], Energiya, Moscow, 1974.
[8] A.Yu. Fershalov, M.Yu. Fershalov, Yu.Ya. Fershalov, et al., Results of the study rotor wheels supersonic microturbines with a large angle of rotation of the flow, Applied Mechanics and Materials 752-753 (2015) 884-889.
[9] Yu.Ya. Fershalov, M.Yu. Fershalov, A.Yu. Fershalov, Energy efficiency of nozzles for axial microturbines, Procedia Engineering 206 (2017) 499-504.
[10] A.Yu. Fershalov, M.Yu. Fershalov, Yu.Ya. Fershalov, et al., Research data of turbine nozzles of 5-9 degree outlet angles, Applied Mechanics and Materials 770 (2015) 547-550.
[11] A.Yu. Fershalov, M.Yu. Fershalov, Yu.Ya. Fershalov, et al., The design of the nozzle for the nozzle box microturbines, Applied Mechanics and Materials 789-790 (2015) 203-206.
[12] Yu.Ya. Fershalov, T.V. Sazonov Experimental research of the nozzles, Advanced Materials Research 915-916 (2014) 345-348.
[13] T.V. Sazonov, Y.Y. Fershalov, M.Y. Fershalov, et al., Experimental installation for the study of nozzles microturbines, Applied Mechanics and Materials 635-637 (2014) 155-158.
[14] D. Ibragimov, A. Mochalov, Yu. Ilinskiy, Research Data of Microturbine Nozzles with Outlet Angles under 9 Degree (Conference Paper), International Conference on Industrial Engineering, ICIE 2017; Saint-Petersburg; Russian Federation; 16 May 2017 to 19 May 2017; Procedia Engineering 206 (2017) 493-498
[15] Yu.P. Kuznetsov, A.B. Chuvakov, Eksperimental'naya ustanovka dlya issledovaniya malorazmernykh turbinnykh stupenei [Experimental facility for investigation into small-size turbine stages], Izvestiya VUZov. Mashinostroenie, 4 (2013) 58-64.
[16] V.I. Korenbaum, A.A. Tagiltsev, A.E. Kostiv, et al., A low-frequency power-type pressure-gradient receiver for oceanological investigations, Instruments and Experimental Techniques 60 (2017) 5.
[17] Fershalov, Yu. Fershalov, M. Fershalov, et al., Constructive and regime factors influence on turbine wheel characteristics with large rotation flow angle of blades, Polyarnaya mekhanika 3 (2016) 976-985.
[18] A.Yu. Fershalov, Yu.Ya. Fershalov, L.P. Tsigankova, The degree of influence of constructive and regime factors on the characteristics turbine wheel steps shoulder who are more angles of rotation, RECENT ADVANCES in MATHEMATICS, Series "Mathematics and Computers in Science and Engineering Seriesâ€, WSEAS Press, Budapest, 2015, 130-133.
[19] A.Y. Fershalov, Y.Y. Fershalov, M.Y. Fershalov, et al., Analysis and optimization of efficiency rotor wheels microturbines, Applied Mechanics and Materials 635-637 (2014) 76-79.
[20] M.Y. Fershalov, Y.Y. Fershalov, A.Y. Fershalov, et al., Microturbines degree of reactivity, Applied Mechanics and Materials 635-637 (2014) 354-357.
[21] Yu.Ya. Fershalov, Technique for physical simulation of gasodynamic processes in the turbomachine flow passages, Russian Aeronautics 55(4) (2012) 424-429.
-
Downloads
-
How to Cite
Pavlovich Kuznetsov, Y., Anatolevich Zakharov, L., Nikolaevich Khrunkov, S., Aleksandrovich Kraynov, A., & Evgenevich Zhukov, A. (2018). Experimental Study of Pneumatic Two-Stage Small-Size Radial Turbine. International Journal of Engineering & Technology, 7(4.38), 305-308. https://doi.org/10.14419/ijet.v7i4.38.24490Received date: 2018-12-21
Accepted date: 2018-12-21
Published date: 2018-12-03