Biomimicry – Core Stages, Design Process, and Gaps

  • Authors

    • Chin Toong Foo
    • Badrul Omar
    • Azlis-Sani Jalil
    2019-01-24
    https://doi.org/10.14419/ijet.v8i1.1.24775
  • Bio-inspired design, Biomimicry, Function-Behaviour-Structure, Pattern language, TRIZ
  • Nature is a world-scale R&D in a laboratory called the universe. Some of the best inventions and innovations are actually built based on nature’s design. But in order to wield the power of nature’s design, one must first learn about the three core stages of biomimicry: Search, Abstract, and Transfer. One must also know the steps of designing with biomimicry, either problem-driven or solution-based design process. Since Theory of Inventive Principles (TRIZ) is known as the most promising tool to bridge the biology-engineering gap, this paper presented both problem-driven and solution based design process with TRIZ cycle. There had been many biomimicry tools emerging since 1987, but tuning and refinements are still required. The biology-engineering gap is still far from being bridged. This paper presented some of the ideas of potential approaches in bridging the biology-engineering gap; TRIZ, Function-Behaviour-Structure (FBS) modelling, and pattern language.

     

     

  • References

    1. [1] Bar-Cohen Y, “Biomimetics - Using nature to inspire human innovation,†Bioinspiration and Biomimetics, Vol.1, No.1, pp.1–12, 2006.

      [2] Haberland M & Kim S, “On extracting design principles from biology: I. Method-General answers to high-level design questions for bioinspired robots,†Bioinspiration and Biomimetics, Vol.10, No. 1, 2015.

      [3] Kumakura Y, “Biomimetics - State of the Art and its Application to Industry,†Vol.13, No.6, pp.1–13, 2000.

      [4] Al-Obaidi KM, Azzam Ismail M, Hussein H, & Abdul Rahman AM, “Biomimetic building skins: An adaptive approach,†Renew. Sustain. Energy Rev., Vol.79, pp.1472–1491, 2017.

      [5] Singh A & Nayyar N, “Biomimicry-An Alternative Solution to Sustainable Buildings,†J. Civ. Eng. Environ. Technol., Vol.2, No.14, pp.96–101, 2015.

      [6] Szojka A, Lalh K, Andrews SHJ, Jomha NM, Osswald M, & Adesida AB, “Biomimetic 3D printed scaffolds for meniscus tissue engineering,†Bioprinting, Vol.8, pp.1–7, 2017.

      [7] Singh N, Petrinic I, Hélix-Nielsen C, Basu S, & Balakrishnan M, “Concentrating molasses distillery wastewater using biomimetic forward osmosis (FO) membranes,†Water Res., Vol.130, pp.271–280, 2018.

      [8] Sheikhpour M, Barani L, & Kasaeian A, “Biomimetics in drug delivery systems: A critical review,†J. Control. Release, vol.253, pp.97–109, 2017.

      [9] Yu H, Lyu Y, Wang J, & Wang X, “A biomimetic engineered grinding wheel inspired by phyllotaxis theory,†J. Mater. Process. Technol., Vol.251, pp.267–281, 2018.

      [10] Reisen K, Teschemacher U, Niehues M, & Reinhart G, “Biomimetics in Production Organization - A Literature Study and Framework,†J. Bionic Eng., Vol.13, No.2, pp.200–212, 2016.

      [11] Hernandez S & Brebbia CA, Design and Nature VI: Comparing Design in Nature with Science and Engineering. WIT Press, 2012.

      [12] Schmitt OH, “Some interesting and useful biomimetic transforms,†Proceeding 3rd Int. Biophys. Congr., p. 297, 1969.

      [13] Gebeshuber IC, Gruber P, & Drack M, “A gaze into the crystal ball: Biomimetics in the year 2059,†Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., Vol.223, No.12, pp.2899–2918, 2009.

      [14] Vincent JFV, Bogatyreva OA, Bogatyrev NR, Bowyer A, & Pahl AK, “Biomimetics: its practice and theory,†J. R. Soc. Interface, Vol. 3, No.9, pp.471–482, 2006.

      [15] Wadia AP & McAdams DA, “Developing Biomimetic Guidelines for the Highly Optimized and Robust Design of Complex Products or Their Components,†Eng. Conf., 2010.

      [16] Wanieck K, Fayemi PE, Maranzana N, Zollfrank C, & Jacobs S, “Biomimetics and its tools,†Bioinspired, Biomim. Nanobiomaterials, Vol.6, No.2, pp.53–66, 2017.

      [17] Helms M, Vattam SS, & Goel AK, “Biologically inspired design: process and products,†Des. Stud., Vol.30, No.5, pp.606–622, 2009.

      [18] VDI6220, VDI 6220: Biomimetics - Conception and strategy - Differences between bionic and conventional methods/products. German, 2011, p.36.

      [19] Shu LH, Ueda K, Chiu I, & Cheong H, “Biologically inspired design,†J. Ocean Technol., Vol.6, No.4, pp.42–54, 2011.

      [20] Nagel JKS, Stone RB, & Mcadams DA, “An engineering-to-biology Thesaurus for engineering design,†Proc. ASME 2010 Int. Des. Eng. Tech. Conf. Comput. Inf. Eng. Conf., pp.1–11, 2010.

      [21] “Biomimicry 3.8,†2016. [Online]. Available: https://biomimicry.net/. [Accessed: 08-Jan-2018].

      [22] “Biomimicry Institute,†2017. [Online]. Available: https://biomimicry.org/. [Accessed: 08-Jan-2018].

      [23] Shu LH, “A natural-language approach to biomimetic design,†Artif. Intell. Eng. Des. Anal. Manuf. AIEDAM, Vol.24, No.4, pp.507–519, 2010.

      [24] Campbell I, “Applying Ostensive Functionalism in the place of Descriptive Proceduralism: ‘The query is dead,’†Proc. Br. Comput. Soc. Work. "Information Retr. Human-computer Interact. Univ. Glas. Sept. 1996, pp.1–5, 1996.

      [25] Haseyama M, Ogawa Y, Takahashi S, Nomura S, & Shimomura M, “Biomimetics image retrieval platform,†IEICE Trans. Inf. Syst., vol. E100D, No.8, pp.1563–1573, 2017.

      [26] Speck T & Speck O, “Process sequences in biomimetic research,†WIT Trans. Ecol. Environ., Vol.114, pp.3–11, 2008.

      [27] Helfman Cohen Y, Reich Y, & Greenberg S, “Biomimetics: Structure–Function Patterns Approach,†J. Mech. Des., Vol.136, No.11, p.111108, 2014.

      [28] Chakrabarti A, Sarkar P, Leelavathamma B, & Nataraju BS, “A functional representation for aiding biomimetic and artificial inspiration of new ideas,†Artif. Intell. Eng. Des. Anal. Manuf. AIEDAM, Vol.19, No.2, pp.113–132, 2005.

      [29] Srinivasan V & Chakrabarti A, “Sapphire – an Approach To Analysis and Synthesis,†Iced’09, pp.417–428, 2009.

      [30] Vincent JFV, “Research and Practice on the Theory of Inventive Problem Solving (TRIZ),†2016.

      [31] Vattam S, Wiltgen B, Helms M, Goel A, & Yen J, “DANE: Fostering creativity in and through biologically inspired design,†Vol.8, pp.115–122, 2010.

      [32] Chakrabarti A, Siddharth L, Dinakar M, Panda M, Palegar N, & Keshwani S, “Idea Inspire 3.0 - A Tool for Analogical Design,†Vol.66, 2017.

      [33] Fayemi PE, Maranzana N, & Bersano G, “Bio-Inspired Design Characterisation and Its Links With Problem Solving,†2014.

      [34] Helfman Cohen Y & Reich Y, Biomimetic Design Method for Innovation and Sustainability. Springer International Publishing Switzerland, 2016.

      [35] Fayemi PE, Wanieck K, Zollfrank C, Maranzana N, & Aoussat A, “Biomimetics: Process, tools and practice,†Bioinspiration and Biomimetics, Vol.12, No.1, 2017.

      [36] Schild K, Herstatt C, & Lüthje C, “How to use analogies for breakthrough innovations,†2004.

      [37] Sartori J, Pal U, & Chakrabarti A, “A methodology for supporting ‘transfer’ in biomimetic design,†Artif. Intell. Eng. Des. Anal. Manuf. AIEDAM, Vol.24, No.4, pp.483–505, 2010.

      [38] Vandevenne D, Verhaegen PA, Dewulf S, & Duflou JR, “Product and organism aspects for scalable systematic biologically-inspired design,†Procedia Eng., Vol.131, pp.784–791, 2015.

      [39] Çengel YA & Ghajar AJ, Heat and Mass Transfer: Fundamentals & Applications, 5th ed. New York: McGraw-Hill Education, 2015.

      [40] Pahl G & Beitz W, Engineering Design: A Systematic Approach. Springer-Verlag London Limited, 2003.

      [41] Stegmaier T, Linke M, & Planck H, “Bionics in textiles: flexible and translucent thermal insulations for solar thermal applications,†Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., Vol.367, No.1894, pp.1749–1758, 2009.

      [42] Gilbert C, Robertson G, Le Maho Y, Naito Y, & Ancel A, “Huddling behavior in emperor penguins: Dynamics of huddling,†Physiol. Behav., Vol.88, No.4–5, pp.479–488, 2006.

      [43] Stevens ED & Kendall J, “Vascular Anatomy of the Counter-Current Heat Exchanger of Skipjack Tuna*,†J. Exp. Biol, Vol.61, pp.145–153, 1974.

      [44] Tattersall GJ, Andrade DV, & Abe AS, “Heat exchange from the toucan bill reveals a controllable vascular thermal radiator,†Science (80-. )., Vol.325, No.5939, pp.468–470, 2009.

      [45] Ocko SA, King H, Andreen D, Bardunias P, Turner JS, Soar R, & Mahadevan L, “Solar-powered ventilation of African termite mounds,†J. Exp. Biol., Vol.220, No.18, pp.3260–3269, 2017.

      [46] Helms ME, Vattam SS, Goel AK, Yen J, & Weissburg M, “Problem-Driven and Solution-Based Design : Twin Processes of Biologically Inspired Design,†Assoc. Comput. Aided Des. Archit., No.4, pp.1–9, 2008.

      [47] Baldussu A & Cascini G, “About integration opportunities between TRIZ and biomimetics for inventive design,†Procedia Eng., Vol.131, pp.3–13, 2015.

      [48] Altshuller GS, And suddenly the inventor appeared: TRIZ, the theory of inventive problem solving. Technical Innovation Center, Inc., 2004.

      [49] Ekmekci I & Koksal M, “Triz Methodology and an Application Example for Product Development,†Procedia - Soc. Behav. Sci., Vol.195, pp.2689–2698, 2015.

      [50] Currie J, Fung K, Mazza AG, Wallace JS, & Shu LH, “A comparison of biomimetic design and TRIZ applied to the design of a proton exchange membrane fuel cell,†Proc. Can. Eng. Educ. Assoc., 2009.

      [51] Vincent JFV & Mann DL, “Systematic technology transfer from biology to engineering.,†Philos. Trans. A. Math. Phys. Eng. Sci., Vol.360, No.1791, pp.159–73, 2002.

      [52] Mann DL, “System Operator Tutorial - 1) 9-Windows On The World,†Triz J., No.3, 2001.

      [53] López J, de Almeida RL, & Araujo-Moreira FM, “TRIZ: creativity as an exact science?,†Rev. Bras. Ensino Física, Vol.27, No.2, pp.205–209, 2005.

      [54] Shulyak L, “Introduction to TRIZ,†pp.1-7 2009.

      [55] Salamatov Y, The Right Solution at the Right Time: A Guide to Innovative Problem Solving, 2nd ed. 2005.

      [56] Mann DL, “Ideality and ‘Self-X’ Part 1: Things That Do Things For Themselves,†2003.

      [57] Murray A, Skene K, & Haynes K, “The Circular Economy: An Interdisciplinary Exploration of the Concept and Application in a Global Context,†J. Bus. Ethics, Vol.140, No.3, pp.369–380, 2017.

      [58] Altshuller GS, Creativity as an exact science: The theory of the solution of inventive problems. New York: Gorden and Breach Science Publishers, 1984.

      [59] Chandrasekaran B, “Functional Representation and Causal Processes,†pp.71, 1994.

      [60] Deng YM, “Function and Behavior Representation in Conceptual Mechanical Design,†Artif. Intell. Eng. Des. Anal. Manuf., Vol.16, No.5, pp.343–362, 2002.

      [61] Gero JS & Kannengiesser U, “The situated function-behaviour-structure framework,†Des. Stud., Vol.25, No.4, pp.373–391, 2004.

      [62] Kuipers B, “Commonsense Reasoning about Causality: Deriving Behaviour from Structure,†in Qualitative Reasoning About Physical Systems, pp.169–203, 1984.

      [63] Nagel RL, Midha PA, Tinsley A, Stone RB, McAdams DA, & Shu LH, “Exploring the Use of Functional Models in Biomimetic Conceptual Design,†J. Mech. Des., Vol.130, No.12, pp.1-13, 2008.

      [64] Keuneke AM, “Device Representation The Significance of Functional Knowledge,†IEEE Expert. Syst. their Appl., Vol.6, No.2, pp.22–25, 1991.

      [65] Vermaas PE & Dorst K, “On the conceptual framework of John Gero’s FBS-model and the prescriptive aims of design methodology,†Des. Stud., Vol.28, No.2, pp.133–157, 2007.

      [66] Galle P, “The ontology of Gero’s FBS model of designing,†Des. Stud., Vol.30, No.4, pp.321–339, 2009.

      [67] Goel AK, Rugaber S, & Vattam S, “Structure, behavior, and function of complex systems: The structure, behavior, and function modeling language,†Artif. Intell. Eng. Des. Anal. Manuf., Vol.23, No.1, pp.23, 2009.

      [68] Umeda Y, Takeda H, Tomiyama T, & Yoshikawa H, “Function, behaviour, and structure,†Applications of Artificial Intelligence in Engineering V, Vol.1, pp.177–193, 1990.

      [69] Al-fedaghi S, “Function-Behavior-Structure Model of Design : An Alternative Approach,†Vol.7, No.7, pp.133–139, 2016.

      [70] Alexander C, Ishikawa S, & Silverstein M, A Pattern Language: Towns, Buildings, Construction. London, New York: Oxford University Press, pp.1218, 1977.

      [71] Alexander C, “The Timeless Way of Building,†New York Oxford University Press, pp.546, 1979.

      [72] Salustri F, “Using pattern languages in design engineering,†15th Int. Conf. Eng. Des., 2005.

      [73] Hoeller N, Salustri F, DeLuca D, Zari MP, Love M, McKeag T, Stephens E, Reap J, & Sopchak L, “Patterns from nature,†Proc. SEM Annu. Conf. Expo. Exp. Appl. Mech. 2007, Vol.3, pp.1481–1491, 2007.

  • Downloads

  • How to Cite

    Toong Foo, C., Omar, B., & Jalil, A.-S. (2019). Biomimicry – Core Stages, Design Process, and Gaps. International Journal of Engineering & Technology, 8(1.1), 15-25. https://doi.org/10.14419/ijet.v8i1.1.24775