A tactical multi-objective multi-product green supply chain planning optimization model

  • Authors

    • M. S. Al-Ashhab Umm Al-Qura University
    • E A. Mlybari Umm Al-Qura University
    2019-05-27
    https://doi.org/10.14419/ijet.v7i4.24836
  • Green Supply Chain, Multi-Objective, Production Planning, Goal Programming, Multi-Products, Risk, Transportation Modes.

  • In this paper, a Multi-objective, multi-products, and multi-period green supply chain optimization model that consider some important economic and environmental risks and their associated impacts are developed using the lexicographic procedure. Managing the impacts of both side of economic and environmental risks, maximizing opportunities’ impacts and minimizing threats’ impacts. Economic impacts include maximizing profit, maximizing the overall service level while minimizing the total cost, and the environmental impacts include minimizing energy consumption and minimizing CO2 emissions from transportation operations. The model considers transportation mode selection (Heavy or light trucks). The model efficacy has been proved through results discussion. Moreover, the effect of different allowable deviation on the objectives is discussed.

     

     

  • References

    1. [1] D. M. Lambert, J. R. Stock, and L. M. Ellram, Fundamentals of logistics management: McGraw-Hill/Irwin, 1998.

      [2] S. Chopra and P. Meindl, "Supply chain management. Strategy, planning & operation," in Das summa summarum des management, ed: Springer, 2007, pp. 265-275. https://doi.org/10.1007/978-3-8349-9320-5_22.

      [3] J. T. Mentzer, W. DeWitt, J. S. Keebler, S. Min, N. W. Nix, C. D. Smith, et al., "Defining supply chain management," Journal of Business logistics, vol. 22, pp. 1-25, 2001. https://doi.org/10.1002/j.2158-1592.2001.tb00001.x.

      [4] M. Bonney and M. Y. Jaber, "Environmentally responsible inventory models: Non-classical models for a non-classical era," International Journal of Production Economics, vol. 133, pp. 43-53, 2011. https://doi.org/10.1016/j.ijpe.2009.10.033.

      [5] T. P. N. Le and T.-R. Lee, "Model selection with considering the CO 2 emission alone the global supply chain," Journal of Intelligent Manufacturing, vol. 24, pp. 653-672, 2013. https://doi.org/10.1007/s10845-011-0613-6.

      [6] K. Hoen, T. Tan, J. Fransoo, and G. Van Houtum, "Effect of carbon emission regulations on transport mode selection under stochastic demand," Flexible Services and Manufacturing Journal, vol. 26, pp. 170-195, 2014. https://doi.org/10.1007/s10696-012-9151-6.

      [7] E. Demir, T. BektaÅŸ, and G. Laporte, "A review of recent research on green road freight transportation," European Journal of Operational Research, vol. 237, pp. 775-793, 2014. https://doi.org/10.1016/j.ejor.2013.12.033.

      [8] C. Lin, K. L. Choy, G. T. Ho, S. H. Chung, and H. Lam, "Survey of green vehicle routing problem: past and future trends," Expert Systems with Applications, vol. 41, pp. 1118-1138, 2014. https://doi.org/10.1016/j.eswa.2013.07.107.

      [9] S. Jain, E. Lindskog, J. Andersson, and B. Johansson, "A hierarchical approach for evaluating energy trade-offs in supply chains," International Journal of Production Economics, vol. 146, pp. 411-422, 2013. https://doi.org/10.1016/j.ijpe.2013.03.015.

      [10] G. Xie, "Modeling decision processes of a green supply chain with regulation on energy saving level," Computers & Operations Research, vol. 54, pp. 266-273, 2015. https://doi.org/10.1016/j.cor.2013.11.020.

      [11] A. Genovese, S. Lenny Koh, G. Bruno, and E. Esposito, "Greener supplier selection: state of the art and some empirical evidence," International Journal of Production Research, vol. 51, pp. 2868-2886, 2013. https://doi.org/10.1080/00207543.2012.748224.

      [12] L. Y. Lu, C. Wu, and T.-C. Kuo, "Environmental principles applicable to green supplier evaluation by using multi-objective decision analysis," International Journal of Production Research, vol. 45, pp. 4317-4331, 2007. https://doi.org/10.1080/00207540701472694.

      [13] S. Mirzapour Al-e-Hashem, A. Baboli, and Z. Sazvar, "A stochastic aggregate production planning model in a green supply chain: Considering flexible lead times, nonlinear purchase and shortage cost functions," European Journal of Operational Research, vol. 230, pp. 26-41, 2013. https://doi.org/10.1016/j.ejor.2013.03.033.

      [14] B. Sundarakani, R. De Souza, M. Goh, S. M. Wagner, and S. Manikandan, "Modeling carbon footprints across the supply chain," International Journal of Production Economics, vol. 128, pp. 43-50, 2010. https://doi.org/10.1016/j.ijpe.2010.01.018.

      [15] J. Glover, D. Champion, K. Daniels, and A. Dainty, "An Institutional Theory perspective on sustainable practices across the dairy supply chain," International Journal of Production Economics, vol. 152, pp. 102-111, 2014. https://doi.org/10.1016/j.ijpe.2013.12.027.

      [16] K.-H. Lee, "Integrating carbon footprint into supply chain management: the case of Hyundai Motor Company (HMC) in the automobile industry," Journal of cleaner production, vol. 19, pp. 1216-1223, 2011. https://doi.org/10.1016/j.jclepro.2011.03.010.

      [17] F. Wang, X. Lai, and N. Shi, "A multi-objective optimization for green supply chain network design," Decision Support Systems, vol. 51, pp. 262-269, 2011. https://doi.org/10.1016/j.dss.2010.11.020.

      [18] C. H. Glock, "The joint economic lot size problem: A review," International Journal of Production Economics, vol. 135, pp. 671-686, 2012. https://doi.org/10.1016/j.ijpe.2011.10.026.

      [19] M. Bonney and M. Y. Jaber, "Deriving research agendas for manufacturing and logistics systems: A methodology," International Journal of Production Economics, vol. 157, pp. 49-61, 2014. https://doi.org/10.1016/j.ijpe.2013.12.007.

      [20] J. Sarkis, "A strategic decision framework for green supply chain management," Journal of cleaner production, vol. 11, pp. 397-409, 2003. https://doi.org/10.1016/S0959-6526(02)00062-8.

      [21] T. Sawik, "A lexicographic approach to bi-objective scheduling of single-period orders in make-to-order manufacturing," European Journal of Operational Research, vol. 180, pp. 1060-1075, 2007. https://doi.org/10.1016/j.ejor.2006.05.023.

      [22] G. Mavrotas, "Effective implementation of the ε-constraint method in multi-objective mathematical programming problems," Applied mathematics and computation, vol. 213, pp. 455-465, 2009. https://doi.org/10.1016/j.amc.2009.03.037.

      [23] M. S. Pishvaee, J. Razmi, and S. A. Torabi, "Robust possibilistic programming for socially responsible supply chain network design: A new approach," Fuzzy sets and systems, vol. 206, pp. 1-20, 2012. https://doi.org/10.1016/j.fss.2012.04.010.

      [24] G. Guillén, F. Mele, M. Bagajewicz, A. Espuna, and L. Puigjaner, "Multiobjective supply chain design under uncertainty," Chemical Engineering Science, vol. 60, pp. 1535-1553, 2005. https://doi.org/10.1016/j.ces.2004.10.023.

      [25] F. Altiparmak, M. Gen, L. Lin, and T. Paksoy, "A genetic algorithm approach for multi-objective optimization of supply chain networks," Computers & industrial engineering, vol. 51, pp. 196-215, 2006. https://doi.org/10.1016/j.cie.2006.07.011.

      [26] S. Liu and L. G. Papageorgiou, "Multiobjective optimisation of production, distribution and capacity planning of global supply chains in the process industry," Omega, vol. 41, pp. 369-382, 2013. https://doi.org/10.1016/j.omega.2012.03.007.

      [27] M. S. Al-Ashhab, T. Attia, and S. M. Munshi, "Multi-Objective Production Planning Using Lexicographic Procedure," American Journal of Operations Research, vol. 7, p. 174, 2017. https://doi.org/10.4236/ajor.2017.73012.

  • Downloads

  • How to Cite

    S. Al-Ashhab, M., & A. Mlybari, E. (2019). A tactical multi-objective multi-product green supply chain planning optimization model. International Journal of Engineering & Technology, 7(4), 6192-6199. https://doi.org/10.14419/ijet.v7i4.24836