Development of Internet of Things Optical Sensor based on Surface Plasmon Resonance Phase Interferometry

  • Authors

    • Tan Hock Kin
    • Norhana Arsad
    • Mohd Hadri Hafiz Mokhtar
    • Mohd Saiful Dzulkefly Zan
    • Nur Hidayah Azeman
    • Ahmad Ashrif A Bakar
    2019-01-30
    https://doi.org/10.14419/ijet.v8i1.2.24906
  • BenchVu, LabVIEW, Internet of Things, Optical sensor, Real-time monitoring,
  • This paper demonstrates the integration between an Internet of Things platform and an optical sensor based on surface plasmon resonance (SPR) phase interferometry. The optical sensing system starts when the liquid containing the heavy metal is flowing through the top surface of a glass prism.  A laser is turned on and a motor can sweep from 0 to 90 degrees initially. Data is collected by a photodiode sensor. The SPR angle is determined where the reflectivity of light falls to the minimum level. The motor rotation is then fixed at the SPR angle. Self-mixing interferometry is applied by reflecting back the light from laser using a piezo actuator. The resulting phase difference is measured, and the concentration of heavy metal can be determined using virtual instrument (VI). VI consists of control of the optical sensing system which is built in LabVIEW software and installed in a host computer. A web page is created based on the VI using Web Publishing Tool which allows user to monitor the data collected from the optical sensor by entering the URL address in the Internet Explorer from the client computer. Keysight BenchVue software is used to monitor and control the function of oscilloscope. The result of this project is an optical sensor capable of sensing different concentration of heavy metals in which the real-time data collected from it can be monitored remotely using computer and smartphone.

     

     

  • References

    1. [1] Bagula A & Pietrosemoli E (n.d.), Internet of Things IN 5 DAYS.

      [2] Press G (2017), Internet of Things By The Numbers : Market Estimates And Forecasts 2017–2019.

      [3] Halvorsen H (2016), Introduction to LabVIEW.

      [4] Programming D, Visual M & Language P (2017), Benefits of Programming Graphically in NI LabVIEW 1–5.

      [5] Simplify CA (2017). Keysight Technologies BenchVue Software 2017 ( BV0000A ) 2017.

      [6] Liang J (2011) NIH Public Access 87(7): 742-746.

      [7] Resonance SP & Tir R (n.d.), SPR Theory (1): 1–5.

      [8] That â€TM Internet of Things â€TM Thing. 2010. 4986.

      [9] Kabashin AV, Patskovsky S, Grigorenko AN, Méditerranée UDe (2009), Phase and amplitude sensitivities in surface plasmon resonance bio and chemical sensing 17(23): 151–161.

      [10] Kashif M, Bakar AAA., Arsad N, & Shaari S (2014), Development of Phase Detection Schemes Based on Surface Plasmon Resonance Using Interferometry 15914–15938.

      [11] Kliese R, Taimre T, Baka AAA, Lim YL, Nikolić M, Perchoux J, Bosch T (2014). Solving self-mixing equations for arbitrary feedback levels : a concise algorithm To cite this version : HAL Id : hal-01091363 Solving self-mixing equations for arbitrary feedback levels : a concise algorithm.

  • Downloads

  • How to Cite

    Hock Kin, T., Arsad, N., Hadri Hafiz Mokhtar, M., Saiful Dzulkefly Zan, M., Hidayah Azeman, N., & Ashrif A Bakar, A. (2019). Development of Internet of Things Optical Sensor based on Surface Plasmon Resonance Phase Interferometry. International Journal of Engineering & Technology, 8(1.2), 220-225. https://doi.org/10.14419/ijet.v8i1.2.24906