Seismic and blast loading performance of a gypsum panelled prefabricated building

  • Authors

    • Gayathri G
    • K M Mini
    • Sruthy S
    2018-09-22
    https://doi.org/10.14419/ijet.v7i4.5.25055
  • Blast Analysis, Collapse, FE Method, Prefabricated Building, Seismic Analysis, Static Analysis.

  • Abstract

    Urge for modern technologies and limited space leads to the idea of light weight building technology that can resist major loading condi- tions and can even be used in lands with very poor soil profile. For proper understanding of the structural response, building needs to be evaluated for natural hazards like seismic and manmade calamities like blast loading along with the normal forces acting on the structure. Whole building and structural components are also to be evaluated to study the progressive collapse of the building. This paper includes the study of static, seismic and blast loading effects on a conventional and a prefabricated building. The structural components and con- nections are also evaluated to forecast the strength of a prefabricated building using FE method. Gypsum wall panel incorporated with glass fibres and casted with cavities, as hollow and filled, are used as building panel. This study is useful in suggesting an innovative technology which is light in weight and cost effective with composite structural components.

     

  • References

    1. [1] IS: 456-2000, “Indian Standard Plain and Reinforced Concrete-Code of Practiceâ€, Bureau of Indian Standards, New Delhi.

      [2] IS: 800-2007. “Indian Standard General Construction in Steel Code of Practiceâ€, Bureau of Indian Standards, New Delhi.

      [3] IS: 875 (Part I)-1987, “Indian Standard Code of Prac- tice for Design Loads (Other than earthquake) for Build- ing and Structuresâ€, Bureau of Indian Standards, New Delhi.

      [4] IS: 875 (Part II)-1987, “Indian Standard Code of Prac- tice for Design Loads (Other than earthquake) for Build- ing and Structuresâ€, Bureau of Indian Standards, New Delhi.

      [5] IS: 875 (Part III)-1987, “Indian Standard Code of Prac- tice for Design Loads (Other than earthquake) for Build- ing and Structuresâ€, Bureau of Indian Standards, New Delhi.

      [6] IS: 1893 (Part 4)-2002, “Indian Standard Criteria for earthquake Resistant Design of Structuresâ€, Bureau of Indian Standards, New Delhi. 182.

      [7] IS: 2911 (Part me /Sec 2)-1979, “Indian Standard Code of Practice for Design and Construction of Pile Founda- tionsâ€, Bureau of Indian Standards, New Delhi.

      [8] SP 16: 1980, “Design Aids for Reinforced Concrete to IS: 456-1978â€, Bureau of Indian Standards, New Delhi.

      [9] SP 34: 1987, “Hand Book on Concrete Reinforcement and Detailingâ€, Bureau of Indian Standards, New Delhi.

      [10] IS 13920: 1993, “Indian Standard Code of Practice for Ductile Detailing of Reinforced Concrete Structures Subjected to Seismic Forcesâ€, Bureau of Indian Stand- ards, New Delhi.

      [11] Chris P. Pantelides; Bret A. Burkhart; Lawrence D. Reaveley; and David Platt “Short-span and full-scale experiments of a prefabricated composite floor-building systemâ€, ASCE J.Perform.Constr. Facil, 2016.

      [12] Allah Dad Ahmadi and Reza Razani, “Designing and Comparison of some samples of prefabricated concrete sandwiched ceiling slabs with lightweight concrete coreâ€, Journal of Research and Development, 2, No.2, 2014.

      [13] Brian Uy, Vipulkumar Patel, Dongxu Li, Farhad Aslani, “Behaviour and Design of Connections for Demountable Steel and Composite Structuresâ€, journal of construc- tional steel research , 9, April 2016.

      [14] Fangxin Hu, Gang Shi, Yu Bai, Yongjiu Shi “Seismic performance of prefabricated steel beam-to-column connections†journal of constructional steel research, 102, April 2014, 204-216.

      [15] L. K. Stewart,â€Testing and analysis of structural steel columns subjected to blast loads†[Ph.D. thesis], Uni- versity of California, San Diego.

      [16] B.W. Schafer, D. Ayhana, J. Lenga, P. Liua, D. Padilla- Llano, K.D. Petermana, “Seismic response and engi- neering of cold-formed steel framed buildingsâ€, advanc- es in the steel structures and engineering, 8, part 2, Pages 197-212, November 2016

      [17] T. Ngo, P. Mendis, A. Gupta & J. Ramsay, “ Blast load- ing and blast effects on Structures – An Overviewâ€, EJSE Special Issue: Loading on Structures (2007).

      [18] B.M. Luccioni, R.D. Ambrosini, R.F. Danesi, “Analysis of building collapse under blast loadsâ€, Engineering structures, 26(1):63-71 · January 2004.

      [19] Lawrance KL (2002). ANSYS Tutorial Release 7.0 and 6.1, SDC Publications, Canonsburg, 1.1- 2.25

      [20] ISO 9004-1. Quality management and Quality system elements part 1.

      [21] Umesh Jamakhandhi and Dr SB Vana kudra, â€Design and analysis of blast load on structuresâ€, International Research Journal of Engineering and Technology (IR- JET), 02 Issue: 07, Oct-2015.

      [22] AISC Code of Standard Practice for Steel Buildings and Bridges and all previous versions, American Institute of Steel Construction, April 14, 2010.

  • Downloads

  • How to Cite

    G, G., M Mini, K., & S, S. (2018). Seismic and blast loading performance of a gypsum panelled prefabricated building. International Journal of Engineering & Technology, 7(4.5), 669-677. https://doi.org/10.14419/ijet.v7i4.5.25055

    Received date: 2018-12-30

    Accepted date: 2018-12-30

    Published date: 2018-09-22