Experimental Investigation of Solar Room Heater for Commercial Purpose

  • Authors

    • Vineet Singh
    • V R. Mishra
    • Akash Nigam
    • Niraj Kumar
    • Anurag Mahewari
    • Saurabh Kushwaha
    2018-12-13
    https://doi.org/10.14419/ijet.v7i4.39.25587
  • Solar Room Heater, Tin Cans, Thermocots, Heated Air, Thermometer.

  • Abstract

    According to the present era the requirement of the energy is continuously increasing. At the earth surface abundant quantity of heat is available but not in useful form, one of the main source of this energy is Solar which is available free of cost. On the basis of this theory we have designed a solar room heater by using tin cans soldered with spiral wire for increasing heat transfer between air and solar heat present in the collector. After designing the experimental set up experiment will be carried out for finding the outlet temperature, velocity of air for calculating heat transfer and pressure drop, heat transfer characteristics across the solar air heater. In this study, we have concluded the temperature of inlet air will improve around 170C to 200C without using any external device like blower and fans.

     

  • References

    1. [1] The Solar Thermal Air Heating and Cooling Association (STA), http://solarairheating.org.au/

      [2] R.S. Gill, Sukhmeet Singh, Parm Pal Singh, Lowcostsolarairheater, Energy Conversion and Management,2012

      [3] M.K. Mittala, Varuna, R.P. Saini, S.K. Singal, Effectiveefficiency of solar airheatershavingdifferenttypes of roughnesselementsontheabsorberplate, Elsevier, Energy 32 (2007) 739–745, September 2005

      [4] Sukhatme S.P., "Solar Energy: Principles of ThermalCollectionsandStorage", TataMcGraw-Hill, NewDelhi2003.

      [5] The Solar Thermal Air Heating and Cooling Association (STA), http://solarairheating.org.au/

      [6] R.S. Gill, Sukhmeet Singh, Parm Pal Singh,Low cost solar air heater,Energy Conversion and Management,2012

      [7] M.K. Mittala, Varuna, R.P. Saini, S.K. Singal, Effective efficiency of solar air heaters having different types of roughness elements on the absorber plate, Elsevier, Energy 32 (2007) 739–745,September 2005

      [8] Karmare SV, Tikekar AN. Experimental investigation of optimum thermo hydraulic performance of solar air heaters with metal rib grits roughness. Sol Energy 2009;83:6–13.

      [9] Saini RP, Verma J. Heat transfer and friction factor correlations for a duct having dimple-shape artificial roughness for solar air heaters. Energy 2008;33:1277–87.

      [10] Varun, Saini RP, Singal SK. Investigation of thermal performance of solar air heater having roughness elements as a combination of inclined and transverse ribs on the absorber plate. Renew Energy 2008;33:1398–405.

      [11] ManashDeyEffect of Artificial Roughness on Solar Air Heater: An Experimental Investigation, Int. Journal of Engineering Research and Application Vol. 3, Issue 5, Sep-Oct 2013, pp.88-95.

      [12] Bopche SB, Tandale MS. Experimental investigations on heat transfer and frictionalcharacteristics of a turbulator roughened solar air heater duct. Int J Heat MassTransf 2009;52:2834–48.

      [13] Thakur DS, Khan MK, Pathak M. Performance evaluation of solar air heater with novel hyperbolic rib geometry. Renew Energy 2017;105:786–97. http://dx.doi.org/ 10.1016/j.renene.2016.12.092.

      [14] Singh S. Performance evaluation of a novel solar air heater with arched absorber plate. Renew Energy 2017;114:879–86. http://dx.doi.org/10.1016/j.renene.2017. 07.109.

      [15] Kabeel AE, Khalil A, Shalaby SM, Zayed ME. Investigation of the thermal performances of flat, finned, and v corrugated plate solar air heaters. J Sol Energy Eng2016; 138:051004. http://dx.doi.org/10.1115/1.4034027.

      [16] Singh A, Singh S. CFD investigation on roughness pitch variation in non-uniform cross-section transverse rib roughness on Nusselt number and friction factor characteristics of solar air heater duct. Energy 2017;128:109–27.

      [17] Singh I, Singh S. CFD analysis of solar air heater duct having square wave profiled transverse ribs as roughness elements. Sol Energy 2018;162:442–53. http://dx.doi. org/10.1016/j.solener.2018.01.019.

  • Downloads

  • How to Cite

    Singh, V., R. Mishra, V., Nigam, A., Kumar, N., Mahewari, A., & Kushwaha, S. (2018). Experimental Investigation of Solar Room Heater for Commercial Purpose. International Journal of Engineering & Technology, 7(4.39), 718-721. https://doi.org/10.14419/ijet.v7i4.39.25587

    Received date: 2019-01-09

    Accepted date: 2019-01-09

    Published date: 2018-12-13