Numerical and Experimental Study the Effect of Solid Particles Flow on Heat Pipe Performance

  • Authors

    • Hafidh Hassan Al-Ghazali
    • Mohammed Wahhab. Aljibory
    • Taher Habeeb Alkharasani
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.30.25770
  • heat pipe, fluidization, particle bed
  • A numerical work supported by experimental results was carried out to studying of passing a hot solid particle on heat pipe performance. used Ansys fluent 18.0 as a computer program, geometry was published using design modular engaged in it. 3Dimention model with the steady state was studied to knowing the temperature distributed inside the evaporator and condenser part domain, more clearly to particle behavior and streamline 2Dimention model with transient was studied also. Depended on particle of 105µm diameter and experimental measuring properties set with height range (2.5 to 5) cm inside evaporator part from box, velocity with range (0.8739 to 1.377) m/s was take in consideration, the result shown enhancement in Nusselt number by (58) % when the velocity 1.377 m/s and particle bed height 5 cm compared with the first state, pressure drop with acceptable range was measured not exceed (42) %

     

     

     
  • References

    1. [1] A. Faghri, “Review and advances in heat pipe science and technology, ASME J. Heat Transfer 134 (2012) 123001. 1-18.â€

      [2] M. S. M. Groll, “V. Sartre, M.C. Zaghdoudi, M. Lallemand, Thermal control of electronic equipment by heat pipes, Revue Générale de Thermique 37 (5) (1998) 323–352.â€

      [3] B. R. H. H.N. Chaudhry, “S.A. Ghani, A review of heat pipe systems for heat recovery and renewable energy applications, Renew. Sustainable Energy Rev. 16 (2012) 2249–2259.â€

      [4] D. X. Yang, Y.Y. Yan, “Mullen, Recent developments of light weight, high performance heat pipes, Appl. Therm. Eng. 33–34 (2012) 1–14.â€

      [5] A. P. S. Kakaç, “Review of convective heat transfer enhancement with nanofluids, Int. J. Heat Mass Transfer 52 (2009) 3187–3196.â€

      [6] Y.-Y. L. Z.-H. Liu, “A new frontier of nanofluid research – Application of nanofluids in heat pipes, Int. J. Heat Mass Transfer 55 (2012) 6786–6797.â€

      [7] R. S. A. Kamyar, “M. Hasanuzzaman, Application of computational fluid dynamics (CFD) for nanofluids, Int. J. Heat Mass Transfer 55 (2012) 4104– 4115.â€

      [8] A. R. R. C.L. Tien, “Analyses of the effects of vapor pressure drop on heat pipe performance, Int. J. Heat Mass Transfer 17 (1974) 61–67.â€

      [9] A. F. M.-M. Chen, “An analysis of the vapor flow and the heat conduction through the liquid-wick and pipe wall in a heat pipe with single or multiple heat sources, Int. J. Heat Mass Transfer 33 (9) (1990) 194–195.â€

      [10] F. I. E.D. Huckaby, “I. Catton, Numerical simulation of heat pipe vapor dynamics using a collocation method, AIAA (1994) 0451.â€

      [11] B. W. J. Legierski, “G.D. Mey, Measurements and simulations of transient characteristics of heat pipes, Microelectr. Reliab. 46 (2006) 109–115.â€

      [12] A. F. B. Xiao, “A three-dimensional thermal-fluid analysis of flat heat pipes, Int. J. Heat Mass Transfer 51 (2008) 3113–3126.â€

      [13] V. B. M. Shafahi, “K. Vafai, O. Manca, An investigation of the thermal performance of cylindrical heat pipes using nanofluids, Int. J. Heat Mass Transfer 53 (2010) 376–383.â€

      [14] S. P. J. K.H. Do, H.J. Ha, “Thermal resistance of screen mesh wick heat pipes using the water-based Al2O3 nanofluids, Int. J. Heat Mass Transfer 53 (2010) 5888–5894.â€

      [15] H. . Vreedenburg, “‘Heat transfer between a fluidized bed and a horizontal tube,’ Chemical Eng. Science, Vol. 9, pp. 52-66, 1958.â€

      [16] Ainshtein, “I.G., ‘Hydrodynamics and heat transfer in fluidized beds,’ pp. 270- 272, Edited by Zabrodsky, S. S., M.I.T. press, Cambridge, 1966.â€

      [17] A. M. Salwe, “Local heat transfer coefficient around a horizontal heating element in gas-solid fluidized bed,†vol. 2, no. 6, pp. 344–348, 2013.

      [18] S. Lechner, M. Merzsch, and H. J. Krautz, “Heat-transfer from horizontal tube bundles into fluidized beds with Geldart A lignite particles,†Powder Technol., vol. 253, pp. 14–21, 2014.

      [19] Hafidh Hassan Mohammed Al-Ghazali, “INVESTIGATION OF HEAT TRANSFER IN GAS-SOLID CIRCULATING FLUIDIZED BED .phD full thesis.†2011.

      [20] Q. F. Hou, Z. Y. Zhou, and A. B. Yu, “Gas-solid flow and heat transfer in fluidized beds with tubes: Effects of material properties and tube array settings,†Powder Technol., vol. 296, pp. 59–71, 2016.

  • Downloads

  • How to Cite

    Hassan Al-Ghazali, H., Wahhab. Aljibory, M., & Habeeb Alkharasani, T. (2018). Numerical and Experimental Study the Effect of Solid Particles Flow on Heat Pipe Performance. International Journal of Engineering & Technology, 7(4.30), 502-508. https://doi.org/10.14419/ijet.v7i4.30.25770