Multi Objective Optimization for Turning Operation using Hybrid Extreme Learning Machine and Multi Objective Genetic Algorithm

  • Authors

    • Tiagrajah V. Janahiraman
    • Nooraziah Ahmad
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.35.26273
  • Turning operation, Multi objective Optimization Genetic Algorithm, Extreme Learning Machine, Box Behnken Design, Particle Swarm Optimization.
  • Turning operation, a type of machining process using Computer Numerical Control (CNC) machine in which a cutting tool, typically a non-rotary tool bit, moves to describe a helix toolpath while the cylindrical metal workpiece rotates. Numerous conflicting performance functions such as maximizing material removal rate, minimizing the product’s quality, maximizing the tool life and others, remains crucial for a system to optimize in order to obtain optimum benefit. The machinist is required to assign the optimal cutting parameters in CNC turning machine which have direct influence on the performance of each cutting process and machined product. It is very crucial for optimal parameters selection to maximize the performance function. A new optimisation model has been proposed in this paper. This model, uses Box Behnken Design (BBD) for design of experiment and the prediction model has been developed using Extreme Learning Machine (ELM) which is tuned using Particle Swarm Optimization. A powerful and effective, Multi Objective Genetic Algorithm (MOGA) will act as an optimizer of the developed model. Turning input parameters such as feed rate, cutting speed and depth of cut were considered as input variables and surface roughness, specific power consumption and cutting force were used as output variables. This novel approach, BBD-ELM-PSO-MOGA can predict the optimal cutting parameters as demonstrated in our case studies with less number of tunable parameters and number of experiments. Therefore, it is fast, less time consuming and easy to be implemented.

     

  • References

    1. [1] D. Baji´c, L. Celent, and S. Jozi´c, “Modeling of the influence of cutting parameters on the surface roughness, tool wear and the cutting force in face milling in off-line process control,†Strojniski vestnik-Journal of Mechanical Engineering, vol. 58, no. 11, p. 673, 2012.

      [2] S. Nes¸eli, S. Yaldız, and E. T¨urkes¸, “Optimization of tool geometry parameters for turning operations based on the response surface methodology,†Measurement, vol. 44, no. 3, pp. 580–587, 2011.

      [3] I. Asilt¨urk and H. Akkus¸, “Determining the effect of cutting parameters on surface roughness in hard turning using the taguchi method,†Measurement, vol. 44, no. 9, pp. 1697–1704, 2011.

      [4] C. Camposeco-Negrete, “Optimization of cutting parameters for minimizing energy consumption in turning of aisi 6061 t6 using taguchi methodology and anova,†Journal of Cleaner Production, vol. 53, pp. 195–203, 2013.

      [5] I. Mukherjee and P. K. Ray, “A review of optimization techniques in metal cutting processes,†Computers & Industrial Engineering, vol. 50, no. 1-2, pp. 15–34, 2006.

      [6] I. Asilt¨urk and S. Nes¸eli, “Multi response optimisation of cnc turning parameters via taguchi method-based response surface analysis,†Measurement, vol. 45, no. 4, pp. 785–794, 2012.

      [7] S. Yang and U. Natarajan, “Multi-objective optimization of cutting parameters in turning process using differential evolution and nondominated sorting genetic algorithm-ii approaches,†The International Journal of Advanced Manufacturing Technology, vol. 49, no. 5-8, pp. 773–784, 2010.

      [8] S. Xie and Y. Guo, “Intelligent selection of machining parameters in multi-pass turnings using a ga-based approach,†Journal of Computational Information Systems, vol. 7, no. 5, pp. 1714–1721, 2011.

      [9] R. Ramanujam, N. Muthukrishnan, and R. Raju, “Optimization of cutting parameters for turning al-sic (10p) mmc using anova and grey relational analysis,†International Journal of Precision Engineering and Manufacturing, vol. 12, no. 4, pp. 651–656, 2011.

      [10] S. K. Nayak, J. K. Patro, S. Dewangan, and S. Gangopadhyay, Multiobjective optimization of machining parameters during dry turning of aisi 304 austenitic stainless steel using grey relational analysis,†Procedia Materials Science, vol. 6, pp. 701–708, 2014.

      [11] M. Solimanpur and F. Ranjdoostfard, “Optimisation of cutting parameters using a multi-objective genetic algorithm,†International Journal of Production Research, vol. 47, no. 21, pp. 6019–6036, 2009.

      [12] R. A. Santana, M. R. Pontes, and C. J. Bastos-Filho, “A multiple objective particle swarm optimization approach using crowding distance and roulette wheel,†in Intelligent Systems Design and Applications, 2009. ISDA’09. Ninth International Conference on, pp. 237–242, IEEE, 2009.

      [13] D. Mandal, S. K. Pal, and P. Saha, “Modeling of electrical discharge machining process using back propagation neural network and multiobjective optimization using non-dominating sorting genetic algorithm ii,†Journal of Materials Processing Technology, vol. 186, no. 1-3, pp. 154–162, 2007.

      [14] Y. Yusoff, M. S. Ngadiman, and A. M. Zain, “Overview of nsga-ii for optimizing machining process parameters,†Procedia Engineering, vol. 15, pp. 3978–3983, 2011.

      [15] S. Kuriakose and M. Shunmugam, “Multi-objective optimization of wire-electro discharge machining process by non-dominated sorting genetic algorithm,†Journal of materials processing technology, vol. 170, no. 1-2, pp. 133–141, 2005.

      [16] R. Q. Sardinas, M. R. Santana, and E. A. Brindis, “Genetic algorithm based multi-objective optimization of cutting parameters in turning processes,†Engineering Applications of Artificial Intelligence, vol. 19, no. 2, pp. 127–133, 2006.

      [17] N. Ahmad and T. V. Janahiraman, “A study on regression model using response surface methodology,†Applied Mechanics and Materials, vol. 666, pp. 235–239, 2014.

      [18] Y. Xu and Y. Shu, “Evolutionary extreme learning machine–based on particle swarm optimization,†in International Symposium on Neural Networks, pp. 644–652, Springer, 2006.

      [19] C. Natarajan, S. Muthu, and P. Karuppuswamy, “Prediction and analysis of surface roughness characteristics of a non-ferrous material using ann in cnc turning,†The International Journal of Advanced Manufacturing Technology, vol. 57, no. 9-12, pp. 1043–1051, 2011.

      [20] N. Ahmad and T. V. Janahiraman, “Modelling and prediction of surface roughness and power consumption using parallel extreme learning machine based particle swarm optimization,†in Proceedings of ELM-2014 Volume 2, pp. 321–329, Springer, 2015.

      [21] J. Kennedy and R. Eberhart, “Particle swarm optimization. proc. ieee international conference on neural networks (perth australia),†in IEEE Service Center, Piscataway, NJ, IV, pp. 1942–1948.

  • Downloads

  • How to Cite

    V. Janahiraman, T., & Ahmad, N. (2018). Multi Objective Optimization for Turning Operation using Hybrid Extreme Learning Machine and Multi Objective Genetic Algorithm. International Journal of Engineering & Technology, 7(4.35), 876-879. https://doi.org/10.14419/ijet.v7i4.35.26273