Study of Vibration Pattern Recorded While Turning of EN8 and EN24 using MPU6050

  • Authors

    • Anurag Joshi
    • DD Shukla
    • Ravi Kumar Goyal
    2018-12-19
    https://doi.org/10.14419/ijet.v7i4.41.26766
  • Machine, Vibrations, Accelerometer.

  • The need for precise along with optimum measurement and result oriented investigation of mechanical vibration has grown and implemented in various mechanical operations. The method adopted to measure the vibration of a particular piece of machinery is by mounting an accelerometer and measuring the accelerations produced by the vibration. The primary agenda of this work is to assess and study the vibrations generated in the machine while doing machining EN8 and EN24 at different depth of cut. The experiment was performed by mounting a 3-axis accelerometer (MPU-6050) on the tool post of lathe machine (LDLM-02) switched to turning centre. The device was calibrated using Arduino software whose output signals were logged in Microsoft Excel which turned out as desired vibration levels.

     

     


     

  • References

    1. [1] A.B.Albrecht, “How to secure desired surface finish in turning operationsâ€, Am. Mach. (1956) 133-136.

      [2] K.L.Chandiramani and N.H. Cook, “Investigations into the nature of surface finish and its variation with cutting speedâ€, J.Eng. Ind, Ser.B, 86-87 (1964), pp. 134-140.

      [3] G.E. Dieter, Engineering Design: A Materialistic and Processing Approach, 2nd ed, Mcgraw-Hill, Inc., New Delhi, 1991.

      [4] R. Azouzi, M.Guillot, “On-line optimization of turning process using an inverse process Neuro controllerâ€, J. Manuf. Sci. Eng., 120 (1998), pp. 101-108.

      [5] Jardine, J.,T., & Banjevic, “Optimizing condition-based maintenance decisions for equipment subject to vibration monitoringâ€. Journal of Quality in maintenance Engineering, 5(3), 2002, 192-202.

      [6] C. X. Feng and X. Wang, “Development of empirical models for surface roughness prediction in finish turning,†International Journal of Advanced Manufacturing Technology, Vol. 20, 2002, pp. 348-356.

      [7] S.M. Darwish, “The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel superalloy,†Journal of Materials Processing Technology, Vol. 97, 2000, pp. 10-18.

      [8] W. Chen, “Cutting forces and surface finish when machining medium hardness steel using CBN tools,†International Journal of Machine Tools Manufacturing, vol. 40, 2000, pp. 455-466

      [9] https://www.invensense.com/wp-content/uploads/2015/02/MPU-6000-Datasheet1.pdf

  • Downloads

  • How to Cite

    Joshi, A., Shukla, D., & Goyal, R. K. (2018). Study of Vibration Pattern Recorded While Turning of EN8 and EN24 using MPU6050. International Journal of Engineering & Technology, 7(4.41), 234-237. https://doi.org/10.14419/ijet.v7i4.41.26766