Investigation of the Resistance of Protective Plates of High-Strength Concrete with Dynamic Impact

  • Authors

    • Yevgenij Babych
    • Sergij Filipchuk
    • Yevgen Babich
    • Roman Pahomov
    2018-10-13
    https://doi.org/10.14419/ijet.v7i4.8.27234
  • strength, steel, concrete, dynamic impact.

  • Abstract

    In the article are given the results of the test of dynamic action of protective steel-reinforced concrete slabs. The results have been confirmed, and proved the feasibility and expediency of application for their manufacture of high-strength fast-hardening concretes. Using external damper blades for supporting the slabs allows to absorb the energy of the impact of the weapon up to 30%  , which increases their overall resistance to dynamic influences. The use of high-strength concrete will reduce the thickness of the plates in 2 ... 3 times compared with the concrete of conventional classes.

     

     

  • References

    1. [1] Bazhenov Yu.M. Beton pry dynamycheskom nahruzhenyy. M.: Stroiyzdat, 1970, 274 s.

      [2] Belov N.N. Raschet zhelezobetonnykh konstruktsyi na vzryvnye y udarnye nahruzky. / Belov N.N., Kopanytsa D.H., Kumpliak O.H., Yuhov N.T. // Tomsk: STT, 2004. 466 s. ISBN 5-93629-183-9.

      [3] Dvorkіn L.J., Babich E.M., ZHitkovs'kij V.V., Bordyuzhenko O.M., Fіlіpchuk S.V.,Kochkar'ov D.V., Kovalik І.V., Koval'chuk T.V., Skripnik M.M. Visokomіcnі shvidkotverdnuchі betoni ta fіbro betoni – Rіvne: NUVGP, 2017. 331 s.

      [4] Kumpliak O.H. , Kopanytsa D.H. Prochnost y deformatyvnost zhelezobetonnыkh sooruzhenyi pry kratkovremennom dynamycheskom nahruzhenyy. Tomsk: STT, 2002. 336 s.

      [5] Babych, E.M., Andriichuk, O.V. Strength of Elements with Annular Cross Sections Made of Steel-fiber-Reinforced Concrete Under One-Time Loads Materials Science vol. 52 (4), pp. 509-513, 2017

      [6] Lyubchenko, I.G., Babich, E.M., Babich, V.I., Pershakov, V.N. Steel-Concrete Trusses for Rural Construction. | [STALEZHELEZOBETONNYE FERMY DLYA SEL'SKOGO STROITEL'STVA.] Beton i Zhelezobeton. vol. 7, pp. 5-7 1976.

      [7] Hakan Hansson. Warhead penetration in concrete protective structures. Licentiate Thesis. – Stockholm, 2011. – 188 Ñ.

      [8] Kufuor K.G., Perry S.H. Hard impact of shallow reinforced concrete domes. Int. Conf. Structural Impact and Crashwortiness: Int. Conf. - V.2. - London, 1984. - P.675-686.

      [9] Wang S., Zhang M., Quek T. Compressive behavior of plain and fiber-reinforced high-strength concrete subjected to high strain rate loading // Applied Mechanics and Materials Vol. 82 (2011). P. 57-62.

      [10] GOST 10180-90. Betony. Metody opredelenyia prochnosty po kontrolnym obraztsam.– M. : NYYZhB Hosstroia SSSR, 1991. – 31 s.

      [11] GOST 24452-80. Betony. Metody opredelenyia pryzmennoi prochnosty, modulia upruhosty y koeffytsyenta Puassona.– M. : NYYZhB Hosstroia SSSR, 1980. – 14 s.

      [12] DSTU B V.2.7– 214:2009. Budivelni materialy. Betony. Metody vyznachennia mitsnosti za kontrolnymy zrazkamy. – K. Minrehionbud, 2010. – 31 s.

      [13] Mekhanіchnі harakteristiki shvidkotverdnuchih visokomіcnih betonіv. / Є.M. Babich, V.Є. Babich, S.V. Fіlіpchuk, D.V. Kochkar'ov // Resursoekonomnі materіali, konstrukcії, budіvlі ta sporudi: Zbіrnik naukovih prac'. – Rіvne: NUVGP, 2016. – Vipusk 32. – S. 114 –120.

      [14] Babych, Y., Filipchuk, S., Fenko, O., “Mathematical modeling of the resistance of pulling out steel bars from high strength concrete,â€International Journal of Engineering and Technology (UAE), vol. 7 (3.2), pp. 516-521, May 2018.

      [15] Babych Ye.M., Kochkarov D.V., Filipchuk S.V.. Otsiniuvannia mitsnisnykh i deformatsiinykh kharakterystyk vysokomitsnykh betoniv pry dynamichnykh vplyvakh. â€Nauka ta budivnytstvo†Zhurnal – Kyiv: NDIBK, 2017. – â„– 4. – S. 15 –21.

      [16] Piskunov, V. G., Goryk, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads. 1. construction of a model.Mechanics of Composite Materials, 36(4), 287-296. doi:10.1007/BF02262807

      [17] Piskunov, V. G., Gorik, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads 2. resolving equations and results. Mechanics of Composite Materials, 36(6), 445-452. https://doi.org/10.1023/A:1006798314569

      [18] Kochkarev, D., Galinska, T., & Tkachuk, O. (2018). Normal sections calculation of bending reinforced concrete and fiber concrete element. International Journal of Engineering and Technology(UAE), 7(3), 176-182. http://dx.doi.org/10.14419/ijet.v7i3.2.14399

      [19] Kochkarev, D., & Galinska, T. (2017). Calculation methodology of reinforced concrete elements based on calculated resistance of reinforced concrete. Paper presented at the MATEC Web of Conferences, 116 https://doi.org/10.1051/matecconf/201711602020

      [20] Kochkarev, D., Azizov T., & Galinska, T. (2018) Bending deflection reinforced concrete elements determination. Paper presented at the MATEC Web of Conferences, 230 https://doi.org/10.1051/matecconf/201823002012

      [21] Kochkarev, D., & Galinska, T. (2018). Nonlinear Calculations of the Strength of Cross-sections of Bending Reinforced Concrete Elements and Their Practical Realization. Cement Based Materials, 13-30 http://dx.doi.org/10.5772/intechopen.75122

  • Downloads

  • How to Cite

    Babych, Y., Filipchuk, S., Babich, Y., & Pahomov, R. (2018). Investigation of the Resistance of Protective Plates of High-Strength Concrete with Dynamic Impact. International Journal of Engineering & Technology, 7(4.8), 168-173. https://doi.org/10.14419/ijet.v7i4.8.27234

    Received date: 2019-02-11

    Accepted date: 2019-02-11

    Published date: 2018-10-13