Oil and Gas Storage Facilities Construction Operations Standardization

  • Authors

    • Victor Bondar
    • Liudmyla Bondar
    • Oleksandr Petrash
    • Nataliia Popovych
    2018-10-13
    https://doi.org/10.14419/ijet.v7i4.8.27237
  • cement, clay, cost rates, drilling, deep soil mixing technology, geotechnical conditions, loess loam, labor, photo-fixation, reinforced soilcement pile, soil, time, vertical oil tank.

  • Abstract

    This is the first research that provides the calculation of time and labor standards for foundation works at oil and gas storage facilities construction. A foundation works performance for two identical vertical steel tanks is under investigation. The reinforced soil-cement piles are suggested as the most economical way of foundation works performance at gas and oil storage facilities The deep soil mixing technology is considered. The detailed description of suggested technology is presented along with time spent for each technological element. This paper provides data on the machinery and materials needed for construction. A time study method was applied to compile a working day photo-fixation. The obtained data were processed using the method suggested by engineer Prussak. The nonlinear correlation of drilling time versus depth of reinforced soil cement piles was obtained. The influence of geotechnical conditions on time and labor consumption is presented. Time and labor standards for manufacturing 1 m3 of soil-cement piles have been calculated.

     

     


     

  • References

    1. [1] Daniel Ribeiro, Raquel Néri, Rafaela Cardoso, â€Influence of Water Content in the UCS of Soil-Cement Mixtures for Different Cement Dosagesâ€, Procedia Engineering, Vol.143, (2016), pp.59-66,
      https://doi.org/10.1016/j.proeng.2016.06.008

      [2] Ahmad Safuan A. Rashid, Jonathan A. Black, Ahmad Beng Hong Kueh, Norhazilan Md Noor, â€Behaviour of weak soils reinforced with soil cement columns formed by the deep mixing method: Rigid and flexible footingsâ€, Measurement, Vol.68, (2015). pp.262–279, https://doi.org/10.1016/j.measurement.2015.02.039

      [3] Zotsenko M.L., Soil-Cement Piles Manufactured by Deep Soil Mixing Technology, Typografyya Madrid, (2016), pp:12–89. http://reposit.pntu.edu.ua/handle/PoltNTU/2062

      [4] Xiao-nan Gong, Xiao-jun Tian, Wen-tao Hu, â€Simplified method for predicating consolidation settlement of soft ground improved by floating soil-cement columnâ€, Journal of Central South University, Vol.22, No.7, (2015), pp.2699–2706,
      https://doi.org/10.1007/s11771-015-2800-7

      [5] DSTU B V.2.7-187:2009 Budivelni materialy. Tsementy. Metody vyznachennia mitsnosti na zhyn i stysk.

      [6] DSTU ISO 3696:2003 Voda dlia zastosuvannia v laboratoriiakh. Vymohy ta metody pereviriannia (ISO 3696:1987, IDT)

      [7] DSTU B V.2.7-239:2010. Rozchyny budivelni. Metody vy-probuvan (EN 1015-11:1999, NEQ).

      [8] N. L. Zotsenko, Yu. L. Vinnikov, â€Long-Term Settlement of Buildings Erected on Driven Cast-In-Situ Piles in Loess Soilâ€, Soil Mechanics and Foundation Engineering, Vol.53, No.3, (2016), pp.189–195, https://doi.org/10.1007/s11204-016-9384-6

      [9] N. L. Zotsenko, N. I. Lapin, R. V. Petrash, â€Comparative effectiveness of bed reinforcement based on plate tests and mathematical modelingâ€, Soil Mechanics and Foundation Engineering, Vol.45, No.4, (2008), pp.138–143, https://doi.org/10.1007/s11204-008-9014-z

      [10] Shakti Suman, Mahasakti Mahamaya, Sarat Kumar Das, â€Prediction of Maximum Dry Density and Unconfined Compressive Strength of Cement Stabilised Soil Using Artificial Intelligence Techniquesâ€, International Journal of Geosynthetics and Ground Engineering, Vol.2, No.2, (2016), pp.1–11, https://doi.org/10.1007/s40891-016-0051-9

      [11] Popova, A.V., Kremenetsky, V.G., Solov'ev, V.V., Chernenko, L.A., Kremenetskaya, O.V., Fofanov, A.D., Kuznetsov, S.A., â€Standard rate constants of charge transfer for Nb(V)/Nb(IV) redox couple in chloride-fluoride melts: Experimental and calculation methodsâ€, Russian Journal of Electrochemistry, Vol.46, No.6, (2010), pp.671-679, doi: 10.1134/S1023193510060121

      [12] Victor Bondar, Volodymyr Shulgin, Oksana Demchenko, Ludmila Bondar, â€Experimental study of properties of heavy concrete with bottom ash from power stationsâ€, MATEC Web of Conferences, Vol.116, No.02007, (2017). DOI: 10.1051/matecconf/20171160200 Transbud-2017 (Scopus) https://www.matec-conferences.org/ articles/matecconf/pdf/2017/30/matecconf_trs2017_02007.pdf

      [13] Chau K. Numerical Methods / K. Chau // Proc. of the 18th Intern. Conf. on Soil Mechanics and Geotechnical Engineering. – Paris. – 2013, 647 – 654.

      [14] Loburets, A. T., Naumovets, A. G., Senenko, N. B., & Vedula, Y. S. (1997). Surface diffusion and phase transitions in strontium overlayers on W(112). Zeitschrift Fur Physikalische Chemie, 202(1-2), 75-85.

      [15] Zotsenko N. Designing the compacted subsoil’s using mathematical simulation method / N. Zotsenko, Yu. Vynnykov // Active Geotechnical Design in Infrastructure Development. – Proc. of the XIIIth Danube-European Conf. on Geotechnical Engineering. Vol. 2. – Ljubljana, 2006, 385 – 390.

      [16] Zotsenko M. Modern practice of determination of strength characteristics of cohesive soils by penetration methods / M. Zotsenko, Yu. Vynnykov, A. Yakovlev // Proc. of XIVth Danube – European Conf. on Geotechnical Eng. – Bratislava: Slovak University of Technology. – 2010, 245 – 253.

      [17] Zotsenko, M., Vynnykov, Y., Doubrovsky, M., Oganesyan, V., Shokarev, V., Syedin, V., Meshcheryakov, G. (2013). Innovative solutions in the field of geotechnical construction and coastal geotechnical engineering under difficult engineering-geological conditions of ukraine. Paper presented at the 18th International Conference on Soil Mechanics and Geotechnical Engineering: Challenges and Innovations in Geotechnics, ICSMGE 2013, , 32645-2648.

      [18] Kochkarev, D., & Galinska, T. (2017). Calculation methodology of reinforced concrete elements based on calculated resistance of reinforced concrete. Paper presented at the MATEC Web of Conferences, 116 https://doi.org/10.1051/matecconf/201711602020

      [19] Kochkarev, D., Azizov T., & Galinska, T. (2018) Bending deflection reinforced concrete elements determination. Paper presented at the MATEC Web of Conferences, 230 https://doi.org/10.1051/matecconf/201823002012

      [20] Storozhenko, L., Butsky, V., & Taranovsky, O. (1998). Stability of compressed steel concrete composite tubular columns with centrifuged cores. Journal of Constructional Steel Research, 46(1-3), 484. http://dx.doi.org/10.1016/S0143-974X(98)80098-9

      [21] Piskunov, V. G., Goryk, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads. 1. construction of a model.Mechanics of Composite Materials, 36(4), 287-296. doi:10.1007/BF0226280

      7

  • Downloads

  • How to Cite

    Bondar, V., Bondar, L., Petrash, O., & Popovych, N. (2018). Oil and Gas Storage Facilities Construction Operations Standardization. International Journal of Engineering & Technology, 7(4.8), 180-184. https://doi.org/10.14419/ijet.v7i4.8.27237

    Received date: 2019-02-11

    Accepted date: 2019-02-11

    Published date: 2018-10-13