Experimental investigation on mechanical behaviour and parameters of FDM printed carbon fibre reinforced PET-G and PET-G

  • Authors

    • Kareem Dakhil Jasym AL-QADISSIYA UNIVERSITY COLLEGE OF ENGINEERING
    2019-09-04
    https://doi.org/10.14419/ijet.v8i3.27327
  • 3D printing, Biodegradable Polymers, Fabrication, FDM, PET-G, Testing.
  • In present study tests like Tensile, Compression and Flexural on the 3D Printed standard specimens of PETG and CARBON FIBER REINFORCED is carried on PETG by changing the printing parameters to find their mechanical properties by using FDM. The experimental results indicated that the tensile strength of carbon fiber reinforced pet-G is 1.28% higher than pure PET-G sample. Its optimum value is observed from Taguchi L9 to be 30.804 from SN curve and same as 34.629 in MEAN curve. The variation in the two values is noticed to be 12.12 % for SN curve and 0 % in case of MEANS Carbon fiber PET-G specimen with 300µ layer thickness, 80% infill density, 60 mm/sec print speed had the largest mean value of tensile strength. The ultimate tensile strength of fabricated specimen with 300µ layer thickness, 80% infill density, and 60 mm/sec print speed could increase 1.28% when compared with pure PET-G specimen.

     

     

  • References

    1. [1] Alizadeh-Osgouei M, Li Y, Wen C. A comprehensive review of biodegradable synthetic polymer-ceramic composites and their manufacture for biomedical applications. Bioact Mater. 2018; 4(1):22-36. Published 2018 Nov 27. https://doi.org/10.1016/j.bioactmat.2018.11.003.

      [2] Yan X, Gu P (1996) A review of rapid prototyping technologies and systems. Comput Aided Des 28(4):307–318 https://doi.org/10.1016/0010-4485(95)00035-6.

      [3] Hopkinson, N & Dickens, P 2006, 'Emerging Rapid Manufacturing Processes', in Rapid Manufacturing; An industrial revolution for the digital age, Wiley & Sons Ltd, Chichester, W. Sussex. https://doi.org/10.1002/0470033991.ch5.

      [4] Hutmacher, D.W., Schantz, T., Zein, I., Ng, K.W., Teoh, S.H. and Tan, K.C. (2001), “Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modelling â€, Journal of Biomedical Materials Research: Part A , Vol. 55 No. 2, pp. 203â€16. https://doi.org/10.1002/1097-4636(200105)55:2<203::AID-JBM1007>3.3.CO;2-Z.

      [5] Ahn SH, Montero M, Odell D, Roundy S, Wright PK (2002) Anisotropic material properties of fused deposition modeling ABS. Rapid Prototyp J 8(4):248–257. https://doi.org/10.1108/13552540210441166.

      [6] Matsuzaki R, Ueda M, Namiki M, et al. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci Rep. 2016; 6:23058. https://doi.org/10.1038/srep23058.

      [7] Published 2016 Mar 11. https://doi.org/10.1038/srep23058.

      [8] K. I. Mori, T. Maeno, and Y. Nakagawa, "Dieless forming of carbon fibre reinforced plastic parts using 3D printer," in Pr ocedia Engineering, 2014, pp. 1595-1600. https://doi.org/10.1016/j.proeng.2014.10.196.

      [9] B.E.Fischer, and H.Sigel, J.Am.Chem.Soc., 102(9) (1980) 2998-3008 . https://doi.org/10.1021/ja00529a021.

      [10] Hague R, Mansour S, and Saleh N, 2004, “Material and design considerations for rapid manufacturingâ€, International Journal of Production Research. https://doi.org/10.1080/00207840410001733940.

      [11] Bitzer, T., “Honeycomb Technology: Materials, Design, Manufacturing, Applications and Testing,†Springer, 1997. [11] John K Borchardt Unmanned aerial vehicles spur composites use Reinforced Plastics, Volume 48, Issue 4, April 2004, Pages 28-31 https://doi.org/10.1016/S0034-3617(04)00194-8.

      [12] Z Zhou, D Li, J Zeng and Z Zhang, Rapid fabrication of metal-coated composite stereo lithography parts, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (2007), Vol. 221, pp.1431-1440. https://doi.org/10.1243/09544054JEM827.

      [13] Kuo Y, Yang T, Huang GW (2008) the use of grey-based Taguchi method to optimize multi-response simulation problems. Eng Optim 40(6):517– 528 https://doi.org/10.1080/03052150701857645.

      [14] Minitab Statistical Software Features – Minitab." Software for Statistics, Process Improvement, Six Sigma, Quality – Minitab. N.p., n.d. Web. 11 Apr. 2011.

  • Downloads

  • How to Cite

    Dakhil Jasym, K. (2019). Experimental investigation on mechanical behaviour and parameters of FDM printed carbon fibre reinforced PET-G and PET-G. International Journal of Engineering & Technology, 8(3), 295-301. https://doi.org/10.14419/ijet.v8i3.27327