Studying Kinematics and Capacity of Tools of Organic Fertilizer Loader

  • Authors

    • Evgeny Evgenievich Demin
    • Pavel Ivanovich Pavlov
    • Rustam Rafitovich Khakimzyanov
    • Victor Alekseevich Mukhio
    • Andrey Anatolyevich Protasov
    2018-12-03
    https://doi.org/10.14419/ijet.v7i4.38.27651
  • Continuous Loaders, Capacity, Load Handling Tool, Spiral Feeder, Vane Feeder, Shredding Screw Feeder.
  • This article discusses the issue of theoretical background of capacity of new load handling tools of continuous loaders for organic fertilizers on the basis of kinematic analysis of their motion. Loader efficiency is estimated by a set of performances the main of which is loading capacity. The loading capacity is determined by design and kinematic parameters of tools. Theoretical determination of capacity is an important scientific task, its solution would permit to substantiate loader parameters for predetermined operation conditions. Kinematic analysis of spiral, vane, shredding screw load handling tools is performed. Capacity of shredding tools is determined as a function of design and operation parameters as well as physicochemical properties of organic fertilizers. The obtained equations take into account motion pattern of tools, kinematic and design parameters as well as physicochemical properties of manure. The capacity depends quadratically on tool diameter. Dependence on other parameters is in fact directly proportional. The influence of tool angular velocity and its forward velocity is related with trigonometric functions of rotation angles during separation and gripping of organic fertilizers.

     

     

  • References

    1. [1] Marchenko NM (1991), Tekhnologiya i tekhnicheskie sredstva dlya vneseniya organicheskikh udobrenii [Technology and tools for fertilizer treatment]. Moscow: Rosagropromizdat.

      [2] Vasil'ev VA, Filippova NV (1988), Spravochnik po organicheskim udobreniyam [Organic fertilizers. Guidebook]. Moscow: Rosagropromizdat.

      [3] Pavlov PI (2002), R&D solutions of resource saving upon operation continuous manure loader: Doctoral thesis: 05.20.01. Saratov.

      [4] Pavlov PI, Dzyuban IL (2014), Rezul'taty issledovanii proizvoditel'nosti pogruzchika-smesitelya organomineral'nogo komposta [Studying capacity of loader-mixer of organic mineral compost]. Vestnik Saratovskogo gosagrouniversiteta im. N.I. Vavilova, 7, 35–37.

      [5] Kononov BV, Volkov YuI, Pavlov PI (1992), Spiral feeder, Authors certificate â„– 1740292. Byull, 22.

      [6] Pavlov PI, Khitrova NV (1997), Shredding spiral feeder, RF patent â„– 2083463, Byull, 19.

      [7] Dubinin VF, Pavlov PI (1997), Vane feeder, RF patent â„– 2071234. Byull, 1.

      [8] Pavlov PI, Dyomin EE, Khakimzyanov RR (2006), Pitatel' frezeruyushchego tipa dlya pogruzki organicheskikh udobrenii [Shredding feeder for loading of organic fertilizers]. Vestnik Saratovskogo gosagrouniversiteta im. N. I. Vavilova, 3, 31–34.

      [9] Piskunov NS (1978), Differentsial'noe i integral'noe ischislenie dlya vuzov [Differential and integral calculations for higher schools]. Moscow: Nauka.

      [10] Il'in VA (1980), Sadovnichii, Matematicheskii analiz [Mathematical analysis]. Moscow: Nauka.

      [11] Demin EE (2007), Improvement of technological processes and manure loading tools: Doctoral thesis. Saratov.

      [12] Dubinin VF, Pavlov PI, Khitrova NV (2000), Shnekofrezernyi pitatel' pogruzchika organicheskikh udobrenii [Shredding screw loader of organic fertilizer]. Traktory i sel'skokhozyaistvennye mashiny, 10, 14–15.

      [13] Pavlov PI, Khakimzyanov RR (2001), Pogruzchik organicheskikh udobrenii [Loader of organic fertilizers]. Sel'skii mekhanizator, 2, 48.

  • Downloads

  • How to Cite

    Evgenievich Demin, E., Ivanovich Pavlov, P., Rafitovich Khakimzyanov, R., Alekseevich Mukhio, V., & Anatolyevich Protasov, A. (2018). Studying Kinematics and Capacity of Tools of Organic Fertilizer Loader. International Journal of Engineering & Technology, 7(4.38), 1109-1111. https://doi.org/10.14419/ijet.v7i4.38.27651