Using Waste from Food Cans as Electrode in Electrocoagulation for Wastewater Treatment

  • Authors

    • Chanchanok Soonsorn
    • Kulyakorn Khuanmar
    • Surapol Padungthon
    • Panomchai Weerayutsil
    2018-12-03
    https://doi.org/10.14419/ijet.v7i4.38.27877
  • Electrocoagulation, Aluminium electrode, Electrode from metal waste, COD removal

  • Abstract

    Wastes from soda and milk cans which contain metals can be used as electrode in Electrocoagulation (EC) technique. The study used wastewater from dyeing and finishing process of textile factory. Both the electrodes made from soda cans and milk cans were compared to the conventional electrodes made from aluminium sheet. Characterization of aluminium (Al) element in electrode showed 67.28% in aluminium sheets, 4.99% in soda cans, and 0% in milk cans. Nevertheless, only milk cans contain iron (Fe) and tin (Sn) at 45.87% and 23.87%, respectively. Based on treatment efficiency in COD removal from the real wastewater, it turned out that the highest efficiency was from aluminium sheets, at 83.57%, whereas soda-can electrodes and milk-can electrodes were 80.71% and 71.14%, respectively. This could result from the fact that soda-can electrodes contain high percentage of aluminium while milk-can electrodes have no aluminium, leading to its low efficiency. Although Fe in milk can function as electrodes, the efficiency cannot be compared to electrodes made from soda cans. Therefore, soda cans make an efficient material for electrodes because of its high percentage of aluminium. Analysis of SEM images demonstrated compactly agglomerated sludge from aluminium electrodes and soda-can electrodes. The image from testing milk can material demonstrated in contrast loosely agglomerated sludge. It can be concluded that the use of electrodes containing aluminium produces relatively more effective sedimentation.     

     

     

  • References

    1. Akanksha, G. B. Roopashree, and K. S. Lokesh, “Comparative study of electrode material (iron, aluminium and stainless steel) for treatment of textile industry wastewater,†Int. J. Environ. Sci., vol. 4, no. 4, pp. 519–531, 2013.

      [2] M. Khairul, N. Mahmad, M. Remy, M. A. Z. Rozainy, and I. Abustan, “Electrocoagulation Process by Using Aluminium and Stainless Steel Electrodes to Treat Total Chromium , Colour and Turbidity,†Procedia Chem., vol. 19, pp. 681–686, 2016.

      [3] M. Cha, B. Gourich, A. H. Essadki, C. Vial, and A. Fabregat, “Comparison of electrocoagulation using iron and aluminium electrodes with chemical coagulation for the removal of a highly soluble acid dye,†Desalination., vol. 281, pp. 285–292, 2011.

      [4] C. An, G. Huang, Y. Yao, and S. Zhao, “Science of the Total Environment Emerging usage of electrocoagulation technology for oil removal from wastewater : A review,†Sci. Total Environ., vol. 579, pp. 537–556, 2017.

      [5] A. Aleboyeh, N. Daneshvar, and M. B. Kasiri, “Optimization of C . I . Acid Red 14 azo dye removal by electro coagulation batch process with response surface methodology,†Chemical Engineering and Processing: Process Intensification., vol. 47, pp. 827–832, 2008.

      [6] E. Nariyan, A. Aghababaei, and M. Sillanpää, “Removal of pharmaceutical from water with an electrocoagulation process ; effect of various parameters and studies of isotherm and kinetic,†Sep. Purif. Technol., vol. 188, pp. 266–281, 2017.

      [7] S. Camcioglu, B. Ozyurt, and H. Hapoglu, “Effect of process control on optimization of pulp and paper mill wastewater treatment by electro coagulation,†Process Saf. Environ. Prot., vol. 111, pp. 300–319, 2017.

      [8] D. Franco, J. Lee, S. Arbelaez, N. Cohen, and J. Kim, “Removal of phosphate from surface and wastewater via electrocoagulation,†Ecol. Eng., vol. 108, no. March, pp. 589–596, 2017.

      [9] M. Solak and M. Kılıc, “Removal of suspended solids and turbidity from marble processing wastewaters by electrocoagulation : Comparison of electrode materials and electrode connection systems,†Jurnal of Hazardous Material., vol. 172, pp. 345–352, 2009.

      [10] A. S. Naje, S. Chelliapan, Z. Zakaria, and S. A. Abbas, “Enhancement of an Electrocoagulation Process for the Treatment of Textile Wastewater under Combined Electrical Connections Using Titanium Plates,†Int. J. Electrochem. Sci., vol. 10, pp. 4495–4512, 2015.

      [11] O. T. Can, M. Bayramoglu, and M. Kobya, “Decolorization of reactive dye solutions by electrocoagulation using aluminum electrodes,†Ind. Eng. Chem. Res., vol. 42, no. 14, pp. 3391–3396.

  • Downloads

  • How to Cite

    Soonsorn, C., Khuanmar, K., Padungthon, S., & Weerayutsil, P. (2018). Using Waste from Food Cans as Electrode in Electrocoagulation for Wastewater Treatment. International Journal of Engineering & Technology, 7(4.38), 1372-1375. https://doi.org/10.14419/ijet.v7i4.38.27877

    Received date: 2019-02-24

    Accepted date: 2019-02-24

    Published date: 2018-12-03