Statistical Method for Tracing Hydraulic Fracture Front Without Evaluation of the Normal

  • Authors

    • A. D. Stepanov
    2018-11-30
    https://doi.org/10.14419/ijet.v7i4.26.27936
  • hydraulic fracturing, front propagation, statistical approach

  • Abstract

    In numerical simulation of hydraulic fracture propagation, tangent component of the fluid velocity generally considered to be neglected near the crack front. Then Reynolds transport theorem yields that the limit of the particle velocity coincides with the vector of the front propagation speed. We use this fact in combination with the Poiseuille-type equation, which implies that the particle velocity is always collinear to pressure gradient. We show that this specific feature of the hydraulic fracture problem may serve to simplify tracing the front propagation. The latter may be traced without explicit evaluation of the normal to the front, which is needed in conventional applications of the theory of propagating interfaces. Numerical experiments confirm that, despite huge errors in pressure and even greater errors in its gradient, the propagation speed, statistically averaged over a distance of a mesh size, is found quite accurate. We conclude that suggested method may simplify numerical simulation of hydraulic fractures driven by Newtonian and non-Newtonian fluids.

     

  • References

    1. [1] Peirce, A., E. Detournay, E. (2008). Comput. Methods Appl. Mech. Engng., 197, 33.

      [2] Sethian, J. A. (1999). Level set methods and fast marching methods: evolving interfaces in computational geometry, fluid mechanics, computer vision, and materials science (Vol. 3). Cambridge university press.

      [3] Adachi, J., & Siebrits, E. (2007). Peirce A and Desroches J. Computer simulation of hydraulic fractures. Int J Rock Mech Min Sci, 44(5), 739-57.

      [4] Linkov, A. M. (2015). The particle velocity, speed equation and universal asymptotics for the efficient modelling of hydraulic fractures. Journal of Applied Mathematics and Mechanics, 79(1), 54-63.

      [5] Khristianovic, S., & Zheltov, Y. (1955, June). Formation of vertical fractures by means of highly viscous fluids. In Proc. 4th world petroleum congress, Rome (Vol. 2, pp. 579-586).

      [6] Geertsma, J., & De Klerk, F. (1969). A rapid method of predicting width and extent of hydraulically induced fractures. Journal of Petroleum Technology, 21(12), 1-571.

      [7] Adachi, J. I., & Detournay, E. (2002). Selfâ€similar solution of a planeâ€strain fracture driven by a powerâ€law fluid. International Journal for Numerical and Analytical Methods in Geomechanics, 26(6), 579-604.

      [8] Linkov, A. M. (2012). On efficient simulation of hydraulic fracturing in terms of particle velocity. International Journal of Engineering Science, 52, 77-88.

      [9] Savitski, A. A., & Detournay, E. (2002). Propagation of a penny-shaped fluid-driven fracture in an impermeable rock: asymptotic solutions. International Journal of Solids and Structures, 39(26), 6311-6337.

      [10] Linkov, A. (2018). On relative input of viscous shear into the elasticity equation at near-front, near-inlet and the major part of a hydraulic fracture. arXiv preprint arXiv:1808.05533.

      [11] Dontsov, E. V., & Peirce, A. P. (2016). Comparison of toughness propagation criteria for blade-like and pseudo-3D hydraulic fractures. Engineering Fracture Mechanics, 160, 238-247.

      [12] Linkov, A. M. (2016). Numerical solution of plane hydrofracture problem in modified formulation under arbitrary initial conditions. Journal of Mining Science, 52(2), 265-273.

      [13] Mighani, S., Lockner, D. A., Kilgore, B. D., & Evans, B. (2018, August). Role of Fault Gouge during Interaction between Hydraulic Fracture and a Preexisting Fracture. In 52nd US Rock Mechanics/Geomechanics Symposium. American Rock Mechanics Association.

      [14] Casares, L., Vincent, R., Zalvidea, D., Campillo, N., Navajas, D., Arroyo, M., & Trepat, X. (2015). Hydraulic fracture during epithelial stretching. Nature materials, 14(3), 343.

      [15] Wills, P. B., Karam, S. G., Mestayer, J. J., Ugueto, G. A., & Lopez, J. L. (2016). U.S. Patent No. 9,347,313. Washington, DC: U.S. Patent and Trademark Office.

      [16] Wu, K., & Olson, J. E. (2016). Numerical investigation of complex hydraulic-fracture development in naturally fractured reservoirs. SPE production & operations, 31(04), 300-309.

      [17] McClure, M. W., Babazadeh, M., Shiozawa, S., & Huang, J. (2016). Fully coupled hydromechanical simulation of hydraulic fracturing in 3D discrete-fracture networks. SPE Journal, 21(04), 1-302.

      [18] Shakiba, M., & Sepehrnoori, K. (2015, September). Using embedded discrete fracture model (EDFM) and microseismic monitoring data to characterize the complex hydraulic fracture networks. In SPE annual technical conference and exhibition. Society of Petroleum Engineers.

  • Downloads

  • How to Cite

    D. Stepanov, A. (2018). Statistical Method for Tracing Hydraulic Fracture Front Without Evaluation of the Normal. International Journal of Engineering & Technology, 7(4.26), 274-278. https://doi.org/10.14419/ijet.v7i4.26.27936

    Received date: 2019-02-25

    Accepted date: 2019-02-25

    Published date: 2018-11-30