A survey on power and load-aware multipath node-disjoint routing protocol for MANET

  • Authors

    • Sathishkumar Kumar. S Department of Electronics & Communication Engineering, Jayalakshmi Institute of Technology, Dharmapuri, Tamilnadu
    • Ravi G Department of Electronics & Communication Engineering, Sona College of Technology, Salem, Tamilnadu
    2019-04-03
    https://doi.org/10.14419/ijet.v7i4.28111
  • MANET, Power-Aware Routing, Load-Aware Routing, Link Failure, Energy Consumption, Network Lifetime.
  • In Mobile Ad-hoc Network (MANET), the most challenging task is communication through multipath routing. Generally, each node in the network may have limited power resources to communicate with the other nodes without any backbone structures. So, an unbalanced traffic allocation among nodes may cause power dissipation in overloaded nodes. Due to this, path failure has occurred that degrades the network lifetime and its performance. As a result, power and load-aware multipath routing protocols have been proposed to reduce the energy consumption and link failure in the network. Hence, a multipath routing scheme is the most crucial in MANET to transmit the data packets efficiently. This paper presents a detailed review of power and load-aware based multipath routing for MANET. Primarily, different power and load-aware multipath routing protocols designed by previous researchers for MANET are briefly studied. Then, a comparative analysis is conducted to understand the drawbacks in those protocols and suggest the new solution to improve the multipath routing in MANET with high network performance.

     

     

     
  • References

    1. [1] Liu W, Zhang C, Yao G, & Fang Y (2011), “DELAR: A device-energy-load aware relaying framework for heterogeneous mobile ad hoc networksâ€, IEEE journal on selected areas in communications, 29(8), 1572-1584. https://doi.org/10.1109/MILCOM.2004.1495132.

      [2] Challal Y, Ouadjaout A, Lasla N, Bagaa M, & Hadjidj A (2011), “Secure and efficient disjoint multipath construction for fault tolerant routing in wireless sensor networksâ€, Journal of network and computer applications, 34(4), 1380-1397. https://doi.org/10.1016/j.jnca.2011.03.022.

      [3] Yi J, Adnane A, David S, & Parrein B (2011), “Multipath optimized link state routing for mobile ad hoc networksâ€, Ad hoc networks, 9(1), 28-47. https://doi.org/10.1016/j.adhoc.2010.04.007.

      [4] Lal C, Laxmi V, & Gaur MS (2012), “A node-disjoint multipath routing method based on AODV protocol for MANETsâ€, In 2012 IEEE 26th International Conference on Advanced Information Networking and Applications, pp. 399-405. https://doi.org/10.1109/AINA.2012.49.

      [5] Devi PR, & Rao DS (2012), “QOS enhanced hybrid multipath routing protocol for mobile adhoc networksâ€, International Journal of Distributed and Parallel Systems, 3(6), 89. https://doi.org/10.5121/ijdps.2012.3608.

      [6] Chowdhury T, & Mukta RBM (2014), “A novel approach to find the complete node-disjoint multipath in AODVâ€, In 2014 IEEE International Conference on Informatics, Electronics & Vision (ICIEV), pp. 1-6. https://doi.org/10.1109/ICIEV.2014.6850858.

      [7] Su X, Peng G, & Chan S (2014), “Multi-path routing and forwarding in non-cooperative wireless networksâ€, IEEE Transactions on Parallel and Distributed Systems, 25(10), 2638-2647. https://doi.org/10.1109/TPDS.2013.200.

      [8] Tashtoush Y, Darwish O, & Hayajneh M (2014), “Fibonacci sequence based multipath load balancing approach for mobile ad hoc networksâ€, Ad Hoc Networks, 16, 237-246. https://doi.org/10.1016/j.adhoc.2013.12.015.

      [9] Arya V, & Gandhi C (2014), “NDj-AODV: Node disjoint multipath routing in Mobile Ad Hoc Networks based on AODV protocolâ€, In 2014 IEEE Seventh International Conference on Contemporary Computing (IC3), pp. 601-606. https://doi.org/10.1109/IC3.2014.6897241.

      [10] Barbudhe VK, Kumar A, Sisat SN, Bhopale P, Chalse RR, Talmale R, ... & Bapat AV (2014), “Node-disjoint Multipath Routing Method Based on AODV Protocolâ€, International Journal of Research in Advent Technology, 2(2). https://doi.org/10.1109/AINA.2012.49.

      [11] Deshmukh SR, & Raisinghani VT (2014), “EALBM: Energy aware load balancing multipath routing protocol for MANETsâ€, In 2014 IEEE Eleventh International Conference on Wireless and Optical Communications Networks (WOCN), pp. 1-7. https://doi.org/10.1109/WOCN.2014.6923061.

      [12] Yu Y, & Liang M (2015), “A Node-Disjoint Multipath Routing Protocol in MANETsâ€, In 2015 IEEE International Conference on Computer Science and Mechanical Automation (CSMA), pp. 108-112. IEEE. https://doi.org/10.1109/CSMA.2015.28.

      [13] Arora B (2015), “An adaptive transmission power aware multipath routing protocol for mobile ad hoc networksâ€, Procedia Computer Science, 57, 1242-1248. https://doi.org/10.1016/j.procs.2015.07.424.

      [14] Gopinath S, & Nagarajan N (2015), “Energy based reliable multicast routing protocol for packet forwarding in MANETâ€, Journal of Applied Research and Technology, 13(3), 374-381. https://doi.org/10.1016/j.jart.2015.07.003.

      [15] Bheemalingaiah M, Naidu MM, Rao DS, Vishvapath P, & Uniersity JNT (2016), “Energy Aware On-Demand Multipath Routing Protocol in Mobile Ad Hoc Networksâ€, International Journal of Computer Networks and Wireless Communications, 6(5), 14-33.

      [16] Mounagurusamy K, & Eswaramurthy K (2016), “A Novel Load Balancing Scheme for Multipath Routing Protocol in MANETâ€, Journal of computing and information technology, 24(3), 209-220. https://doi.org/10.20532/cit.2016.1002497.

      [17] Salem MA, & Yadav R (2016), “Efficient load balancing routing technique for mobile ad hoc networksâ€, International Journal of Advanced Computer Science and Applications, 7(5), 249-254. https://doi.org/10.14569/IJACSA.2016.070535.

      [18] Benakappa SM, & Kiran M (2017), “An energy-aware node disjoint multipath routing protocol for MANETs with dynamictransmission range adjustmentâ€, In 2017 IEEE International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT), pp. 335-341. https://doi.org/10.1109/ICEECCOT.2017.8284523.

      [19] Bheemalingaiah M, Naidu MM, Rao DS, & Vishvapathi P (2017), “Performance Analysis of Power-Aware Node-Disjoint Multipath Source Routing in Mobile Ad Hoc Networksâ€, In 2017 IEEE 7th International Advance Computing Conference (IACC), pp. 361-371. https://doi.org/10.1109/IACC.2017.0084.

      [20] Shinde M, & Jain S (2017), “PALBMRP: Power Aware Load Balancing Multipath Routing Protocol for MANETâ€, International Journal of Advanced Networking and Applications, 9(1), 3329-3334.

      [21] Jabbar WA, Ismail M, & Nordin R (2017), “Energy and mobility conscious multipath routing scheme for route stability and load balancing in MANETsâ€, Simulation Modelling Practice and Theory, 77, 245-271. https://doi.org/10.1016/j.simpat.2017.07.001.

      Ali HA, Areed MF, & Elewely DI (2018), “An on-demand power and load-aware multi-path node-disjoint source routing scheme implementation using NS-2 for mobile ad-hoc networksâ€, Simulation Modelling Practice and Theory, 80, 50-65. https://doi.org/10.1016/j.simpat.2017.09.005

  • Downloads

  • How to Cite

    Kumar. S, S., & G, R. (2019). A survey on power and load-aware multipath node-disjoint routing protocol for MANET. International Journal of Engineering & Technology, 7(4), 5494-5500. https://doi.org/10.14419/ijet.v7i4.28111