Extended state observer based control for DC motors

  • Authors

    • Ajay Y. Borkar Research ScholarDr. Babasaheb Ambedkar Marathwada University, Aurangabad, india
    • Dr. P.M Patil Professor, Department of Electronics and Telecommunication , JSPM’S Jayawantrao Sawant College Of Engineering, Hadapsar, Pune, india
    2019-08-03
    https://doi.org/10.14419/ijet.v7i4.28220
  • DC Motor Control, Extended State Observer, Nonlinear ESO, Position Control.

  • Abstract

    In this paper, an extended state observer (ESO) based control is derived for the position control of permanent magnet direct current (PMDC) motor. The implementation of the proposed control law requires only position sensor. The estimation of states and disturbance is achieved by ESO. The closed loop stability of the proposed scheme is derived. The performance of observer-controller is verified in the presence of uncertainties and load disturbance.

     

     

  • References

    1. [1] M. Iwasaki, K. Seki, and Y. Maeda, “High-precision motion control techniques: A promising approach to improving motion performance,†IEEE Industrial Electronics Magazine, vol. 6, no. 1, pp. 32–40, 2012. https://doi.org/10.1109/MIE.2012.2182859.

      [2] C. Hu, B. Yao, and Q. Wang, “Adaptive robust precision motion control of systems with unknown input dead-zones: A case study with comparative experiments,†IEEE Transactions on Industrial Electronics, vol. 58, no. 6, pp. 2454–2464, 2011. https://doi.org/10.1109/TIE.2010.2066535.

      [3] A. Hughes and W. Drury, Electric motors and drives: fundamentals, types and applications. 1em plus 0.5em minus 0.4em Newnes, 2013. https://doi.org/10.1016/B978-0-08-098332-5.00001-2.

      [4] J. Yao, Z. Jiao, D. Ma, and L. Yan, “High-accuracy tracking control of hydraulic rotary actuators with modeling uncertainties,†IEEE/ASME Transactions on Mechatronics, vol. 19, no. 2, pp. 633–641, 2014. https://doi.org/10.1109/TMECH.2013.2252360.

      [5] S. Villwock and M. Pacas, “Time-domain identification method for detecting mechanical backlash in electrical drives,†IEEE Transactions on Industrial Electronics, vol. 56, no. 2, pp. 568–573, 2009. https://doi.org/10.1109/TIE.2008.2003498.

      [6] W. Sun, Z. Zhao, and H. Gao, “Saturated adaptive robust control for active suspension systems,†IEEE Transactions on Industrial Electronics, vol. 60, no. 9, pp. 3889–3896, 2013. https://doi.org/10.1109/TIE.2012.2206340.

      [7] G. Tao and F. L. Lewis, Adaptive control of nonsmooth dynamic systems. Springer Science & Business Media, 2013.

      [8] S. E. Talole, J. P. Kolhe, and S. B. Phadke, “Extended-state-observer-based control of flexible-joint system with experimental validation,†IEEE Transactions on Industrial Electronics, vol. 57, no. 4, pp. 1411–1419, 2010. https://doi.org/10.1109/TIE.2009.2029528.

      [9] A. Radke and Z. Gao, “A survey of state and disturbance observers for practitioners,†in American Control Conference, 2006, IEEE, 2006, pp. 6–pp.11. https://doi.org/10.1109/ACC.2006.1657545.

      [10] S. Li, J. Yang, W.-H. Chen, and X. Chen, Disturbance observer-based control: methods and applications. CRC press, 2014.

      [11] J. Han, “From pid to active disturbance rejection control,†IEEE transactions on Industrial Electronics, vol. 56, no. 3, pp. 900–906, 2009. https://doi.org/10.1109/TIE.2008.2011621.

      [12] B.-Z. Guo and Z.-l. Zhao, “On the convergence of an extended state observer for nonlinear systems with uncertainty,†Systems & Control Letters, vol. 60, no. 6, pp. 420–430, 2011. https://doi.org/10.1016/j.sysconle.2011.03.008.

      [13] M. W. Spong, S. Hutchinson, M. Vidyasagar et al., Robot modeling and control. Wiley New York, 2006.

      [14] B. Barmish and G. Leitmann, “On ultimate boundedness control of uncertain systems in the absence of matching assumptions,†IEEE Transactions on Automatic Control, vol. 27, no. 1, pp. 153–158, 1982. https://doi.org/10.1109/TAC.1982.1102862.

  • Downloads

  • How to Cite

    Y. Borkar, A., & P.M Patil, D. (2019). Extended state observer based control for DC motors. International Journal of Engineering & Technology, 7(4), 7028-7033. https://doi.org/10.14419/ijet.v7i4.28220

    Received date: 2019-03-05

    Accepted date: 2019-04-11

    Published date: 2019-08-03