Obtaining and study of physical-mechanical properties of paint materials on the basis of domestic petroleum bitumen

  • Authors

    • K. K. Syrmanova M. Auezov South Kazakhstan State University
    • A. B. Agabekova M. Auezov South Kazakhstan State University
    • A. S. Sakibayeva M. Auezov South Kazakhstan State University
    • Z. B. Kaldybekova M. Auezov South Kazakhstan State University
    • Y. T. Botashev M. Auezov South Kazakhstan State University
    • S. B. Baizhanova M. Auezov South Kazakhstan State University
    2019-05-27
    https://doi.org/10.14419/ijet.v7i4.28734
  • Oil Bitumen, Paint Materials, Viscosity, Water Absorption, Swelling, Strength, Adhesion.

  • Abstract

    The article is devoted to the study of obtaining and study of physical and mechanical properties of paint materials on the basis of domestic petroleum bitumen. The expansion of the fields of application of bituminous materials is becoming more relevant due to the methods of regulation and physico-mechanical and adhesive-strength properties. The study of physical and mechanical properties of bituminous paint materials showed that water absorption changes in almost 3.5 times (from 0.03% to 0.11%), and their viability in the studied temperature range remains sufficient for the application of several layers of film from the prepared compositions. At the same time, all of them far exceed the known compositions in terms of impact strength and the magnitude of water absorption. Heat resistance of coatings does not reduce. And its value is within the permissible limits of temperatures used in technological processes.

     

     

  • References

    1. [1] Kapustin, V. M.; Tonkonogov, B. P.; Fuks, I. G. Technology of oil processing: Educ. publ. in 4 parts. Part three. Production of oil lubricants. Moscow: Chemistry. 2014, 328.

      [2] Markov, S. V. Methodical bases of the analysis of efficiency of production of bituminous materials. Oil,Gas and Business. 2009, 57.

      [3] Syrmanova, K. K.; Rivkina, T. V. Commercial petroleum products: Textbook, Shymkent: Publishing house "Alem". 2016, 191.

      [4] Syrmanova, K. K.; Botashev, E. T.; Kemalov, A. F.; Kaldybekova, Zh. B. Characteristics of the processes of structure formation of modified bitumen. International scientific-practical conference "Auezov readings-15: the Third modernization of Kazakhstan - new concepts and modern solutions", dedicated to the 120th anniversary of M. O. Auezov. Shymkent. 2017, 259-262.

      [5] Karyakina, M. I. Laboratory workshop on testing of paints and coatings. M., Chemistry. 1977, 240.

      [6] Gorelik, S.S.; Rastorguyev L.N.; Skakov, Y.A. X-ray and electron-optical analysis. Metallurgy. 1970, 366.

      [7] Myrzakhodzha, D.A.; Mirzakhodzhayev A.A. Modern research methods. Almaty. 2006, 306.

      [8] Grosby, N.; Davy. J.; Hardcastle W. Quality in the Analytical Chemistry Laboratory. ACOL. 2005, 216.

      [9] Yegorov, O.I.; Chigarkina O.A.; Baimukanov, A.S. Oil and gas complex of Kazakhstan: Development problem and efficiency of functioning. Almaty. 2003, 536.

      Syrmanova, K.K.; El-Sayed M. Negim, Tuleuov, A. M. The development of composite polymer materials for anti-corrosion protection of oil and gas pipelines. Proceedings of international conference «Application of Efficient & Renewable Energy Technologies in Low Cost Buildings and Construction». Turkey. 2013, 486-490

  • Downloads

  • How to Cite

    K. Syrmanova, K., B. Agabekova, A., S. Sakibayeva, A., B. Kaldybekova, Z., T. Botashev, Y., & B. Baizhanova, S. (2019). Obtaining and study of physical-mechanical properties of paint materials on the basis of domestic petroleum bitumen. International Journal of Engineering & Technology, 7(4), 6243-6247. https://doi.org/10.14419/ijet.v7i4.28734

    Received date: 2019-04-02

    Accepted date: 2019-04-08

    Published date: 2019-05-27