Synthesis and Surface Morphology of The Precursors of the N-Alkylated Isoindigo

 
 
 
  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract


    Isoindigo has been longly applied as the dying agent and recently introduced as an electron accepting unit of the conjugated polymers. For the later purpose, the isoindigo was generally alkylated before undergone polymerization. The purity, chemical structure, and the surface morphology of the alkylated isoindigo and its precursors was confirmed and studied through the thin layer chromatography, FTIR, NMR and SEM. Based on the micrograms, the straw-liked regular structure of oxindole has been transformed into irregular box-shaped isoindigo when two oxindole were coupled with each other at the particular position.

     

     


  • Keywords


    Alkylation, isoindigo, oxindole

  • References


      [1] Kedar, J. G. Synthesis of Monomers for New Conjugated Polymers. Chemical Social Revision, 2012. 39:2354.

      [2] Miles, R. W., Zoppi, G., & Forbes, I. Inorganic photovoltaic cells The inorganic semiconductor materials used to make photovoltaic cells. Materials Today, 2007. 10(11), p. 20-27.

      [3] Dang, D., Fan, J., Wang, X., Xiao, M., Shi, J., & Zhou, P. Influence of the fused hetero-aromatic centers on molecular conformation and photovoltaic performance of solution-processed organic solar cells. 2016.

      [4] Jung, J. W., Jo, J. W., Jung, E. H., & Jo, W. H. Recent progress in high efficiency polymer solar cells by rational design and energy level tuning of low bandgap copolymers with various electron-withdrawing units. Organic Electronics: Physics, Materials, Applications, 2016. 31, p. 149-170.

      [5] Deng, Y., Liu, J., Wang, J., et al. Dithienocarbazole and Isoindigo based Amorphous Low Bandgap Conjugated Polymers for Efficient Polymer Solar Cells Dithienocarbazole and Isoindigo based Amorphous Low Bandgap Conjugated Polymers for Efficient Polymer Solar Cells. 2014.

      [6] Sun, Y., Lin, B., Yang, H., & Gong, X. Improved bulk-heterojunction polymer solar cell performance through optimization of the linker groupin donor-acceptor conjugated polymer. Polymer. 2012. 53(7). p. 1535-1542.

      [7] Li, W., Zhou, Y., Viktor Andersson, B., Mattias Andersson, L., Thomann, Y., Veit, C., … Zhang, F. The Effect of additive on performance and shelf-stability of HSX-1/PCBM photovoltaic devices. Organic Electronics, 2011. 12(9), p. 1544-1551.

      [8] Heeger, A. J. Semiconducting polymers: the Third Generation. Chemical Society Review, 2010. 39. p. 2354-2371.

      [9] Cao, K., Wu, Z., Li, S., Sun, B., Zhang, G., & Zhang, Q. A low bandgap polymer based on isoindigo and bis (dialkylthienyl) benzodithiophene for organic photovoltaic applications. Journal of Polymer Science, Part A: Polymer Chemistry, 2013. 51(1). p. 94-100.

      [10] Grenier, F., Berrouard, P., Pouliot, J. -R., Tseng, H. -R., Heeger, A. J., & Leclerc, M. Synthesis of new n-type isoindigo copolymers. Polymer Chemistry, 2012. 4(6), p. 1836-1841.

      [11] Mei, J., Graham, K. R., Stalder, R., & Reynolds, J. R. Synthesis of Isoindigo-Based Oligothiophenes for Molecular Bulk Heterojunction Solar Cells. Organic Letters, 2010. 12(4), p. 660-663.

      [12] Maes, V., Pirotte, G., Brebels, J., Verstappen, P., Lutsen, L., Vanderzande, D., & Maes, W.. Synthesis of N , N ’-dialkyl-6,6’-dibromoisoindigo derivatives by continuous flow. Journal of Flow Chemistry, 2015. 5(4), p. 201-209.

      [13] Sonar, P., Tan, H.-S., Sun, S., Lam, Y. M., & Dodabalapur, A. Isoindigo dye incorporated copolymers with naphthalene and anthracene: promising materials for stable organic field effect transistors. Polymer Chemistry, 2013. 4(6), 1983.

      [14] Mahmood, K., Liu, Z. P., Li, C. H., Lu, Z., Fang, T., Liu, X., … Bo, Z. S. Novel isoindigo-based conjugated polymers for solar cells and field effect transistors. Polymer Chemistry, 2013, 4(12), p. 3563-3574.


 

View

Download

Article ID: 29235
 
DOI: 10.14419/ijet.v7i4.38.29235




Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.