Modal Analysis for Assessing the Durability of an Automobile Coil Spring Under Random Load

  • Authors

    • R. Manouchehry Nya
    • S. Abdullah
    • S. S.K. Singh
    https://doi.org/10.14419/ijet.v7i4.36.29358
  • coil spring, critical plane strain, durability, modal analysis, random load.

  • Abstract

    The aim of this paper is to analyse modal analysis for assessing the durability of an automobile coil spring under random load. Coil spring is subjected to unpredictable loads and random loads; therefore, fatigue life assessment was investigated as a problem in ground vehicle suspension systems. It is important to design coil springs as vital part of ground motor vehicles. In this study, steel SAE 5160 alloy selected as material properties. Finite element analysis was carried out to determine maximum stress/strain von Mises by using linear static approach.  The original strain-time history signal captured from coil spring of a car during service load. A power spectral density function obtained to analyse modal participations using specific software based on strain history signal. The Coffin-Manson strain life model performed to analyse fatigue life and damage. The results show that maximum fatigue life take-place about    cycles based on critical plane strain at critical point.

     

     

  • References

    1. J. Karthik, K. Chaitanya, and C. T. Sasanka, "Fatigue life prediction of a parabolic spring under non-constant amplitude proportional loading using finite element method," International Journal of Advanced Science and Technology, vol. 46, pp. 143-156, (2012).

      [2] C. Xie and P. Xue, "An accurate and efficient computational method for structural dynamic stresses under random loading," Aerospace Science and Technology, vol. 59, pp. 11-17, (2016).

      [3] S.-I. Moon, I.-J. Cho, and D. Yoon, "Fatigue life evaluation of mechanical components using vibration fatigue analysis technique," Journal of mechanical science and technology, vol. 25, pp. 631-637, (2011).

      [4] J. Wannenburg and P. S. Heyns, "An overview of numerical methodologies for durability assessment of vehicle and transport structures," International Journal of Vehicle Systems Modelling and Testing, vol. 5, pp. 72-101, (2010).

      [5] F. Cianetti, A. Alvino, A. Bolognini, M. Palmieri, and C. Braccesi, "The design of durability tests by fatigue damage spectrum approach," Fatigue & Fracture of Engineering Materials & Structures, (2017).

      [6] A. Ince and G. Glinka, "A modification of Morrow and Smith–Watson–Topper mean stress correction models," Fatigue & Fracture of Engineering Materials & Structures, vol. 34, pp. 854-867, (2011).

      [7] S.-P. Zhu, Q. Lei, H.-Z. Huang, Y.-J. Yang, and W. Peng, "Mean stress effect correction in strain energy-based fatigue life prediction of metals," International Journal of Damage Mechanics, vol. 26, pp. 1219-1241, (2017).

      [8] R. R. Magalhaes, C. H. Fontes, and S. A. Vieira de Melo, "Stress analysis using BEM as support for fatigue life prediction in the automotive industry," International Journal of Vehicle Systems Modelling and Testing, vol. 8, pp. 88-103, (2013).

      [9] F. Kagnici, "Vibration Induced Fatigue Assessment in Vehicle Development Process," International Journal of Engineering and Applied Science, v6, pp. 229-234, (2012).

      [10] M. Kamal and M. Rahman, "Finite element-based fatigue behaviour of springs in automobile suspension," International Journal of Automotive and Mechanical Engineering, vol. 10, p. 1910, (2014).


  • Downloads

  • How to Cite

    Manouchehry Nya, R., Abdullah, S., & S.K. Singh, S. (2018). Modal Analysis for Assessing the Durability of an Automobile Coil Spring Under Random Load. International Journal of Engineering & Technology, 7(4.36), 1496-1501. https://doi.org/10.14419/ijet.v7i4.36.29358

    Received date: 2019-05-26

    Accepted date: 2019-05-26