Influence of form deviations on the tolerance analysis

  • Abstract
  • Keywords
  • References
  • PDF
  • Abstract

    The objective of this paper is to present the influence of form deviations on the tolerance analysis of an assembly. For this we will study initially the tolerance analysis using the deviations and clearances domains method, a second time we will integrate the influence of form tolerances on the allowable deviation domain. To illustrate this analysis we used a classical assembly with position and form tolerances (coaxiality and cylindricity). Finally a comparative study between the two cases was illustrated.

    Keywords:Tolerance Analysis, CAD/CAM, Assembly Systems, Engineering Drawings.

  • References

    1. Petit J-P,Geometric Product Specification: method of analysis of tolerances. Application computer-aided design , PhD Thesis of Mechanical Engineering, University of Savoie, 2004
    2. M. Chahbouni, S. Boutahari and D. Amegouz,Analysis of geometric tolerances by The Deviations and Clearance Domains Method, 11th Conference of Mechanics, Agadir 2013.
    3. P.BOURDET and A.CLEMENT,controling a complex surface with a 3 axis measuring machine, annals of the CIRP, Vol 25, Manufacturing technology P 359, Janvier 1976.
    4. P.BOURDET , L. MATHIEU ,C. LARTIGUE and A. BALLU , The concept of the small displacement torsor in metrology, proceeding of international euro conference advanced mathematical tools in metrology ,oxford 27-30 septembre 1995
    5. E.PAIREL,Proposition of a new semantic for standardized tolerancing _ principle of its verification on coordinate measuring machines, 7th International Congress of Metrology, PP 76-81, 1995.
    6. StephaneMorire, contribution to the study of joints with consideration of the form defects: modeling and experiments, PhD of the University of Mediterane2010
    7. J. Grandjean, Y. Ledoux and S. Samper,Influence the form defects in joints flat surfaces, the 20th Congress of Mechanics French, Besanon 2011.
    8. Gupta, S.ansTourner and J.U,variational solid modling for tolerance analyses,IEEE comput, graphic application1993, 13(3), 64-74.
    9. Huang, W. and Ceglarek,D. Mode-based decomposition of part form error by discrete-cosine-transform with implementation to assembly and stamping system with compliant parts, CIRP Ann., 2002, 51, 21-26.
    10. ISO 10110-5 Optics and optical instruments,Preparation of drawings for optical elements and systems Part 5: Surface form tolerances, International Organization for Standardization, 1996.
    11. Henke, R.P., Summerhays, K.D., Baldwin, J.M., Cassou, R.M. and Brown, C.W,Methods for evaluation of systematic geometric deviations in machined parts and their relationships to process variables, Prcis. Eng., 1999, 23, 273-292.
    12. Frederic GERMAIN,three-dimensional statistical tolerancing, integration in CFAO, PhD University of Savoie, October 2007.




Article ID: 2969
DOI: 10.14419/ijet.v3i3.2969

Copyright © 2012-2015 Science Publishing Corporation Inc. All rights reserved.