Dynamic modeling and simulation of 10hp induction motor driving a variable load

  • Authors

    • Oti Stephen Ejiofor University of Nigeria , Nsukka.
    • Eya Candidus University of Nigeria, Nsukka
    • Agada Stephen University of Nigeria, Nsukka
    • Uche Ogbuefi University of Nigeria, Nsukka
    • Ugwuja Peter University of Nigeria, Nsukka
    2020-01-11
    https://doi.org/10.14419/ijet.v9i1.30176
  • Induction Motor, Performance, Induction, Driving Load, Torque.
  • This work presents ideally the behavioral characteristics of induction motor (IM) when subjected to different loading conditions. The task is achieved via mathematical modeling of the process using the Simulink tool of the Matlab. Dynamic model is generally used to study the steady state and transient behavior of induction motor. Here, Clarke and Park’s transformation of stator and rotor parameters on the synchronously rotating reference frame is applied to the developed mathematical model of the induction motor. First, the differential equations of voltages, currents and flux linkages between the stationary stator and rotating rotor are developed, followed by the mechanical equation of torque and speed. Thereafter the mathematical model developed with the help of the software is generally used to study the variation in parameters value on the dynamic performance of the induction motor as variable load is driven. The obtained simulated results apart from the exhibited performances still suggests that the synchronously rotating reference frame theory is actually a shrewd process to validate the dynamic behavior of the induction motor.

     

     

     

  • References

    1. [1] S.E. Oti, C.A. Nwosu and D.B. Nnadi, Dynamics and Performance Characteristics of a 5hp Induction Machine, Elixir International Journal, Electrical Engineering. 115 (2018), pp. 49686-49689.

      [2] C.U. Ogbuka, “Dynamic Modeling and Simulation of a 3-HP Asynchronous Motor Driving a Mechanical Loadâ€, Department of Electrical Engineering, University of Nigeria, Nsukka.

      [3] S. E. Oti, C.A. Nwosu, D.B. Nnadi Damian, V. Madueme , Simulating performance characteristics of induction motor under a balanced load by direct on-line starting, International Journal of Engineering &Technology, 7 (4) (2018) 6851-6855, doi: 10.14419/ijet.v7i4.27100.

      [4] A.A. Ansari and D.M. Desphande, “Mathematical Model of Asynchronous Machine in MATLAB SIMULINKâ€, International Journal Engineering Science and Technologyâ€, Vol. 2(5), 2010, pp. 1260-1267.

      [5] S. Gupta and Dr. S. Walhwani, “Dynamic Modeling of Induction Motor Using Rotor Rotating Reference Frameâ€, International Journal of Advance Research in Electrical, Electronics and Instrumentation Engineering, Vol. 3, Issue 6, June 2014.

      [6] S.E. Oti, C. A. Nwosu, D.B. Nnadi and O.I. Okoro, Performance study of three-phase induction motor driving a load, Discovery, 2019, 55(282), pp. 279-290.

      [7] S.E. Oti, Thermal modelling of Induction Machine using the Lumped Parameter Model, Doctorate Degree Thesis, University of Nigeria, Nsukka, December 2014, pp. 1-140.

      [8] A. Aktaibi and D. Ghanim, “Dynamic Simulation of a Three Phase Induction Motor Using Matlab Simulinkâ€, Faculty of Engineering and Applied Science, Memorial University of Newfoundland St. John’s NL, Canada, AIB3X5.

      [9] Oti S.E, Akpama E.J. Nnadi D. B., Performance Characteristic of Induction Motor under a Balanced Load by Star-Delta Starting: International Journal of Engineering and Management Research (IJEMR), Vol. 6, Issue 1, January-February 2016, pp. 30-34.

      [10] O.I. Okoro, Steady State and Transient Analysis of Induction Motor Driving a Pump Load, Nigerian Journal of Technology, NIJOTECH, Vol. 22, No. 1, March 2003, pp.46-53.

      [11] https://www.shodhganga.inflibnet.ac.in//11_chapter3/Dynamic_modelling_of_induction_motor. Retrieved on April 2017.

      [12] H. L. Stewart, Pumps, Indianapolis: Sams, 1977, pp. 465.

      [13] A. A. Divona and A. J. Dolan, “Electric motors and motor controls,†In: Karassik, I. J., Krutzsch, W. C., Fraser, W. H. and Messina, J. P. (Eds.), Pump Handbook, pp. 6.3-6.25, NY: McGraw Book Company, 1985.

      [14] B. K. Bose, Modern Power Electronics and AC Drives, Englewood Cliffs, NJ: Prentice-Hall PTR, 2001.

      [15] V. Vodovozov and I. Bakman, Performance Improvement of Pumps Fed by the Variable Speed Drives, Electrical, Control and Communication Engineering ,2013 / 4 45, doi: 10.2478/ecce-2013-0021. https://doi.org/10.2478/ecce-2013-0021.

      [16] P.B. Deb and S. Sarker, “Dynamic Model Analysis of Three Phase Induction Motor Using Matlab/Simulinkâ€, International Journal of Scientific and Engineering Research, Vol. 7, issue 3, March 2016.

      [17] Krause, P.C., O. Wasynczuk, and S.D. Sudhoff, Analysis of Electric Machinery, IEEE Press, 2002. https://doi.org/10.1109/9780470544167.

  • Downloads

  • How to Cite

    Stephen Ejiofor, O., Candidus, E., Stephen, A., Ogbuefi, U., & Peter, U. (2020). Dynamic modeling and simulation of 10hp induction motor driving a variable load. International Journal of Engineering & Technology, 9(1), 17-25. https://doi.org/10.14419/ijet.v9i1.30176