Efficient manufacturing of automobile spark plugs : A six-sigma materials re-engineering case

  • Authors

    2016-08-08
    https://doi.org/10.14419/ijet.v5i3.5898
  • Six-Sigma, Re-Engineering, Automobil Industry, Spark Plugs, Niquel Alloys.

  • Abstract

    The processing defects of an World-class spark plugs-producing company are described, in terms of the Technology Management challenges involved. The full analysis of this complex situation, which involved 3 plants within the same factory, in terms of a Six Sigma approach, is explained, as well as the simple rengineering proposal, which led to an improvement from 2.47 Sigma to 5.32 Sigma in some specific cases, along with significant savings due to less product rejection and waste material.

  • References

    1. [1] I. Calliari, a, , M. Zanescoa, M. Dabalà a, K. Brunellia and E. Ramousa, Investigation of microstructure and properties of Ni-Mo martensitic stainless steel, Mater. & Design, 29, 246-250 (2008). http://dx.doi.org/10.1016/j.matdes.2006.11.020.

      [2] Z.-L. Zhan and J. Tong , A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations. Part I: Evaluation and determination of material parameters, Mech. of Mater., 39, 64-72 (2007). http://dx.doi.org/10.1016/j.mechmat.2006.01.005.

      [3] Z.-L. Zhan and J. Tong, A study of cyclic plasticity and viscoplasticity in a new nickel-based superalloy using unified constitutive equations. Part II: Simulation of cyclic stress relaxation, Mech. of Mater., 39, 73-80 (2007). http://dx.doi.org/10.1016/j.mechmat.2006.01.006.

      [4] S. Nemat-Nasser and W.G. Guo Superelastic and cyclic response of NiTi SMA at various strain rates and temperaturas, Mech. of Mater., 38, 463-474 (2006). http://dx.doi.org/10.1016/j.mechmat.2005.07.004.

      [5] H. Sehitoglu, C. Efstathiou, H.J. Maier and Y. Chumlyakov, Hysteresis and deformation mechanisms of transforming FENACOTI, Mech. of Mater., 38, Issues 5-6, 538-550 (2006). http://dx.doi.org/10.1016/j.mechmat.2005.05.024.

      [6] W. Friend, Corrosion of nickel and nickel-base alloys, John Wiley, New York City (1980).

      [7] A.R. Burkin, Extractive metallurgy of nickel, John Wiley, New York City (1987).

      [8] S. Chowdohury, The Power of Six Sigma, Dearborn-Kaplan Business, Chicago (2001).

      [9] M. Hammer and J. Champy, Rengineering the Corporation: A Manifesto for Business Revolution, Harper Collins, New York City (2003).

      [10] E. L. Grant and R.S. Leavenworth, Statistical Quality Control, Mass Market, Boston (2004).

      [11] T. Yamane, Statistics: An Introductory Analysis, Longman, London (1973).

      [12] A.H. Bowker and G.J. Lieberman, Engineering Statistics, John Wiley, New York City (2003).

      [13] D.C. Montgomery, Design and Analysis of Experiments, John Wiley, New York City (2000).

      [14] Design of experiments, Vol. 1: Taguchi Approach, Daimler Chrysler Internal Report (1997).

      [15] Potencial Failure Mode and Effects Analysis, FMEA Reference Manual, AIAG (2002)

      [16] Statistical Process Control (SPC), Reference Manual, AIAG (2002)

      [17] H. Kume, Statistical Methods for Quality Improvement, Chapman and Hall, London (1992)

      [18] R. Berrúm, M.Sc. Thesis (Mechanical Engineering), Universidad Nacional Autónoma de México, Cuautitlán (2009).

  • Downloads

  • How to Cite

    Berrúm, R., & Castano, V. (2016). Efficient manufacturing of automobile spark plugs : A six-sigma materials re-engineering case. International Journal of Engineering & Technology, 5(3), 83-91. https://doi.org/10.14419/ijet.v5i3.5898

    Received date: 2016-02-17

    Accepted date: 2016-05-24

    Published date: 2016-08-08