Study of the mechanical performance and analysis of hybrid natural snake grass-jute-glass fiber strengthened polyester composite

  • Authors

    • C. Thiruvasagam
    • S. Prabagaran
    • P. Suresh
    2017-12-21
    https://doi.org/10.14419/ijet.v7i1.1.8928
  • Snake Grass, Glass Fiber, Mechanical Properties, Reinforcement.
  • The research paper involves fiber composites form a special category materials that are contributing to present swaping of manufactured  hybrid  which finds traditional and non traditional applications. The study explains which are accentuates and optimizing for the recently recognized snake grass standard materials. In this article, the prospecting performance characterization of SG fiber is selected and contrasted as per the ASTM standard. This study additionally manages the examination apply different phenomena of this stages in Jute and snake as fortifications utilized index ended a try. Experiments have been conducted on normal Filaments, snake grass, Glass Fiber and Jute to analyse their Mechanical properties. The common strands are orchestrated in the flat and vertical heading as transferred quality on all sides. Microstructural analysis of these hybrid composite is observed using Scanning  Electron Microscope that reveals bonding and Filament breaksge, Voids and Fiber decover which are further investigated.

  • References

    1. [1] El-Tayeb NSM, “A study on the potential of sugar cane fibers/polyester composite for tribological applicationsâ€, Wear, Vol.265, No.1–2, (2008), pp.223–235.

      [2] Iricula M, Malhotra SK, Joseph K & Thomas S, “Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fiber reinforced polyester compositesâ€, Compos Sci Technol, Vol.65, No.7–8, (2005), pp.1077–1087.

      [3] Kaddami H, Dufresne A, Khelifi B, Bendahou A, Taourirte M, Raihane M, Issartel N, Sautereau H, Gerard JF & Sami N, “Short palm tree fibers–Thermoset matrices compositesâ€, Composites Part A:Applied Science and Manufacturing, Vol.37, No.9, (2006), pp.1413-1422.

      [4] Surendar, A., Arun, M., Basha, A.M.â€Micro sequence identification of bioinformatics data using pattern mining techniques in FPGA hardware implementationâ€,(2016) Asian Journal of Information Technology, 15 (1), pp. 76-81.

      [5] Yousif BF & Ku H, “The suitability of using coir fiber/polymer composite for the design of liquid storage tanksâ€, Mater Des, Vol.36, (2012), pp.847–853.

      [6] Prabu, G., Surendar, A.â€Virus detection by using a pattern matching algorithm for network securityâ€,(2015) International Journal of Applied Engineering Research, 10 (10), pp. 9565-9569.

      [7] Herrera-Franco PJ & Valadez-Gonzalez A, “A study of mechanical properties of short natural fiber reinforced compositesâ€, Compos B, Vol.36, (2005), pp.597–608.

      [8] Alawar A, Hamed AM & Al-Kaabi K, “Characterization of treated date palm tree fiber as composite reinforcementâ€, Compos: Part B Eng, Vol.40, No.7, (2009), pp.601–606.

      [9] Surendar, A., Arun, M.â€FPGA based multi-level architecture for next generation DNA sequencingâ€,(2016) Biomedical Research (India), 2016, pp. S75-S79.

      [10] Venkateshwaran N, ElayaPerumal A, Alavudeen A & Thiruchitrambalam M, “Mechanical and water absorption behavior of banana/sisal reinforced hybrid compositesâ€, Materials & Design, Vol.32, No.7, (2011), pp.4017-4021.

      [11] Mallick PK & Broutman LJ, “Static and impact properties of laminated hybrid compositesâ€, J Test Eval, Vol.5, (1977), 190–200.

      [12] Sathishkumar TP, Navaneethakrishnan P & Shankar S, “Tensile and flexural properties of snake grass natural fiber reinforced isophthallic polyester compositesâ€, Composites Science and Technology, Vol.72, (2012), pp.1183–1190.

      [13] Sreenivasan VS, Ravindran D, Manikandan V & Narayanasamy R, “Mechanical properties of randomly oriented short Sansevieria cylindrical fiber/polyester compositesâ€, Materials and Design, Vol.32, (2011), pp.2444–2455.

      [14] Vijaya Ramnath B, Junaid Kokan S, Niranjan Raja R, Sathyanarayanan R, Elanchezhian C, Rajendra Prasad A & Manickavasagam VM, “Evaluation of mechanical properties of alpaca–jute–glass fiber reinforced epoxy compositeâ€, Materials and Design, Vol.51, (2013), pp.357–366.

      [15] Thwe MM & Liao K, “Durability of bamboo–glass fiber reinforced polymer matrix hybrid compositesâ€, Compos Sci Technol, Vol.63, (2003), 375–387.

      [16] Noorunnisa Khanam P, Mohan Reddy M, Raghu K, John K & Venkata Naidu S, “Tensile, flexure and compressive properties of sisal–silk hybrid compositesâ€, J ReinfPlast Comp, Vol.26, (2007), pp.1065–1070.

      [17] Pavithran C, Mukherjee PC & Brahma Kumar M, “Impact properties of sisal–glass hybrid laminatesâ€, J Mater Sci, Vol.26, (1991), pp.452–459.

      [18] Murali Mohan Rao K, Mohana Rao K & Ratna Prasad AV, “Fabrication and testing of natural fiber composites: Vakka, sisal, bamboo and bananaâ€, Materials and Design, Vo.31, (2010), pp.508–513.

      [19] Velmurugan R & Manikandan V, “Mechanical properties of Palmyra/glass fiber hybrid compositesâ€, Composites Part A, Vol.38, No.10, (2007), pp.2216–2226.

      [20] Boopalan M, Niranjanaa M & Umapathy MJ, “Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid compositesâ€, Composites: Part B, Vol.51, (2013), pp.54–57.

  • Downloads

  • How to Cite

    Thiruvasagam, C., Prabagaran, S., & Suresh, P. (2017). Study of the mechanical performance and analysis of hybrid natural snake grass-jute-glass fiber strengthened polyester composite. International Journal of Engineering & Technology, 7(1.1), 78-83. https://doi.org/10.14419/ijet.v7i1.1.8928